Eurolux O70SS Owner's manual

Brand: Eurolux

Model: O70SS

Type: Owner's manual

Louvred Bollard

ILLUSTRATIONS

ENVIRONMENTAL PROTECTION

Waste electrical & Electronic equipment regulations requires that any of our products showing this

marking must not be disposed of with other household or commercial waste. To prevent possible

harm to the environment or human health from uncontrolled waste disposal, please separate any

such products from other waste types and recycle it responsibly at your local facilities.

O70SS

PRODUCT CODE

Excluding: 1 x E27 maximum 60W 230V

Please read instructions before commencing installation and retain for

future reference.

Cape Town - 9 Racecourse Road, Milnerton, 7441

Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065

email: [email protected], web: www.eurolux.co.za

• Fitting: Stainless Steel with clear Plastic Lens / Lm304.

•Lamptype:Excluding 1 x E27 maximum 100W 230V

•Protectionagainstelectricshock: Class1. Requires earth connection

•IPRating: 44. Protected against solid foreign objects of 1.0mm Ø and greater. Protected against

splashing water.

•Voltage: 220V - 240V ~ 50Hz

•MaximumAmbienttemperaturerange: 200C - 400C

• Suitable for outdoor use

• Can be used in coastal areas and other corrosive environments.

•Dimensions:(H)1010mm x (Ø)150mm

• Before installation always ensure the power supply is turned off.

• Ensure the mounting surface is sturdy.

• 1. Main Feature

2.Technical Date

Rate Voltage:220V~ 240V,50Hz

Rate Power: 60W

Protection class:1

Lamp hold : E27

Installationxing:RawBoltMountedordrilledbase

3.Installation and maintenance preparing for installation

(1) Make sure the power is cut off before installation

 (2)Userapprorantecabletosupplythexture

(3) Mount the lantern on the post with screws.

(4) build a concrete block or prepare paving block

(5) Make the above with the base to drill the mounting holes.

(6) Pullthecablethroughthecenterofthemountingbaseensuringyouleavesufcientslack.

(7) Mount the base of the bollard to the concrete base.

(8) Alwaysensurethebaseofthettingisabovegroundlevel.

(9) Connect the cable to the terminal black provided in the Pole

(10) Tighten pole securly to base

(11) Remove top Part (Head) of Bollard,with the side screws

(12) Users should keep cleaning the glass and transparent lamp house oftenly.Don’t use the

 (13)Lightwithoutprotectioncoverchangeitimmediatelyifyoundanybroken.

4.Attention

(1) Turn off switch before changing the bulb.

(2) Open the top cover,screw the bulb out of the lamp hold carefully. Don’t touch the bulb with

bare hand. The bulb will be extremely hot after just turning out.

(3) Make sure the screws in foundation on securely fastened.

(4) Ensure base is base is above ground height.

SPECIFICATIONS INSTALLING YOUR FLOODLIGHT

O59B/O60B-attachments:

Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced

bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To

ensure that you get maximum longevity and maximum use out of your luminaire, please observe

the following safety instructions.

Electrical products can cause death, injury, or damage to property. Installation of the luminaire

mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion

ofinstallation,ensurethattheCerticateofComplianceisupdated.

• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds

with the mains voltage in your home.

• When changing the lamp, ensure that the power is turned off.

• This luminaire is checked in full for conformity to the quality standards and safety requirements.

• The manufacturer / supplier is not responsible for any damage of properties and persons,

caused by the incorrect use or installation of the luminaire.

• Should you be unsure of how to install this luminaire correctly, please consult a professional

electrician or your supplier for assistance.

• Ensure all items/ components, threads and screws are tightly secured.

IMPORTANT:

• Tampering with this luminaire, IE. Using silicon sealers or incorrect cabling, will invalidate

your warranty.

• When the protection glass is damaged, it should be replaced immediately. The luminaire must

not be used without the protection glass.

• Please check whether the connection of the power cord is safe and reliable before installation.

• Always ensure that the mains supply voltage is correct.

• Always replace the lamp with one of an identical rating.

• Ensure that you do not place the luminaire near any combustible materials and / or surfaces.

• Choking hazard: May contain small parts. Keep away from children.

•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis

product whilst it is connected to the electricity supply.

• Item may vary slightly from the picture on the carton.

IMPORTANT SAFEGUARDS

CLEANING

• Beforecleaningalwaysensurethepowersupplyisturnedoff.

• Donotimmersetheluminaire in water.

• Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.

• Ensurethattheluminaire does not come in contact with corrosive chemicals, etc.

• Coastalareasensurethattheluminaire is cleaned fortnightly.

• use Copper grease on all screws.

• Installe lamp and remount head.

Eurolux O70SS Owner's manual

Eurolux O70SS Owner's manual

Eurolux O70SS Owner's manual

Related papers

Other documents