•Fitting: Plastic / Steel with Press Steel Shade
•Lamptype: Excluding 1 x E27 maximum 60W 230V
•Voltage: 220V - 240V ~ 50Hz
•Protectionagainstelectricshock: Class 2. Does not require earthing
•IPRating: 20. Dust Protected. Protected against solid foreign objects of 12.5mm Ø and
greater. Not protected against water.
•Commercial/domesticuse
•Notsuitableforoutdooruse
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions: (H)800mm x (W)165mm x (D)400mm
•Features: Inline Switch
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Unpacktheluminaireandplaceontoaatsurface.
•Insertthespringsontotheanglepoisestem(1)&(2).
•Inserttheanglepoisebaseintothebase(3).
•Securethebasebrackettothebaseandstemwiththesupplied“L”pin(4)&(5)andensure
that all parts are tightly secured by screwing into place (6).
•Insertthelamp(7).
•Plugintotheelectricaloutlet.
•Toswitchthedesklampon:SettheOn/Offswitchto(ON)position.
•Toswitchthedesklampon:SettheOn/Offswitchto(OFF)position.
•BeforeunpluggingthedesklampfromthepowersupplysettheOn/Offswitchto
(OFF)position.
•Beforereplacingthelampalwaysunplugthedesklampfromthepowersupply
and allow to cool down.
•Ensurethatthecorrectlamptypeandwattageistted.
T20B/T20S/T20W-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the
luminairemustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.
Oncompletionofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingtheluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Ensurethatthecorrectlamptypeandwattageistted.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Ifyourmainswiringdiffersinanywayfromdiagram,consultaqualiedelectrician.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalratingandwattage.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis
product whilst it is connected to the electrical supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Coastalhumiditymayeffectthelongevityoftheluminaire.
SPECIFICATIONS
IMPORTANTSAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Useasoftclothtoclean.