Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
Chandelier
20 x 10W G4 12V~50Hz
MX2369/2
MODEL
C134W / C314CH
PRODUCT CODE
MODEL
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• Do not use detergent or abrasives for cleaning.
CLEANING AND MAINTANANCE
This appliance is only suitable for xed mounting.
Not for use outdoors or in areas exposed to moisture, EG: bathrooms or kitchens.
1: Ensure the main supply is switched off.
2: Insert plastic anchor onto the mounting surface. Test to ensure the mounting
surface will hold the weight of the tting.
3: Fix the bracket onto mounting surface with self-tapping screws (1).
4: Connect main supply wires to terminal block (2).
5: Fix the tting to the bracket with screws (3).
6: Fix the arms (4). Adjust the arms to a satisfactory position.
7: Fix the bulbs(5).
INSTALLING YOUR CHANDILIER
1
23
45
• Fitting: Steel base with chrome nish or white nish.
• Lamp Type: 20 x 10W G4 12V~50Hz.
• Protection against electric shock: Requires earth connection.
C214 attachments:
If the external exible Cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar qualied
person in order to avoid a hazard.
To ensure that you get maximum longevity and maximum use out of your luminaire,
please observe the following safety instructions.
Please save this instruction manual.
Electrical products can cause death, injury, or damage to property.
Installation of this product must be carried out by a qualied
electrician, in accordance with SANS 10142. On completion of
installation, ensure that the Certicate of Compliance is updated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label
corresponds with the mains voltage in your home.
• When changing the G4 12V lamps, ensure that the power is turned off.
• The luminaire is checked in full for conformity to the quality standards and
safety required.
• The manufacturer / supplier is not responsible for any damage of properties and
persons, caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a
professional electrician or your supplier for assistance.
• Ensure all items and screws are tightly secured.
• PLEASE NOTE: Tampering with this item will void your warranty.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
/
