IPOTEK SK512-W-N User manual

Type
User manual

IPOTEK SK512-W-N is an Internet hardware device specially designed for smart phone control of family appliances. With mobile phone software, you can remotely control the on/off status of power sockets and lights, as well as adjust the light and color temperature of lights, all through your phone interface. Additionally, you can set up timers for your appliances and create customized usage scenarios to enjoy the convenience of a smart home system.

IPOTEK SK512-W-N is an Internet hardware device specially designed for smart phone control of family appliances. With mobile phone software, you can remotely control the on/off status of power sockets and lights, as well as adjust the light and color temperature of lights, all through your phone interface. Additionally, you can set up timers for your appliances and create customized usage scenarios to enjoy the convenience of a smart home system.

SK512-W-N is a kind of socket the power of which can be controlled by the Internet with its connection
to the Internet through WiFi.
Where there is Internet, users can achieve the on/off control of the power and the status display of the
socket through the smart phone APP. Meanwhile, customers are also able to control the R F wireless socket
and the light.SK512-W-N uses smartconfig to configure the Internet ,which is simple and convenient and
can support timer function settings .The user is able to set up the socekt according to his light ,and the
electric cooker locally or remotely.At the same time ,the user can also set up kind of contextual models and
enjoy the convenient life brought about by the Wifi smart system.
SK512-W-N is an Internet hardware device specially designed for smart phone control of family
appliances.With mobile phone software,the related appliance swithers and the light and color temperature
of lights can be controlled through the phone interface. Below we introduce how to install the smart app
and use the SK512-W-N
FCC STATEMENT :
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
User Manual
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator& your body.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator& your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Le rayonnement de la classe b repecte ISED fixaient un environnement non
contrôlés.Installation et mise en œuvre de ce matériel devrait avec échangeur distance
minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette antenne
ou capteurs avec d’autres.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

IPOTEK SK512-W-N User manual

Type
User manual

IPOTEK SK512-W-N is an Internet hardware device specially designed for smart phone control of family appliances. With mobile phone software, you can remotely control the on/off status of power sockets and lights, as well as adjust the light and color temperature of lights, all through your phone interface. Additionally, you can set up timers for your appliances and create customized usage scenarios to enjoy the convenience of a smart home system.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages