The maiwe MIEN2206-2F is a 100M unmanaged Ethernet switch with 2 fiber ports and 4 copper ports, designed for industrial applications. It supports automatic MDI/MDI-X connection, allowing you to connect the switch to terminal devices, servers, hubs, or other switches without worrying about cable types. The 100M fiber ports support single-mode or multi-mode fiber connectors, providing flexible connectivity options for long-distance data transmission.
The maiwe MIEN2206-2F is a 100M unmanaged Ethernet switch with 2 fiber ports and 4 copper ports, designed for industrial applications. It supports automatic MDI/MDI-X connection, allowing you to connect the switch to terminal devices, servers, hubs, or other switches without worrying about cable types. The 100M fiber ports support single-mode or multi-mode fiber connectors, providing flexible connectivity options for long-distance data transmission.
Indicator light Statues Definition
PWR1/2 On Power is connected and operating normally
Off The power is unconnected or the system is abornal
3Interface and Dimension Introduction
Industrial Ethernet Switch
User Manual
Version：V2.0
MIEN2206-2F
MIEN2208
1Packing list
The package of this switch contains the following items. If any item is found to be
missing or damaged, please contact the agent or the customer service center of Maiwe
for assistant.
2Product Description
Industrial Ethernet Switch
User Manual
Product certificate
1PCS
Items Quantity Remarks
1PCS
1PCS
Indicator Light Description
System status LED
RUN Blinking System operates normal
Off System operates abnormal
Fiber port status LED
LINK
On The port has established a valid network connection
Blinking The port has network activity
Off No valid network connection on the ports
Ethenret RJ45 port statues LED
Each Ethernet RJ45 port has two indicator lights,The yellow light is the
port rate indicator, and the green is the port connection status indicator.
10/100M
（Yellow）
On 100M work status（100Base-TX）
Off 10M work status（10Base-T）
LINK/ACT
（Green）
On Power is connected and operating normally
Blinking
The port has network activity
Off
No valid network connection on the ports
Unit:mm
100
140
Power cord 1PCS
This switch is a 100M unmanaged din-raill industrial Ethernet switch. MIEN2206-2F
provides 6x100M Ethernet interfaces (2x100M fiber ports and 4x100M copper ports);
MIEN2208 provides 8 x100M Ethernet ports.
4Hardware Installation
Installation Precautions
To prevent equipment damage or personal injury caused by improper use, ob-
serve the following precautions:
During the installation process, you need to wear anti-static gloves or
anti-static gloves, and power-off the switch.
Please make sure that the input voltage is within the input voltage range
marked on the switch.
The transmission distance has a certain relationship with the connected
wire. It is recommended to use a standard Cat5e/6 network cable.
The equipment must be grounded for lightning protection, otherwise the
protection level of the equipment will be greatly reduced; please use a
wire of No. 20 or more to connect the grounding terminal to the ground.
The power line, ground line and signal line are laid out separately and the
distance is not less than 5cm.
Crimp one end of the grounding screw with the cold-pressed
terminal.The other end of the grounding wire is connected to the
ground, and the grounding wire is not less than 2.5mm2
Items Description
Ground screw
Power
interface
Ethernet
RJ45 port
Support DualDC9-60V.DC36-72V.
Single power input AC85-264V or DC110-370V.
Supports automatic MDI/MDI-X connection. You can connect the
switch to terminal devices, servers, hubs, or other switches.
DIN-Rail kit To fix the switches
Fiber port
The 100M fiber port is a 100Base-FX full-duplex single-mode or
multi-mode fiber connector,which support single-fiber or dual-fiber
connectors, and the connector can be SC, ST or FC. The optical fiber
connectors must be used in pairs (TX and RX are a pair).
1.Tilt the switch upwards so that the upper end of the buckle is fastened
to the upper end of the DIN rail.
2.The lower end of the back buckle is buckled into the DIN rail.
Ground
screw
Ethernet
RJ45 port
Fiber port Ethernet
RJ45port
MIEN2206-2F MIEN2208
DIN-Rail Power
35 35
AD220 model only
Installation
MIEN2206-2F
Exchange properties
Specification
Device Connection
Optical fibers and network cables
Connect the optical fiber and network cable to the port in the correct
direction.
Power Input
Before connecting the power cord, make sure that the ground is
connected, and then connect the power cord to the power terminal of the
device according to the definition.
6 Ordering Guide
Models 100M fiber Input power
MIEN2206-2F
7Commitment to Customers
The company solemnly promises: in the normal use of a month to return,
one year free maintenance, five years warranty, lifelong maintenance. The
details are as follows:
If Maiwe products have quality problems and cannot work normally, they will be re-
funded, one-year free maintenance, five-year warranty, and end-of-life maintenance.
Two years warranty for optical fiber, cable, jumper, flange, cable terminal box and
other optical passive products, but no return service.
One year warranty for accessories and power supply comes with the product.
Wuhan Maiwe Communication Co., Ltd.
Add: Building E2, No. 2 building, Area E Fenghuang Industrial park, No. 52 Liufang Avenue, East lake
Hightech
Development Zone, Wuhan, China.
Tel: 027-87170215/16 Site: www.maiwe.com
Fax: 027-87170217 Post Code: 430205
Statement:
Due to the continuous updating and improvement of products and technologies, the contents of this
manual will be updated from time to time. All the information in the manual is only used for instructions,
if the content in the text does not completely match the actual product, please understand and please
contact our customer service in time.
MIEN2208
100M copper
MIEN2208
24
8
0
Interface
100M fiber
port
2x100Base-FX
100M
copper
port
4x
10Base-T/100Base-
TX RJ45 ports
8x
10Base-T/100Base-
TX RJ45 ports
——
The power supply parameters
768Kbit
bandwidth 1.6G
Cache size
MACtable size 2K
SC/FC/ST connectors are available
Full-duplex/half-duplex adaptive, supports MDI/MDI-X adaptive
Power consumption
AC power input AC85~264V (frequency: 47~63Hz) or DC110~370V
DC power
input
DC9-60V,DC48V（36-72V）
Supports dual power supply redundancy and reverse connection
protection
2.6W@24V（Max） 1.8W@24V（Max）
Working environment
Working temperature
Storage temperature
Humidity 5%~95%（No condensation)）
-40℃~+85℃
-40℃~+85℃
Mechanical parameters
size 140mm×35mm×100mm) Installation
35mm Standard DIN rail installation
Heat dissipation Aluminum alloy single-rib chassis surface scattered
IP protection IP40
Weight About 0.54kg
EMC
Industry Standard
IEC61000-4-2(ESD),Level4
IEC61000-4-5(Surge),Level4 ※Ethernet ports support 6KV lightning
protectionIEC61000-4-4(EFT),Level4
IEC61000-4-3(RS),Level4
IEC61000-4-6(CS),Level4
DC9~60V
DC48V(36~72V)
AC85〜264V（Frequency：47~63Hz）
or DC110〜370V
MAIWE All rights reserved 2021
The right to interpret the information published in this material belongs to Wuhan Maiwe Communication
Co., Ltd. and shall not be used or changed without formal authorization.
Catagory5 direction connect cable Catagory5 crossover connection
-
1
-
2
The maiwe MIEN2206-2F is a 100M unmanaged Ethernet switch with 2 fiber ports and 4 copper ports, designed for industrial applications. It supports automatic MDI/MDI-X connection, allowing you to connect the switch to terminal devices, servers, hubs, or other switches without worrying about cable types. The 100M fiber ports support single-mode or multi-mode fiber connectors, providing flexible connectivity options for long-distance data transmission.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
maiwe MIEN1203-F User manual
-
maiwe MIEN2208 Series User manual
-
maiwe MIEN2208 User manual
-
maiwe MIEN2216 User manual
-
maiwe MIGE2210G-2GF-8GT User manual
-
maiwe Industrial Ethernet Switch User manual
-
maiwe MIGE1203G, MIGE1205G Series Industrial Ethernet Switch User manual
-
maiwe IWAP3102 User manual
-
maiwe MISCOM8028GX-4XGF-16GF-8GC User manual
Other documents
-
Intellisystem IT-ES7110-IM-2GS-2F Owner's manual
-
-
Ruijie Networks RG-S2910-24GT4XS-E Hardware Installation And Reference Manual
-
-
-
-
ANTAIRA IMC-C1000 Series User manual
-
3onedata IES618-2F-4DI(RS-485)-P User manual
-
ANTAIRA IMC-100A Series User manual
-
Digitus DN-651150 Quick start guide
