Chipolino Kid's toy tricycle Max Sport Operating instructions

Brand: Chipolino

Model: Kid's toy tricycle Max Sport

Type: Operating instructions

This product is produced in accordance with

requirements of Toy safety Directive 2009/48/EC of the European

Parliament and the Council, Regulation regarding Essential Requirements

and Conformity Assessment of Toys, Regulation regarding Conformity

Marking and the standards applicable for this toy.

PLEASE READ CAREFULLY THIS INSTRUCTION MANUAL

AND KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE!

INSTRUCTION MANUAL FOR

KIDS’ TOY TRICYCLE

„MAX SPORT”

FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECCOMENDATIONS IN

THIS MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT!

 CAUTION! USE ONLY UNDER DIRECT ADULT SUPERVISION!

 CAUTION! THIS TOY HAS NO BRAKES!

 CAUTION! THE TOY IS NOT SUITBALE FOR CHILDREN UNDER 1,5 YEARS!

 CAUTION! USE FOR CHILDREN OLDER THAN 1,5 YEARS AND WEIGHT UP TO 25kg.

 CAUTION! DO NOT USE FOR CHILDREN OVER 25KG – DANGER OF OVERLOADING

THE TOY!

 CAUTION! BEFORE USING THE TRICYCLE, TEACH THE CHILD THE CORRECT WAY TO USE

IT AND THE SAFETY RULES.

 CAUTION! USE THE TOY ONLY FOR ITS PURPOSE.

 CAUTION! USE THE TOY ONLY DURING THE DAY ON EVEN PLAYGROUNDS AND AT A SAFE

DISTANCE FROM STREETS OR ROAD LANES FOR VEHICLES.

 CAUTION! TO AVOID THE DANGER OF INJURY ALWAYS REMOVE THE PUSH HANDLE

WHENEVER THE CHILD IS RIDING THE TOY ON HIS OWN!

 CAUTION! KEEP AWAY FROM FIRE OR OTHER HEAT SOURCES!

 Adult assembly required!

 DO NOT allow presence of children under 3 years before assembly of the TOY is complete.

In this way, you will avoid their access to small or loose parts!

 The TOY is intended for one child at a time ONLY!

 DO NOT let other children push the tricycle!

 The TOY is NOT suitable for running or skating!

 DiscontinueusingtheTOYifyoundmissingordamagedparts.

 DO NOT let the child stand on the footrest or the seat to avoid injury.

 The child must wear shoes when using the TOY!

 DO NOTtiestringsoraccessoriestotheTOYinordertoavoidtheriskofsuocation.

 DO NOT place more than 0,2 kg load in the front storage basket and no more than 0,5 kg load

in the rear basket.

 DO NOT put items or luggage in the handle bar or the parent handle in order to avoid risk of injury

resulting from the toy’s instability and tipping over!

 DO NOT place items or heavy objects in the TOY or on it during storage or transportation to avoid

damage to the frame.

 DO NOT use another transport means to move the TOY by pulling it.

 DO NOT allow the child using the TOY or other children around it to touch the wheels or put items

in them.

 Use away from rivers, pools, stairs or hurdles!

 Do not make changes or modications to the TOY frame! If necessary, contact the retailer or

an authorized service center for advice and repair.

 Use only spare parts, which are approved by the producer and recommended by the distributor or

 companyservice!Theproducerrevokesallresponsibilityincasepartsdierentfromtheoriginal

ones have been used.

 Keepnylonpackagesawayfromchildrentoavoidriskofsuocation!

CAUTION! WARNINGS!

A reminder that the toy should be used with caution since skill is required to

avoid falls or collisions causing injury to the user or third parties.



PRODUCT FEATURES

MAIN PARTS

This is a functional TOY whose purpose is to create in the child initial skills to coordinate its arms

and feet when riding a tricycle or bicycle.

IMPORTANT! Remove the parent handle when you are sure that the child can ride the tricycle on

his own and unaided.

 Suitable for children older than 1,5 years with weight up to 25 kg;

 Can be driven by the child using the pedals;

 Seat rotates at 360° degrees;

 Can be pushed by an adult and the child lays his feet on the foot rest;

 Safety bumper;

 Movable foot rest;

 Adjustable canopy;

 Front and rear storage baskets.

1Frame 9Fabric cover

2Fork 10 Front bumper

3Front wheel 11 Cup holder

4Rear wheels 12 Front basket

5Steering bar 13 Mud guard

6Parent push handle 14 Rear storage basket

7Canopy 15 Accessories – fasteners

8Seat 16 Steering rod

Please, make sure if these parts are in the package.

Some of the parts may be pre-installed by the manufacturer.

13121110 14

1 2 3 4

5 6 7 8 9

Necessary tools: wrench and screwdriver (not included).

ASSEMBLY INSTRUCTIONS

IMPORTANT! Follow exactly the instructions given and check the pictures. Keep your hands from

entrapment!

IMPORTANT! After each operation, make sure that you have followed the instructions correctly and

thexingisstable!

CAUTION!Makesureallxingsaretightbutnotovertightenthem.Ifsomepartsareloosethiscould

cause disintegration of the tricycle and injury to your child.

ASSEMBLY

1. ASSEMBLY OF FORK (WITH FRONT WHEEL AND MUD GUARD) TO THE TUBE ON FRAME

1-1–Placethemudguard(13)betweenbothtubesoffork,asshowninthegure.

1-2 – Fix the mud guard with a screw by using a screwdriver.

1-3 – Place the front wheel to the tubes of fork. Press the pins (a) and insert them inwards until they jump

outoftheopenings.Byxingyouwillhearaclicksound.

1-4–Placethecovers(fromaccessoriesset-15)onfronttubesofframeasshowninthegure.

1-5 – Thread the fork tube through the front tube of frame.

2. ASSEMBLY OF THE HANDLEBAR

2-1 – Remove from the steering bar assembled screw (b) and nut.

2-2 – Install the front basket and after that the steering bar to the fork, so that the openings at fork and

steering bar match. Fix with screw and nut (c).

2-3 – Press the buttons (d) simultaneously and set the steering bar forwards or backwards to adjust its

height.

3. ASSEMBLY OF REAR WHEELS

3-1 – Place the rear axis (e) to the rear wheel.

3-2 – Place the rear wheel to the frame and press until you hear a click sound. Make sure that wheel

isxedbytryingtopullitoutfromtheframe.Installtheotherrearwheelfollowingthesameorderof

actions.

3-3 – To remove the each of the rear wheels, press the button (f) and remove the wheel.

3-4 – Place the decorative cover (g) – part of accessories set 15 on each rear wheel with light pressure.

4. INSTALLING THE PUSH HANDLE

4-1–Placebothplasticwashersatbothsidesoftheframeasshowninthegure.

4-2 – Press pin (h) and thread the down part of the parent push handle.

4-3 – Press pin (h) and insert the upper part of handle into the down part of the handle until you hear a

click sound and pin jumps out of the opening.

4-4 – To remove the handle, move the red lever down and press the pin and then remove both parts of

the parent handle.

5. INSTALLING THE SEAT

5-1 – Always before seat assembly, set the red lever at parent handle upright.

5-2 – Remove the nuts from the screws under the seat.

5-3–Placetheseatontheframe(screwsmustgothroughtheslots)andxitwiththenut.

6. PLACING THE FABRIC PART

6-1 – Place the fabric part on the seat.

6-2 – Thread the shoulder belt through the seat and cover’s openings.

6-3–Twisttheendsofshoulderbeltsasshownintheguretoxthebeltstotheseat.

6-4 – After the bumper guard assembly (see clause 7 - ASSEMBLY OF FRONT BUMPER), place the

crotch fabric over the bumper and fasten with snap buttons.

7. ASSEMBLY OF FRONT BUMPER

Inserteachofthebumperarmsinthesideopeningsontheseatasshowninthegure.Pressuntilyou

hearaclickandtheyarexed.Toremovethebumper,pressthebuttons(K) at both sides and pull out

the bumper.

8. ASSEMBLY OF CANOPY

Insert the two ends of the canopy in the corresponding grooves on both sides of the seat as shown in

thegure.

9. INSTALLING THE GUIDING AXLE

9-1 – Place the cover (m) at the plate of the fork.

9-2 – Insert the bent end of the guiding axle in the corresponding opening in the plate of the fork

(with installed cover).

9-3 – Unfold the foot rest. Place the other end of the guiding axle in the plate in the lower part of the push

handleandxitwithanut–youwillneedawrenchtodothis.

10. INSTALLING THE REAR STORAGE BASKET

10-1 – Remove the screw and plastic head (n) from rear basket.

10-2 – Place the rear basket to rear part of the fame by aligning the openings of basket and frame and

xwithethscrewwithplastichead.

11. INSTALLING THE CUP HOLDER

Cup holder can be installed at both sides of parent handle. Place the cup holder on required side at

parenthandleandslidedownwardstoxit.

12. UNFOLD AND FOLD THE CANOPY

Pull the canopy with your hand to unfold it and push it back to fold it.

13. ROTATING THE SEAT AT 360°

Press the red button under the seat and rotate the seat in the desired position.

Afterrotation,theseatmaybexedintwodirections–FORWARD(facingtothefront)andREARWARD

(facingtotheback).Whenthepositionisxed,youwillhearaclicksound.

14. FOLDING THE FOOT REST

Fold the two steps on the footrest with your hand. Press the button (1) and shift the foot rest up. When

thefootrestisxedyouwillhearaclick.

To open the foot rest, press the button (1) and shift the foot rest down.

CAUTION! When the parent pushes the tricycle, use the foot rest in open position. When the child rides

the tricycle, fold the foot rests.

FUNCTIONS

1-1 1-2

1-3 1-4 1-5

2-1 2-2 2-3

3-1 3-2 3-3 3-4

15. ADJUSTING THE PUSH HANDLE HEIGHT

The push handle can be adjusted in 2 heights.

15-1–Pressthepin(2)andmovethehandleupordowntothedesiredposition.Byxingthepin(2)

must fall into the opening and you must hear a click sound.

15-2–Toxadditionallytheparenthandle,movetheredleverupwards.

16. ADJUSTING THE STEERING BAR

Press simultaneously the buttons (d) and set the steering bar forwards or backwards to adjust its

position.

17. GUIDING THE TRICYCLE BY THE PUSH HANDLE

18. DRIVING THE TRICYCLE BY THE CHILD

(AFTER REMOVING THE PUSH HANDLE AND CANOPY)

WARNING! The push handle may be removed after you are sure that the child can drive the tricycle on

his own.

“click“

4-1

5-1

6-1

7 8

9-1 9-2 9-3

6-2 6-3 6-4

5-2 5-3

4-2 4-3 4-4

10-1

15-1 15-2

10-2

folding unfolding

16 17 18

(2)

(1) (1)

“click”

13 14

MAINTENANCE GUIDELINES

 Periodically check the good working order of the tricycle parts.

 Do not wash it and do not soak it in water. Use a soft damp cloth and water or neutral liquid

detergent.

 Do not use aggressive detergents, containing abrasive particles, ammonia, bleach or spirits.

 Regularly oil the moving parts.

 Do not use on sand.

 Do not store the tricycle in hot environment, in order to avoid the plastic parts from deforming.

 Store the product in clean and dry place indoors. Do not expose to direct sunlight, moisture or harsh

weather!

 Always let the tricycle to dry out fully before storing or using it, in order to avoid mold and rust.

 Contact your authorized dealer if consultation or repair is needed.

Materials used:plastic,metal,textileandtextilelling–100%polyester.

TRKMS024xххх/ X1

CHIPOLINO LTD., 1 Goliamokonarsko Shosse Str, Plovdiv, BULGARIA

www.chipolino.com

Chipolino Kid's toy tricycle Max Sport Operating instructions

Chipolino Kid's toy tricycle Max Sport Operating instructions

Chipolino Kid's toy tricycle Max Sport Operating instructions

Related papers

Other documents