Contec CPS-COM-2PC Reference guide

Category
Software
Type
Reference guide
Reference Manual
(Software)
CONTENTS
M2M Controller Series
Configurable type
Firmware version 3.0.0 or later
Introduction .................................................................. 8
Safety Precautions .................................................... 14
Set the Computer Network ................................... 18
CONPROSYS WEB Setting ..................................... 24
Easy Data Process And Control ........................ 144
Monitoring Edit ...................................................... 196
Tag Edit ...................................................................... 210
Transferring Measured Data To Server .......... 218
Using the product as OPC UA Sever .............. 227
Set the Auto Send Mail ....................................... 242
Connecting to Azure IoT Hub ........................... 247
MTConnect ............................................................... 263
FTP communication .............................................. 267
MQTT Publish and Subscribe ............................ 272
Set Up Troubleshooting ...................................... 325
Appendix ................................................................... 329
Customer Support and Inquiry ......................... 385
Index ........................................................................... 387
2
Table of Contents
Introduction ....................................................................... 8
1. Manual Composition ............................................................................................................................................. 9
2. Procedure Until Ready To Use ........................................................................................................................ 10
3. Related Manuals ................................................................................................................................................... 11
4. Online Help ............................................................................................................................................................ 12
5. Check The Firmware Version ........................................................................................................................... 13
Safety Precautions ........................................................... 14
1. Safety Information............................................................................................................................................... 15
2. Handling Precautions ......................................................................................................................................... 16
3. Security Warning .................................................................................................................................................. 17
1. Information Security Risks ......................................................................................................................... 17
2. Security Measures e.g. ............................................................................................................................. 17
Set the Computer Network ............................................ 18
1. Connect with a PC ............................................................................................................................................... 19
2. Set the Computer Network.............................................................................................................................. 20
1. Computer Network Setting Procedure (for Windows 10)............................................................. 20
3. Check Communication ...................................................................................................................................... 23
CONPROSYS WEB Setting ............................................... 24
1. CONPROSYS WEB Setting Outline ................................................................................................................ 25
1. Compatible Web Browser .......................................................................................................................... 25
2. Start Up CONPROSYS WEB Setting ........................................................................................................ 25
3. CONPROSYS WEB Setting Basic Operation ........................................................................................ 26
2. Menu Function List ............................................................................................................................................. 28
3. Function Details.................................................................................................................................................... 30
1. Wired LAN........................................................................................................................................................ 30
2. Wireless LAN ................................................................................................................................................... 32
3. 3G ........................................................................................................................................................................ 35
4. LTE ....................................................................................................................................................................... 38
5. Proxy .................................................................................................................................................................. 41
6. Router Function ............................................................................................................................................. 42
7. IP Filter............................................................................................................................................................... 49
8. Modules ............................................................................................................................................................ 51
9. Data Transfer ................................................................................................................................................... 65
10. Azure IoT Hub................................................................................................................................................. 71
11. Time .................................................................................................................................................................... 72
12. Service ............................................................................................................................................................... 74
13. Mail ..................................................................................................................................................................... 77
14. SMS ..................................................................................................................................................................... 80
15. OPC UA.............................................................................................................................................................. 82
3
Table of Contents
16. MTConnect ...................................................................................................................................................... 84
17. FTP ...................................................................................................................................................................... 85
18. MQTT Connection ......................................................................................................................................... 88
19. MQTT Publish ................................................................................................................................................. 93
20. MQTT Subscribe .......................................................................................................................................... 100
21. FacilityView Connection............................................................................................................................ 105
22. FacilityView Transfer ................................................................................................................................... 106
23. System ............................................................................................................................................................. 109
24. Modbus Data View ..................................................................................................................................... 111
25. File View .......................................................................................................................................................... 127
26. Log .................................................................................................................................................................... 129
27. Firmware Update ......................................................................................................................................... 130
28. Configuration File ....................................................................................................................................... 131
29. User/Password .............................................................................................................................................. 132
30. Network .......................................................................................................................................................... 135
31. User's Restrictions ....................................................................................................................................... 136
32. Monitoring Edit ............................................................................................................................................ 137
33. Monitoring View .......................................................................................................................................... 138
34. Task Ed it .......................................................................................................................................................... 139
35. Tag Edit ............................................................................................................................................................ 140
36. Save and Reboot ......................................................................................................................................... 141
37. Save and Shut down .................................................................................................................................. 141
38. Save .................................................................................................................................................................. 141
39. Reboot ............................................................................................................................................................. 142
40. Shut down ...................................................................................................................................................... 142
41. Forced Reboot .............................................................................................................................................. 142
42. Repair SD and Reboot ............................................................................................................................... 143
Easy Data Process And Control .................................... 144
1. CONPROSYS VTC Outline ............................................................................................................................... 145
1. What You Can Do With CONPROSYS VTC ........................................................................................ 145
2. Work Area ...................................................................................................................................................... 146
3. Create Processing Tasks ............................................................................................................................ 146
4. Basic Procedure for Creating Processing Tasks ............................................................................... 147
5. Internal Variables ......................................................................................................................................... 150
2. Summary of Available Controls.................................................................................................................... 151
3. Input / Output Module Allocation .............................................................................................................. 156
4. Sample ................................................................................................................................................................... 159
1. Sample (1) ...................................................................................................................................................... 160
2. Sample (2) ...................................................................................................................................................... 162
3. Sample (3) ...................................................................................................................................................... 165
4. Sample (4) ...................................................................................................................................................... 168
5. Sample (5) ...................................................................................................................................................... 170
6. Sample (6) ...................................................................................................................................................... 172
7. Sample (7) ...................................................................................................................................................... 176
8. Sample (8) ...................................................................................................................................................... 181
9. Sample (9) ...................................................................................................................................................... 185
10. Sample (10) ................................................................................................................................................ 188
11. Sample (11) ................................................................................................................................................ 190
4
Table of Contents
Monitoring Edit .............................................................. 196
1. CONPROSYS HMI Outline .............................................................................................................................. 197
1. What You Can Do With CONPROSYS HMI ........................................................................................ 197
2. HMI Editor Work Areas ............................................................................................................................. 198
3. Create a Monitoring Screen .................................................................................................................... 198
4. Basic Procedure For Creating a Monitoring Screen ...................................................................... 199
2. Summary Of Available Controls ................................................................................................................... 203
3. Internal Variables Specification .................................................................................................................... 205
4. Sample ................................................................................................................................................................... 207
1. Sample of Input / Output Monitoring Screen. ................................................................................ 207
Tag Edit ........................................................................... 210
1. Overview Of Tag Edit ........................................................................................................................................ 211
1. Tag Edit Page................................................................................................................................................. 211
2. TAG Export/Import ...................................................................................................................................... 215
Transferring Measured Data To Server ....................... 218
1. Data Transfer Outline ....................................................................................................................................... 219
2. Settings for Transferring Measured Data ................................................................................................. 220
3. Data Transfer Setting ........................................................................................................................................ 221
1. Data Transfer ................................................................................................................................................. 221
2. Service ............................................................................................................................................................. 221
3. Network Setting........................................................................................................................................... 222
4. Wireless LAN ................................................................................................................................................. 223
5. 3G ...................................................................................................................................................................... 225
6. LTE ..................................................................................................................................................................... 226
Using the product as OPC UA Sever ............................ 227
1. OPC UA Client Preparation and Communication ................................................................................. 228
1. OPC UA Client Preparation...................................................................................................................... 228
2. Communication With OPC UA Client .................................................................................................. 228
2. Download OPC UA Sever Certificate .......................................................................................................... 230
3. Upload OPC UA Client Certificate ............................................................................................................... 232
4. Client Authentication By User ID ................................................................................................................. 234
5. Communication With CNC by FANUC....................................................................................................... 235
6. OPC UA Server Specification ......................................................................................................................... 236
1. Overall Specification .................................................................................................................................. 236
2. Address Space Specification ................................................................................................................... 237
3. OPC UA Tree Structure (with slave) ...................................................................................................... 241
Set the Auto Send Mail ................................................. 242
1. SMTP Sever Setting........................................................................................................................................... 243
5
Table of Contents
2. Mail Address Setting ........................................................................................................................................ 245
3. Send Mail Program ........................................................................................................................................... 246
Connecting to Azure IoT Hub ...................................... 247
1. Azure IoT Hub Communication Functions .............................................................................................. 248
1. Azure IoT Hub Communication Specification.................................................................................. 248
2. Azure IoT Hub Preparation ............................................................................................................................ 249
1. Create a Microsoft Azure Account ....................................................................................................... 249
2. Create an Azure IoT Hub .......................................................................................................................... 249
3. Obtain a Device Connection String...................................................................................................... 251
3. Azure IoT Hub Setting ..................................................................................................................................... 254
4. S e n d Azur e I o T Tas k .......................................................................................................................................... 255
1. Sending Format ........................................................................................................................................... 255
2. Set a Task ........................................................................................................................................................ 257
3. Check Sending ............................................................................................................................................. 260
4. Check Log....................................................................................................................................................... 261
5. Check Resending File ................................................................................................................................. 261
6. Receiving Format......................................................................................................................................... 261
7. Check Receiving ........................................................................................................................................... 262
MTConnect ..................................................................... 263
1. MTConnect Outline ........................................................................................................................................... 264
1. MTConnect Overall Specification .......................................................................................................... 264
2. MTConnect DataItem Specification ..................................................................................................... 265
3. An example of MTConnect client display .......................................................................................... 266
FTP communication ....................................................... 267
1. FTP communication function ........................................................................................................................ 268
2. FTP Server Settings ........................................................................................................................................... 269
3. File Sending/Receiving Program ................................................................................................................. 270
MQTT Publish and Subscribe ....................................... 272
1. MQTT Outline ...................................................................................................................................................... 273
2. Required Settings for MQTT Publish and Subscribe ............................................................................ 274
3. MQTT Connection ............................................................................................................................................. 275
4. Examples for MQTT Publish and Subscribe............................................................................................. 277
1. Publish (1) ...................................................................................................................................................... 278
2. Publish (2) ...................................................................................................................................................... 280
3. Publish (3) ...................................................................................................................................................... 282
4. Publish (4) ...................................................................................................................................................... 284
5. Publish (5) ...................................................................................................................................................... 287
6. Publish (6) ...................................................................................................................................................... 288
7. Publish (7) ...................................................................................................................................................... 289
6
Table of Contents
8. Publish (8) ...................................................................................................................................................... 291
9. Subscribe (1) ................................................................................................................................................. 292
10. Subscribe (2) ................................................................................................................................................. 294
11. Subscribe (3) ................................................................................................................................................. 296
12. Subscribe (4) ................................................................................................................................................. 297
13. Subscribe (5) ................................................................................................................................................. 298
14. Subscribe (6) ................................................................................................................................................. 300
5. Examples for MQTT Application .................................................................................................................. 301
1. Connection (1) .............................................................................................................................................. 302
2. Connection (2) .............................................................................................................................................. 303
3. Other (1).......................................................................................................................................................... 305
Router Function ............................................................. 306
1. Router Function Outline .................................................................................................................................. 307
2. Router Function Setting .................................................................................................................................. 308
1. DHCP Server .................................................................................................................................................. 309
2. Static Routing ............................................................................................................................................... 310
3. Port Forwarding ........................................................................................................................................... 312
4. IP Filter............................................................................................................................................................. 314
Connecting to FacilityView ........................................... 317
1. FacilityView ........................................................................................................................................................... 318
2. Preparation for FacilityView Connection .................................................................................................. 319
3. FacilityView Setting ........................................................................................................................................... 320
1. Service ............................................................................................................................................................. 320
2. CONPROSYS Registration ........................................................................................................................ 321
3. Activation ....................................................................................................................................................... 322
4. Check FacilityView communication logs .................................................................................................. 324
Set Up Troubleshooting ................................................ 325
1. If You Encounter a Problem? ......................................................................................................................... 326
1. General ............................................................................................................................................................ 326
2. Data Transfer To The Server Problems ................................................................................................ 328
3. Monitoring Screen Creation And Display Problems ..................................................................... 328
4. Processing Task Creation And Display Problems............................................................................ 328
Appendix ........................................................................ 329
1. Data Transfer Format ........................................................................................................................................ 330
2. F&eIT Protocol Specifications ....................................................................................................................... 343
1. Communications Sever Concept ........................................................................................................... 343
2. Basic Specifications .................................................................................................................................... 344
3. Control Information ................................................................................................................................... 350
3. SD Card .................................................................................................................................................................. 354
4. DIP Switch ............................................................................................................................................................. 355
7
Table of Contents
5. LED........................................................................................................................................................................... 356
6. Rotary Switch ....................................................................................................................................................... 357
7. Modbus Status Information........................................................................................................................... 358
8. COM Setting ........................................................................................................................................................ 365
9. MQTT Publish and Subscribe Data Format ............................................................................................. 366
1. MQTT Publish Data Format ..................................................................................................................... 366
2. MQTT Resend File Format ....................................................................................................................... 368
3. MQTT Subscribe Data Format ................................................................................................................ 369
10. MQTT Communication Log ........................................................................................................................... 371
1. COMMUNICATION LOG ........................................................................................................................... 371
2. PUBLISH LOG ................................................................................................................................................ 372
3. SUBSCRIBE LOG ........................................................................................................................................... 373
11. SMS Send log ...................................................................................................................................................... 374
12. Industrial Value Conversion ........................................................................................................................... 375
Setting Example 1 : Measurement Value .................................................................................................. 375
Setting Example 2 : Current Value............................................................................................................... 377
Setting Example 3 : Voltage Value .............................................................................................................. 379
Setting Example 4 : Connection With a Pyranometer of DC4-20mA Outputs .......................... 381
Setting Example 5 : Connection With a Thermometer of DC1-5V Outputs ............................... 383
Customer Support and Inquiry .................................... 385
1. Services .................................................................................................................................................................. 386
Index ................................................................................ 387
8
Introduction
This chapter provides necessary information of the product
such as the product configuration and manuals before
actual use.
Introduction
M2M Controller Series, Configurable type, Reference Manual (Software)
9
1. Manual Composition
This manual is composed as follows:
Introduction
M2M Controller Series, Configurable type, Reference Manual (Software)
10
2. Procedure Until Ready To Use
The followings show the standard procedure until the product is ready to use.
Connect with a PC
Refer to
page 19
Set up the network of PC
Refer to
page 20
Set up with CONPROSYS WEB Setting
Refer to
page 25
Set Username and Password
Refer to
page 132
Save the settings
Refer to
page 141
Set up the product
Refer to Reference
Manual
(Hardware)
*This procedure can be different depending on the user's environment or system types.
Introduction
M2M Controller Series, Configurable type, Reference Manual (Software)
11
3. Related Manuals
The manuals related to the product are listed below.
Read them as necessary along with this document.
Must Read The Following Manuals.
Name
Contents
How to Get
Product Guide
opening the package.
This lists the product
configuration and describes
the precautions.
Included in the package
(Printed matter)
Setup Manual
the product.
This describes the required
items for setup and
configuration procedure.
Download from
the Contec
website (PDF)
Reference Manual
(Hardware)
the product.
This describes the hardware
aspects such as functions and
settings.
Download from
the Contec
website (PDF)
Reference Manual
(Software)
the CONPROSYS WEB
This describes how to set each
function of CONPROSYS WEB
Setting”.
Download from
the Contec
website (PDF)
Read The Following Manuals As Necessary.
Name
When to Read
Contents
How to Get
CONPROSYS Cloud Data
Service 2(CDS2) Manual
Read this to understand
the outline of the
CONPROSYS Cloud
Data Service 2.
This describes the outline
and specification of the
CONPROSYS Cloud Data
Service 2 as well as how to
operate the product.
Download from
the Contec
website (PDF)
CONPROSYS Cloud Data
Service 2 Concise Manual
Read this when using
the CONPROSYS Cloud
Data Service 2.
This describes the procedure
to start monitoring
measured data in Cloud Data
Service 2.
Download from
the Contec
website (PDF)
Download Manuals
Download the manuals from the following URL.
Download
https://www.contec.com/download/
Introduction
M2M Controller Series, Configurable type, Reference Manual (Software)
12
4. Online Help
We offer the detailed information on CONPROSYS VTCfor assembling processing tasks such as
calculation and control as well as on CONPROSYS HMIfor operating and editing the monitoring
screen through the Online Help.
Consult the Online Help as necessary.
CONPROSYS VTC (Visual Task Control).
Online Help
https://doc.conprosys.com/help/task/V1/en/
CONPROSYS HMI (Human Machine Interface)
Online Help
https://doc.conprosys.com/help/hmi/V1/en/
Introduction
M2M Controller Series, Configurable type, Reference Manual (Software)
13
5. Check The Firmware Version
Before running the product, visit our website to check the firmware version and update to the latest
one if necessary.
Updating firmware to the latest version will resolve troubles and stabilize the operation.
Download
https://www.contec.com/download/
* Refer to the Firmware Update (page 130)for further details.
14
Safety Precautions
Understand the following definitions and precautions to
use the product safely. Never fail to read them before using
the product.
Safety Precautions
M2M Controller Series, Configurable type, Reference Manual (Software)
15
1. Safety Information
This document provides safety information using the following symbols to prevent accidents
resulting in injury or death and the destruction of equipment and resources.
Understand the meanings of these labels to operate the equipment safely.
DANGER
Signal word used to indicate an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING
Signal word used to indicate a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION
Signal word used to indicate a potentially hazardous situation which,
if not avoided, could result in minor or moderate injury.
Safety Precautions
M2M Controller Series, Configurable type, Reference Manual (Software)
16
2. Handling Precautions
CAUTION
The specifications of the product are subject to change without notice for enhancement and
quality improvement. Even when using the product continuously, be sure to read the manual
in the CONTEC’s website and understand the contents.
Do not modify the software.
CONTEC will bear no responsibility for any problems, etc., resulting from modifying the
software.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that
may appear in this document or for results obtained by the user as a result of using the
software.
Safety Precautions
M2M Controller Series, Configurable type, Reference Manual (Software)
17
3. Security Warning
When connecting to the network, be aware of security-related problems. See the examples of
Security measures below and set up the product properly along with the network devices.
1. Information Security Risks
Unauthorized access from the outside through a network could cause the system halt, data
damage, or exposure to malware. *1
Invaded and used as a stepping stone, a device might attack the others through networks. (a
victim becomes an assailant)
Information might leak without realizing due to the connection to the network.
Secondary damages such as harmful rumors, liability in damages, social credibility fall, and
opportunity loss are expected led by the troubles described above.
*1: Malware (Malicious Software) is software that brings harm to a computer system and performs
unintended operations.
2. Security Measures e.g.
Do not keep using the default password. (Refer to the product manual for the password
setting).
Set a strong password.
Combined with upper and lowercase letters, and numbers so that it cannot be easily
analogized by others.
Change the password periodically.
Disable unnecessary network services and functions.
Restrict access to the network with network devices. *2
Restrict ports to be released on the network with network devices. *2
Create a closed network connection using such as dedicated network or VPN*3
*2: Inquire for setting procedure to manufacturers.
*3: VPN (Virtual Private Network) a secured network that wards off unauthorized access by
protecting the communication path with authentication and encryption.
Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole
that are endlessly found day and night.
Please understand that risks are always involved with the Internet connection, and we strongly
recommend a user should constantly update information security measures.
18
Set the Computer
Network
This chapter describes how to connect the product with a
PC, set the network, and check the communication.
Set the Computer Network
M2M Controller Series, Configurable type, Reference Manual (Software)
19
1. Connect with a PC
To set the product, you need to first set up the network between the PC and the product in order to
establish communication.
First, connect the product with the PC.
1 Follow the instructions below to connect the computer, the controller, and the power unit.
* Refer to Reference Manual (Hardware)for how to create a power cable.
2 Connect the power unit with AC plug, then turn on the computer.
* After connecting the power unit with AC plug, it takes a few minutes for the controller to
complete the start-up. (approx. 1-2 min)
Set the Computer Network
M2M Controller Series, Configurable type, Reference Manual (Software)
20
2. Set the Computer Network
Follow the Computer Network Setting Proceduredescribed below and set the network to make the
IP addresses as shown.
The product must set a unique IP address for the bold part (200 or 101) that is not used by other
devices on your network.
* If proxy is set to your PC, do not use the proxy.
1. Computer Network Setting Procedure (for Windows 10)
1 Click the [Network & Internet] on [Windows Settings] screen.
2 Click the [Change adapter options] in [Network status].
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390

Contec CPS-COM-2PC Reference guide

Category
Software
Type
Reference guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI