2. Flaming River
  3. Column

Flaming River Column Product information

  • Hello! I've reviewed the Flaming River wiring diagrams for turn signal switches. This document covers wiring instructions, including left and right turn signals, hazard lights, and horn connections. It also contains information about replacement switches and wiring accessories. I'm ready to help answer your questions about these devices.
  • What is the purpose of the black wire on the turn signal switch?
    What does the purple wire provide?
    What function does the white wire provide?
Steering Column
Wiring Diagrams
Steering Column Wire Harness – Turn Signal Switch
The multicolored wire harness on your Flaming River Industries
steering column is for the turn signal switch pre-installed on the
column. This document will provide a wiring diagram and a brief
overview on how the turn signal switch functions.
Visit FlamingRiver.com for Tech Tips or call 1-800-648-8022 if
additional assistance is required, we are happy to help!
P/N: 102569, Rev A
1
Turn Signal Switch, Male Connector
Letter
Wire Color
Function
G
Black
Horn Relay
H
Light Blue
Left Front Turn Signal
J
Blue
Right Front Turn Signal
K
Brown
Hazard Power (+12V)
L
Purple
Turn Signal Power, Main (+12V)
M
Yellow
Left Rear Turn Signal
N
Green
Right Rear Turn Signal
P
White
Brake
Light Power (+12V)
Gray (separate)
Illuminated Gearshift
Indicator (+12V)
(Non
-Key, Shift Columns Only)
G H J K L M N P
P/N: 102569, Rev A
Inside the Turn Signal Switch
Black
(Horn Relay)
Light Blue
(Left Front TS)
+12V, Brown
w/ Flasher
(Hazard Power)
Blue
(Right Front TS)
Yellow
(Left Rear TS)
+12V, White
(Brake Light
Power)
Green
(Right Rear TS)
+12V, Purple w/ Flasher
(Turn Signal Power)
2 P/N: 102569, Rev A
Turn Signal Switch Orientations
3
Switch contacts in the UP position
Arm DOWN
Arm Neutral
No contact except brake lights
Arm UP
Switch contacts in the DOWN position
LEFT TURN
NO TURN
RIGHT TURN
P/N: 102569, Rev A
Left Turn Signal Wiring Diagram
Light Blue
(Left Front TS) Yellow
(Left Rear TS)
Green
(Right Rear TS)
4
Brown (Hazards)
Not Connected
+12V, White (Brake Lts)
Always Connected
(Controlled by Brake
Pedal)
+12V, Purple
(Turn Signal Power)
Turn signal power (Purple) connected to left side turn signals (Light Blue, Yellow).
While Purple is connected to the left turn signals, these will flash on and off if a
flasher is installed.
Brake light power (White) maintains contact with right rear turn signal (Green) in
case the brake pedal is pressed.
P/N: 102569, Rev A
No Turn Signal Wiring Diagram
5
Brown (Hazards)
Not Connected
+12V, White (Brake Lts)
Always Connected
(Controlled by Brake
Pedal)
+12V, Purple
(Turn Signal Power)
Green
(Right Rear TS)
Yellow
(Left Rear TS)
Purple (Turn Signal Power) is not connected.
Brake light power (White) maintains contact with the right (Green) and left
(Yellow) rear turn signals.
P/N: 102569, Rev A
Right Turn Signal Wiring Diagram
6
Brown (Hazards)
Not Connected
+12V, White (Brake
Lts) Always Connected
(Controlled by Brake
Pedal
+12V, Purple
(Turn Signal Power)
Blue
(Right Front TS)
Green
(Right Rear TS)
Yellow
(Left Rear TS)
Turn signal power (Purple) connected to right side turn signals (Light Blue, Yellow).
While Purple is connected to the right turn signals, these will flash on and off if a
flasher is installed.
Brake light power (White) maintains contact with left rear turn signal (Yellow) in
case the brake pedal is pressed.
P/N: 102569, Rev A
Hazard Light Wiring Diagram
7
When Hazard Power is toggled ON,
Turn Signal Power (Purple) is
disconnected.
Light Blue (LFTS)
+12V, Brown
(Hazard Power)
(Turn Signal Power) Purple
Blue (RFTS)
Green (RRTS)
Yellow (LRTS)
All turn signals are
connected to
Hazard Power
(Lights will flash
if flasher is
installed) Hazard Button
Pushed In
+12V, White (Brake
Lts) Always Connected
(Controlled by Brake
Pedal)
P/N: 102569, Rev A
Horn Contact
IMPORTANT: Spring-loaded horn contact connects to the underside of
the cancelling cam. When connecting the cancelling cam to your horn
button, please note the following:
8
The BLACK WIRE is ONLY designed to trigger a 12V HORN RELAY.
DO NOT connect the BLACK WIRE directly to the horn or permanent damage
to the vehicle’s wiring or other components may occur.
Grounding the BLACK WIRE will trigger the horn relay in the vehicle to
sound the horn. Contact with ground can be interrupted by the horn button.
See below for an appropriate horn relay wiring diagram.
87a
+12V
+12V 30
86 85
87
Horn Button
Ground
Horn Relay
Horn
Main Power
Relay Power
P/N: 102569, Rev A
Notes
If you need to record the pin-out or color scheme for the stock wire
harness in your vehicle you can do so here:
Function
Wire Color
Slot
Horn
Left Front Turn Signal
Right Front Turn Signal
Hazard Power
Turn Signal Power, Main
Left Rear Turn Signal
Right Rear Turn Signal
Brake
Light Power
Illuminated Gearshift
Indicator
9 P/N: 102569, Rev A
Replacement Turn Signal Switches
FR20025SC – Turn signal switch without indicator light
For floor shift and non-indicator column shift steering columns
TS-SWITCHGS – Turn signal switch with indicator light
For column shift with indicator light (non-keyed)
100841 – Turn signal switch for keyed columns (floor shift and column shift)
Wiring Accessories
FR20118 – Female Connector Kit 4-1/4”
Female plug for Flaming River tilt columns. Supplied with
terminals. Can be used to adapt any existing wiring harness to
mate with Flaming River 4-1/4” connector.
FR20118-1 – Hazard Kit (4-Way Flashers)
Flasher kit used for classic vehicles that don’t come equipped
with 4-way flashers. Includes flasher, 15 Amp in-line fuse,
female connector and terminals.
10 P/N: 102569, Rev A
FlamingRiver.com
800 Poertner Drive
Berea, OH 44017 USA
Telephone: 440-826-4488
Fax: 440-826-0780
TOLL FREE
Telephone: 1-800-648-8022
Fax: 1-800-243-5263
Office Hours: 8:30AM – 5:00PM EST, Monday – Friday
P/N: 102569, Rev A
/