System and features
> 8ch Amplier check for defects
> Failed amplier is automatically switched to spare amp.
> Check-in amplier automatically recognition and save
DFD-8218A >> Digital Fault Detector
> Input 8CH setup and mixing function
> Input 16CH and output 8CH matrix function
> 16CH input volume control function
> Relay based PC control.
DAP-8288A >> Digital Audio Processor
> Self checking function
> Auto record and playback function for line busy signal.
> Enough information storage by Hard Disk Driver.
> 22Khz, 44.1kHz selectable
> Serial RS-232 data communication
DRP-8244A >> Digital Record & PlayBack
> Arrange 32 line switch and all switch
> Built-in chime for notice broadcast
> Arrange switch for preventing transmission broadcast around of noise
> Arrange high sensitive condenser MIC for high articulation and convenience.
> EM, NORMAL circuit each 32 input
> Speaker output 2line type or 3line type.
> PANEL MONITOR INTERFACE for EM, NORMAL broadcasting Monitoring
and System Check
> LINE DETECTOR for speaker line
DRG-8232A >> Digital Relay Group
> All switch application and 32 circuit of line
> Post chime sound before broadcasting
> Noise free switching circuit technology in pre/post broadcasting
> High sensitive condenser Mic, for clear sound and Mic holder
DRM-8232A >> Digital Remote MIC
> Status [Macro] SET-UP & MONITORING about broadcasting zone by PC
> Improved efciency and saving line cost by using RS-232/RS-422 DATA
communication way
> EMERGENCY PANEL function -SYSTEM monitoring and maintenance function
> Sound source (CDP, DECK, TUNER) DIGI-LINK controlling for Scheduling
broadcasting
> Speaker Output monitoring by RELAY GROUP
DSC-8200A >> Main System Controller
> 32 circuit auto re sensor signal detect function
> EM/Normal broadcasting select function
> P/S individual key user program setup
> EM/Normal status individual switch different LED color display.
> Back up function after the EM signal to normal mode
DSS-8232A >> Digital Speaker Selector