Ringway OCDTG8862 User manual

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings,install in accordance with the manufacturer s instructions.

8) Do not install near any heat sources such as radiators, heat registers,stoves,or other apparatus (including am

plifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug.A polarized plug hase two blades

with one wider than the other.A grounding type plug has two blades and a third grounding prong.The wide blade

or the third prong are provided for your safety,if the provided plug does not fit into your outlet.consult an elec

trician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs.convenience receptacles,and

the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart,stand,tripod,bracket,or table specified by the manufacturer,or sold with the

apparatus.When a cart is used,use caution when moving the cart/apparatus combination to avoid injury from

tip-over (Figure 1).

13) Unplug this apparatus during lightning storms or when unused for a long periods fo time.

14) Refer all servicing to qualified service personnel.Servicing is required when the apparatus has been dam

aged in any way,such as power-supply cord or plug is damaged,liquid has been spilled or objects have fallen

into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally,or has been

dropped.

WARNING:To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture.

CAUTION:Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids,such as vases,shall be placed on the apparatus.

(Figure 1)

Thank you for purchasing this digital instrument.For perfect operation and security,please

read the manual carefully and keep it for future reference.

Precaution

Safety Precautions

Important Safety Instructions

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

The lightning flash with arrowhead symbol within an equilateral triangle is in

tended to alert the user to the presence of uninsulated dangerous voltage

within the product s enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance(servicing) instructions in

the literature accompanying the product.

Your digital piano is a high-quality digital piano with 88 standard

touch sensitivity keyboard and combines the most advanced PCM

tone generation technology. This digital piano lets you record your

performances and Registration settings to a USB Disk. Each user

song lets you record up to sixteen independent tracks. In order to

obtain maximum performance and enjoyment, please read this

manual thoroughly while trying out the various features described.

Thanks For Using Our Digital Piano

................................ 2

3

5

6

7

8

9

10

11

12

13

15

16

17

18

19

22

24

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

Panel Control

Connectors

Using DC Power Jack

Using Headphones

Using Foot Pedals

Using MIDI IN/OUT Jack

Using Line IN/OUT Jack

Using MIDI Thru/In/Out Jack

Using Line In/Out Jack

USB-MIDI/USB AUDIO

Basic Operation

Standby/On Switch

Adjust the Volume

Demo Play

Voices

Selecting a Voice

Dual Mode

Mixer

Playing Portable Grand Piano

Keymode

Transpose

Tune

Tempo/Tap

Metronome

Touch

One Touch Setting

User Edit

Effect

Function

Main Voice Pan

Split Voice Pan

Dual Voice Pan

Main Voice Octave

Split Voice Octave

Dual Voice Octave

Arpeggio

Midi In

Midi Out

Local

Reverb Type

Main voice Reverb Level

Split Voice Reverb Level

Dual Voice Reverb Level

Chorus Type

Main voice Chorus Level

Split voice Chorus Level

....................................

...................

.......................

............

.............

.......

................

.............

............................

..................................

.......................

..................................

............................................

.........................

..................................

..........................................

.......

......................................

.. ...................................

............................................

...................................

.......................

...........................................

.....................................

. ..........................................

........................................

......................

...........................

......................

.....................................

..........................................

................................

.............

...............................

44

45

46

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

64

66

68

69

70

73

74

77

79

80

81

82

Start the Style

Stop the Style

Fade

Adding Fill-In

Adjusting the Accompaniment

Volume

User rhythm recording

Registration Memory

Store

Load

Freeze Function

Saving the Registration Data

to USB Disk

Song Recording

Quick Recording

Multi Track Recording

Delete Song

USB File Button

USB Volume

Chord Dictionary

Selecting the Chord Root

Selecting the Chord Type

Exiting the Chord Dictionary

Teaching Function

Left/Right Hand

3 Steps of Learning Feature

Factory Set

Appendix

Voice List

Style List

Percussion Voice List

MIDI Implementation Chart

Specifications

Assemble Draft

Dual voice Chorus Level

Pedal1 Control

Pedal2 Control

Main voice Track

Split voice Track

Dual voice Track

USB Speed

Play Mood

Left/right Hand

Auto Power Off

Auto Accompaniment

Selecting a Style

...........................

...............

.............................

..........................

...........................

..........................

..................................

...........................

...................

..........................

..............................

............................................

..............................

........................................

....................

...........................................

...........................

..............................

..... ............ ................

..........................

..................

.................................

. .............

..............

..........................

........

........................

..........................

..........

....................................

.......................................

.....................................

...................

..............................

............................

..........

................................

..........................

Contents

USB TO DEVICE

DC 12V

1

2

1

2

3

4 5 6 7 8 9

10 11 12 13 14 15

16

17

18

19

20

21 22 23 24 25 26 27 28

29 30 31 32

34

33

35 36 37 38 39 40 41

42

ACC.

VOLUME

TRANS.

TUNE

BASS

TREBLE

TEMPO / TAP

FILL IN 1

STORE / BANK

MASTER

VOLUME

FADE

SYNCHRO

INTRO

METRONOME

DATA CONTROL

NUMBER

MIXER

KEYMODE

ENDING

START

STOP

FILL IN 2

VARIATION

VAR IAT IO N

O.T.S

FUNCTION

ENTER

TG8862

VOICE

VOICE PIANO

ORGAN

ORGAN GUITAR

BASS

USER VOICE

STYLE

8BEAT

8 BEAT

BALLAD

DANCE

DISCO

USER STYLE

M1

M2

M3

M4

M5

1 2 3 4 5

6 7 8 9 0

DUAL

GRAND PIANO

FREEZE

TOUCH

DEMO / LEARN

CHORD

DICTIONARY

USER EDIT

REVERB

CHORUS

USB FILE

RECORD

PLAY / LOAD

SAVE TO

MULTI

DELETE

STORE / BANK

DATA CONTROL

NUMBER

VOICE

VOICE PIANO

ORGAN

GUITAR

BASS

USER VOICE

STYLE

8 BEAT

8BEAT

BALLAD

DANCE

DISCO

USER STYLE

M1 M2 M3 M4 M5

1 2 3 4 5

6 7 8 9 0

DUAL

GRAND PIANO

FREEZE

TOUCH

DEMO / LEARN

CHORD

DICTIONARY

USER EDIT

REVERB

CHORUS

USB FILE

RECORD

PLAY / LOAD

SAVE TO

MULTI

DELETE

+

-

I

ACC.

VOLUME

TRANS.

TUNE

BASS

TREBLE

TEMPO / TAP

FILL IN 1

MASTER

VOLUME

FADE

SYNCHRO

INTRO

METRONOME

MIXER

KEYMODE

ENDING

START

STOP

FILL IN 2

VAR I ATIO N

O.T.S

FUNCTION

ENTER

+

-

I

LINE OUT

LR

LINE IN

MIDI IN

MIDI INMIDI OUT

MIDI THRU

PEDAL

USB TO HOST

DC 12V

LINE OUT

LR

LINE IN

MIDI IN

MIDI OUT

MIDI THRU

PEDAL

USB TO HOST

1

Panel Contents

2

Top Panel

1. STANDBY/ON

2. MASTER VOLUME

ACC.VOLUME

BASS/TREBLE

3. LCD DISPLAY

4. [FADE] Button

5. [TEMPO/TAP] Button

6. [METRONOME] Button

7. [TRANS./TUNE] Button

8. [MIXER] Button

9. [KEYMODE] Button

10. [SYNCHRO] Button

11. [INTRO/ENDING] Button

12. [START/STOP] Button

13. [FILL IN 1] Button

14. [FILL IN 2/VARIATION] Button

15. [O.T.S] Button

16. [FUNCTION] Button

17. [ENTER] Button

18. [+/ -] Button

19. [DATA CONTROL] Button

20. [VOICE/STYLE] Button

21. VOICE and STYLE SELECT/

Number 0~9 Button

22. [NUMBER ] Button

23. [DUAL ] Button

24. [GRAND PIANO] Button

25. [CHORD DICTIONARY] Button

26. [USER EDIT] Button

27. [REVERB] Button

28. [CHORUS] Knob

29. [STORE/BANK] Buttons

[M1~M5] Button

[FREEZE] Button

30. [TOUCH] Buttons

31. [DEMO/LEARN] Button

32. [USB FILE] Button

[RECORD] Button

[PLAY/LOAD] Button

[SAVE TO] Button

33.USB TO DEVICE

Rear

34

Panel

. PEDAL Jack

35. USB TO HOST Jack

36. MIDI THRU Jack

37. MIDI OUT Jack

38. MIDI IN Jack

39. LINE OUT Jack

40. LINE IN JACK

LINE OUT(R/L)

41. DC 12V Jack

42. PHONES Jack

Connectors

3

Using DC Power Jack

Using Headphones

Two sets of standard stereo headphones can be plugged in here for private

practice or late-night playing. The internal speaker system is automatically shut

off when a pair of headphones is plugged into PHONES jacks.

PHONES 2

PHONES 1

Plug the DC output cable from the provided power adapter into DC IN jack in the

bottom panel of your instrument, then plug the AC cable of your power adapter into

the AC power socket. Please confirm your country’s Mains voltage is compatible

with the supplied power adaptor. Most of the world’s electrical supply is 220v or

240v 50Hz - Some countries such as the USA are on 110v / 60Hz.

Using Foot Pedals

Connect the plug of the foot pedal unit to the pedal jack on the rear panel.

2. Sostenuto Pedal (Center)

If you play a note or chord on the keyboard and press the sostenuto pedal while

the notes are held, those notes will be sustained as long as the pedal is held, but

all subsequently played notes will not be sustained.

SOSTENUTO

It performs the same function as the damper pedal on an actual acoustic piano,

letting you sustain the sound of the voices even after releasing your fingers from

the keys.

SUSTAIN

1. Damper Pedal (Right)

3. Soft Pedal (Left)

The Soft Pedal controls the sound volume. Press the pedal to decrease the

output sound volume.

SOFT

4

Using MIDI THRU/IN/OUT Jack

The Midi In connector receives the Midi data from an external Midi device.

The Midi Out connector transmits Midi data generated by the instrument to

other Midi instruments.

The Midi THRU connector retransmits any data from the Midi In directly to

other Midi devices.

Using Line IN/OUT Jack

The audio output from other sound system connected to the LINE IN jack on

the bottom panel can be mixed with the sound of the unit. This function is

convenient when you want to play along with a favourite song.

The Line out jack can be used to deliver the output of the piano to a keyboard

amplifier, stereo sound system, mixing console or tape recorder.

MIDI IN

MIDI OUT

MIDI THRU

5

USB-MIDI/USB AUDIO

This product allows the transfer of MIDI over USB.

There is a specific way in which the MIDI signals are

routed for maximum flexibility. In a standard Digital

Piano, the built-in keyboard sends MIDI signals to the

internal sound bank as well as the 5-pin MIDI output.

In this digital piano, the keyboard not noly sends MIDI

to the internal sound bank (just like normal) but also

sends MIDI simultaneously to the internal MIDI

connection which hooks up inside the device to the

Audio Interface.

It is the Audio Interface that controls the USB-MIDI.

USB AUDIO interface is a digital audio interface. By USB cable, you can digitally

transfer intact audio signals of PC to

when you play this instrument; likewise, you can transfer

intact audio signals of the instrument to PC to record and edit music.

this instrument, and enjoy it on this instrument

or use it for accompany

USB

TO HOST

USB

TO HOST

LINE OUT

LR

6

Basic Operation

STANDBY/ON Switch

Adjust the Volume

Turn the power on by pressing the [STANDBY/ON] switch, the panel LCD display

will light.

Use [MASTER VOLUME] control to adjust the volume to your desired level.

7

2.Deactivate the AUTO STANDBY function

This product will switch off automatically in 30 minutes after no any operation

on it. In this case, press the [standby/on] button to off mode, and press the

[STANDBY/ON] button again to turn the power switch on.

Hold the first white key and first black key on the left

side of the keyboard at the same time and then turn on

the unit to deactivate the AUTO STANDBY function.

STANDBY/ON

ACC.

VOLUME

VOLUME BASS

TREBLE

MASTER

VOLUME

I

1.AUTO STANDBY

Demo Play

There are 16 demo songs that you can play individually. Here's how you can

select and play the demo songs .

1. Listen to the Demo Song

Press [DEMO/LEARN] button to play the demo songs in sequence. Use [+/-]

buttons or [DATA CONTROL] knob to select the number of the song you want to

play.

2. Stop Playing

Press [DEMO/LEARN] button again to stop playing.

DEMO / LEARN

8

2.Use Number Button and [+/-] Buttons

Press the [NUMBER] button, the indicator light color is red. Now you can use

number 0~9 or [+/-] Buttons to select voice.

Voice 01~09 :press number 0 first, then press 1~9

Voice 10~99 : press two numeric buttons directly, for example: to select 99

press the number 9 button and then the number 9 to select the

sound.

Voice 100~479: press the number Press 1 to 4 of a button and hold it until

the number appears on the display, then you can enter the tens

and ones digits.

For example: to select 123 Sea Shore press number 1 button and hold it

until 1_ appears, then press the number 2 and the number 3 buttons to select

the sound.

You also can press the [+/- ] buttons until the desired voice appears on the display.

Selecting a Voice

Your instrument has 479 voices,include 128(01-128) GM standard voices.

[+] / [-] buttons or

[DATA CONTROL] knob

You can use the voice button on the panel, use

to select voice.

1.Selecting Voice Directly

When the [VOICE/STYLE] button is unlighted, means your piano is in Voice

mode, now you can use the voice button on the panel to select voice directly, the

first row of buttons below as the direct sound.

Voices

PIANO

8 BEAT

1 2 3 4 5

6

NUMBER

ORGAN

GUITAR

BASS

USER VOICE

BALLAD

DANCE

DISCO

USER STYLE

7

8

9

0

9

NOTE

When [VOICE/STYLE] button is unlighted, it meams the current selection

in VOICE mode .

When [VOICE/STYLE] button is lighted, it meams the current selection in

STYLE mode .

When [NUMBER] button is unlighted, it meams the current selection in

direct VOICE or STYLE mode.

When [NUMBER] button is lighted, it meams the current selection in

NUMBER SELECT mode .

Dual Mode

In dual mode two voices may be played simultaneously, each at selected volumes.

press [DUAL] button and the

To adjust the volume of the Dual Voice, please refer to D.Volume in MIXER

function. P11

to exit.

indicator is flashing, then press the voice button to

select the second voice.No operation in 4 seconds, the display will be returned to

the Main Voice mode.

Press [DUAL] button again

DUAL

In the Voice Mode, clockwise or counterclockwise rotation [DATA CONTROL],

can quickly select the Voice.

Clockwise rotation is increasing rapidly, counterclockwise rotation for the rapid

decline.

3.Use Data Control Knob

10

Mixer

Press [MIXER]button ,you can select M

M

.Volume , S.Volume ,

D.Volume , Metro Volume , USB Volume

When not in Dual mode or Split mode, press the [MIXER] button repeatedly

to select .Volume , then use [Data Control] knob

to set the Main Volume. Range: 00~127. Default: 127.

Press the [MIXER] button repeatedly to select S.Volume , indicator

is flashing, then use [Data Control] knob to set the main

volume. Range: 00~127. Default: 127.

Press the [MIXER] button Repeatedly to select D.Volume , indicator

is flashing, then use [Data Control] knob to set the Main

Volume. Range: 00~127. Default: 127.

[+/-] Buttons or

the

[+/-] Buttons or

the

[+/-] Buttons or

MIXER

1. M.Volume

2. S.Volume

3. D.Volume

11

4. Metro Volume

Press the [MIXER] button Repeatedly to select Metro.Volume , then use

[Data Control] knob to set the Main Volume. Range: 00~127.

Default: 100.

[+/-]

Buttons or

5. USB Volume

Press the [MIXER] button Repeatedly to select USB Volume , then use

[Data Control] knob to set the Main Volume. Range: 00~127.

Default: 100.

[+/-]

Buttons or

Playing Portable Grand Piano

Press [GRAND PIANO] button.

This convenient function lets you instantly call up the Grand Piano voice.

MIXER

GRAND PIANO

12

Keymode

You can adjust the chord, pianist, harmony, split piont, twin by pressing

[KEYMODE]button.

1. Chord mode

Press [KEYMODE] button, select chord mode, LCD will display C symbol in

the upper right corner of the screen. The specified left-hand section

of the keyboard becomes the Auto Accompaniment section, and chords played

in this section are automatically detected and used as a basis for fully automatic

accompaniment with the selected style.

(left 34 keys)

2. Chord point

Select Normal mode at first,and then hold down the [KEYMODE] button until the

display shows "C.Point", then use the [+/-] buttons or turn the data to set chord

point. Range:00~87.

3. Pianist mode

Press the [KEYMODE] button repeatedly to select keyboard mode, LCD will

display P symbol in the upper right corner of the screen.

KEYMODE

13

4. Harmony mode

Press the [KEYMODE] button repeatedly to select harmony mode, LCD will

display H symbol in the upper right corner of the screen.

5. Split mode

Press the [KEYMODE] button repeatedly to select split mode, LCD will display

S symbol in the upper right corner of the screen, your keyboard will be split

into sctions which means different voices can be played with the left and right

hands at the sanme time.

6. Split point

Select harmony mode at first,and then hold down the [KEYMODE] button until

the display shows S.Point , then use the [+/-] buttons or turn the data to set

split point. Range:00~87.

KEYMODE

14

7. Twin mode

Press the [KEYMODE] button repeatedly to select twin mode, LCD will display

T symbol in the upper right corner of the screen, the keyboard will be separated

into two play areas.

#

Right: from C3 to C7

Left: from A-1 to C3

Transpose

The Transpose function allows you to change the pitch of the instrument in semitone

steps, up to a maximum setting of 12 semitones (a maximum of one octave up or down).

Press [ Use [+/- ] buttons to transpose up or down as required.

The transposition range is from -12 (down one octave) through 0 (normal

pitch) to 12 (up one octave).

TRANS./TUNE] button ,

KEYMODE

TRANS.

TUNE

15

Tune

The function makes it possible to tune the pitch of your imstrument to match

other instruments.Press [ ] button repeatedly, LCD will display

TUNE , use [+/-] buttons to set Tune value:-64-63.

TRANS./TUNE

Tempo/Tap

Press the [TEMPO/TAP] button, use[+/-] buttons or [DATA CONTROL] knob to

decrease or increase the tempo, metronome and styles. Range: 20-280.

If you want to set the tempo before starting rhythm, you have to tap the button

4 times, automatic accompaniment of percussion can start automatically according

to the speed of your keys.

Tap on the button 2 times while rhythm is playing, the rhythm tempo are set as

your desired speed.

TEMPO / TAP

TRANS.

TUNE

16

Page is loading ...

Ringway OCDTG8862 User manual

This manual is also suitable for

Ringway OCDTG8862 User manual

Other documents