Page is loading ...
VOLKSWAGEN
All installaon work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
04/2023 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
All installaon work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
04/2023 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
INSTALLATION MANUAL
Model: T6.1
Facia plate installaon kit for:
Kit content: Facia plate
Mounng brackets
Screws
Year: 2019
Compability: Compable with Alpine Halo
Customer code: KIT-F9VW-T61
9) Drill the dashboard to create the needed
holes.
10) Screw the radio block into the
dashboard using 4 screws 'B' (2 on each
side), then replace the OEM radio frame.
Attach the Alpine display to the
assembled radio block in the dashboard
and fix it.
9)
10)
11) 11) What it looks like aer the
previous steps.
Scr
ews
"A"
Screws
"B"
Screws
"C"
6 Take facia plate; mounng brackets and
the screws.
8 Place the radio block in the dashboard and
mark the 4 holes.
"A"
"A"
"C"
"C"
1) This is what the original radio looks like.
STEPS FOR REMOVING THE ORIGINAL OEM RADIO:
STEPS FOR INSTALLATION THE NEW RADIO:
2) Removing the instrument panel frame.
4) Removing OEM radios with Volkswagen keys.
7 Screw the both brackets with 6 screws 'A'
(3 on each side) to the main unit of Alpine Halo.
Screw the facia plate to the brackets using
screws 'C' (2 on each side).
1)
2)
3)+))
4)
5)5 What it looks like aer the previous steps.
6)
8)
7)
3) Removing the radio frame.
/
