Taurus Dual Master is a dual-channel guitar amplifier that offers a wide range of features and capabilities for guitarists of all levels. It has two independent channels, each with its own set of controls, so you can create two completely different sounds and switch between them with the included footswitch.
The Taurus Dual Master is also equipped with a variety of effects, including reverb, delay, and chorus, so you can add depth and texture to your sound. And with its built-in tuner, you can always make sure your guitar is in tune.
Here are some of the other features of the Taurus Dual Master:
Taurus Dual Master is a dual-channel guitar amplifier that offers a wide range of features and capabilities for guitarists of all levels. It has two independent channels, each with its own set of controls, so you can create two completely different sounds and switch between them with the included footswitch.
The Taurus Dual Master is also equipped with a variety of effects, including reverb, delay, and chorus, so you can add depth and texture to your sound. And with its built-in tuner, you can always make sure your guitar is in tune.
Here are some of the other features of the Taurus Dual Master:
The amp is based on a technology.
It is our own groundbreaking technology which permits us to create powerful guitar amplifiers
in very compact shapes. This technology uses all the significant features of tubes which
determine the warm, classic sound of guitar amps. We offer players an amplifier with
extremely light weight, very compact dimensions and powerful sound. The sound
characteristics and power of the amplifiers based on our MTD technology are equal to the
classic tube amps with the same power rating.
The Taurus Dual Master is designed for guitarists who want to build their own sound based on
stereo effects or want to use two amps at once. Each amplifier can be independently switched
ON, thus they can be use separately or together in various modes:
Stereo mode , when the stereo output of the pedal board or guitar sound module is
connected.
Mono mode, where two guitars are connected and each of the amplifiers is working with
its own guitar and speaker cabinet.
Classic mode, when only one of amplifiers is used.
Additional advantage of Dual Master. in contrary of using two separate amplifiers at the same
time, is that an external Amp Selector (eliminates hum or loss of tone.) or Power Attenuator do
not have to be used at all.
Each of the Dual Master amplifiers offer guitarists two channels with separate GAIN and
VOLUME controls. It makes it possible to use two different sound settings via foot-switch.
Beside the GAIN and VOLUME controls, each channel is equipped with BASS, MIDDLE,
TREBLE, PRESENCE potentiometers and BOOST, BASS-RANGE, MID-RANGE switches.
The MID-RANGE switch changes the range of frequency of the MIDDLE potentiometer while
the BRIGHT/DARK switch alters the high frequency range. This option is very useful in the
proper setting of the guitar’s sound in an overall band mix, depending on the style of music
played and type of guitar used. It allows also to experimenting with sounds using eg. two
amplifiers connected with cabinets equipped with different types of speakers. The footswitches
allow for separate control of each amplifier, as well as both of them at once. The amp is
equipped with internal selector amplifiers (Amps-Switch) with output to external controller or
footswitch. Each of amps has their own separately power supply, ON/OFF switch and fuses,
what makes them completely independent.
Dual Master MTD (Master Tube Design)
Power output - 2x90 Watt / 4ohm, 8ohm,16ohm
Power brake to 2x40W, 2x20W i 2x12W
Speakers impedance auto detection
Tubes: 12AX7
Two channels preamp
Channel controls:
BASS, MIDDLE, TREBLE, GAIN-1, GAIN-2, PRESENCE, VOLUME-1, VOLUME-2
Additional futures: INPUT-BOOST, BASS-RANGE, MID-RANGE
Serial effects loop
LINE OUTPUT with speaker simulation
The ability to send the linear signal with or without simulation or both at the same time
Footswitch or external controller outputs:
channel selection: GAIN-1/GAIN-2 and VOLUME-1/VOLUME-2
amp selection: AMP1or AMP2 oand AMP1+AMP2
Voltage selector: 230V/50Hz or 120V/60Hz
Dimensions: (H x W x D) 210 x 395 xx 185 mm
Weight: 5,1kg
− 1 −
SPECIFICATIONS
− 2 −
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 1/2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
1
Amp-
Amp-
2
Taurus
Amplification
Dual
Master
Master Tube Design
Master Tube Design
1 3
2 4 6
1413 ' 15 1716 18 19 20
10 11 12
985 7
1 3
2 4 6
1413 ' 15 1716 18 19 20
10 11 12
985 7
Front panel AMP-2
Front panel AMP-1
PRONT PANEL
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
- INPUT
Note: When guitar is connected to input AMP-1 only, signal is sent to both
amplifiers simultaneously. When both inputs are used, each amplifier
works separately.
- INPUT GAIN boost (+6dB).
- BASS control.
- BASS-RANGE switch - changes range of BASS control parameters.
- control.
- MID-RANGE switch - changes range of MIDDLE control parameters.
- control.
- GAIN control for channel-1 (CRUNCH).
- GAIN control for channel-2 (LEAD).
- PRESENCE control
- VOLUME / channel 1.
- VOLUME / channel 2
- LED indicator for GAIN-1.
- Channel selector.
- LED indicator for GAIN-1.
- LED indicator for VOLUME-1.
- Power selector:
40Watt/90Watt in STAGE mode.
12/20Watt in STUDIO mode.
- LED indicator for VOLUME-2.
- LED indicator
- STANDBY
MIDDLE
TREBLE
− 3 −
REAR PANEL
AMPS-SWITCH
External controller
wire connection AMP1 + AMP2 − RING
AMP1/AMP2 − TIP
Stereo jack
Ground
Fuse
2.5A/230V
4A/120V
F-1 F-2
4-8-16ohm
AMP-1 AMP-2
OUTPUT
4-8-16ohm
THIS APPARATUS MUST BE EARTHED
SELECTABLE POWER OUTPUT: STAGE: 2x40W/90W (RMS) / STUDIO: 2x12W/20W (RMS)
MAINS
AMP-1
MAINS
AMP-2
TO REDUCE THE RISK
OF FIRE
OR ELECTRIC SHO CK,
DO N OT EX POS E
THIS PRODUCTS
TO RAIN OR MOISTURE
WARNING!
TO REDUCE THE RISK
OF ELECTRIC SHOC K,
DO N OT RE MOV E COVER.
REFER S ERVICI NG TO
QUALIFIED
SERVICE PERSONNEL
CAUTION!
AMP-1
MAIN
(AMP1-2)
LINE
OUT
SEND
RET.
FOOT
SW.
AMP-2
STAGE STUDIO
SERIAL NO:
Made in EU
A
M
P
S
-
S
W
I
T
C
H
A
M
P
1
/
2
&
A
M
P
1
+
2
1 1
2 2
3 3
4
7 7
9
8
10 10
11
4
5 6
series
Guitar Amplifier
Master
[1]
[2]
[3]
[4]
[6]
[8]
[9]
[10]
[11]
- LINE OUT dual line output: with and without speaker cabinet simulation
- SEND serial effect loop output
- RETURN serial effect loop input and input to power amp section.
- FOOT-SWITCH input for channel selector footswitch. It is possible to
select channels separately for each amplifier (two footswitches
connected to two inputs [4]) or simultaneously for both of them (one
footswich connected to input [4] on AMP-1 only).
AMPS-SWITCH output for connecting an external controller or footswitch
so you have access for switching the amps in followinh options:
AMP1 or AMP2 and AMP1 + AMP2.
- POWER BRAKE power selector switch allows power reduction.
In position STAGE we have available power 40W or 90W selected by the
switch [17] on the front panel. In position STUDIO we have available
power 12W or 20W selected by the switch [17] on the front panel.
- Speakers output / impedance: 4-8-16ohm [auto detect. impedance]
- POWER on/off switch.
- Voltage selector 230V/120V
- FUSE: 2,5 A/230V [4A/120V]
- AC POWER input.
[5]
[7]
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 1/2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
1
Amp-
Amp-
2
Taurus
Amplification
Dual
Master
Master Tube Design
Master Tube Design
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 1/2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
1
Amp-
Amp-
2
Taurus
Amplification
Dual
Master
Master Tube Design
Master Tube Design
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 1/2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
1
Amp-
Amp-
2
Taurus
Amplification
Dual
Master
Master Tube Design
Master Tube Design
SUGGESTED CONFIGURATIONS
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 1/2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
1
Amp-
Amp-
2
Taurus
Amplification
Dual
Master
Master Tube Design
Master Tube Design
Pedalboard
Pedalboard
A
B
C
D
− 4 −
Mono mode: Two amplifiers with two cabinets.
Mono mode: Two guitars connected to two channels.
Stereo mode: Two amplifiers with pedalboard connected to effects loop.
Stereo mode: Two amplifiers with pedalboard connected to both inputs.
Fuse
2.5A/230V
4A/120V
F-1 F-2
4-8-16ohm
AMP-1 AMP-2
OUTPUT
4-8-16ohm
THIS APPARATUS MUST BE EARTHED
SELECTABLE PO WER OUTPUT: STAGE: 2x4 0W/90 W (RMS) / STUDIO: 2 x12W/ 20W (RMS)
MAINS
AMP-1
MAINS
AMP-2
TO RE DUCE T HE RIS K
OF FI RE
OR EL ECTR IC SHOC K,
DO NO T EXPO SE
THI S PROD UCTS
TO RA IN OR MOI STUR E
WARNING!
TO RE DUCE T HE RIS K
OF ELE CTRI C SHOCK ,
DO NO T REMO VE COV ER.
REF ER SER VICIN G TO
QUA LIFI ED
SER VICE PE RSON NEL
CAUTION!
AMP-1
MAIN
(AMP1-2)
LINE
OUT
SEND
RET.
FOOT
SW.
AMP-2
STAGE STUDIO
SERIAL NO:
Made in EU
A
M
P
S
-
S
W
I
T
C
H
A
M
P
1
/
2
&
A
M
P
1
+
2
1 1
2 2
3 3
4
7 7
9
8
10 10
11
4
5 6
series
Guitar Amplifier
Master
AMPS−SWITCH
Foot−−switch
CH−1/CH2
1/2 or 1+2
AMPS
SWITCH
1/2 1+2
CHANNEL
SWITCH
C
H
-
1
/
C
H
-
2
− 5 −
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 1/2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
1
Amp-
Amp-
2
Taurus
Amplification
Dual
Master
Master Tube Design
Master Tube Design
Stereo EFX
EFX EFX
CONNECTIONS CONFIGURATION
Stereo mode: Stereo EFX connected to effects loop
and to input of the amp.
Input AMP-1
sends a signal to both
amplifiers
(AMP-1 and AMP-2)
simultaneously
− 6 −
LINE OUTPUT
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
BASS
RANGE RANGE SELECT
MIDDLE TREBLE GAIN-2GAIN-1 PRESENCE VOLUME-1 VOLUME-2
BOOST
INPUT 1/2 STANDBY
2
46
8
100
2
46
8
100
2
46
8
100
2
46
8
100
3
11
3
55
3
11
3
55
3
11
3
55
3
11
3
55
40/90W
(Studio:12/20W)
1
Amp-
Amp-
2
Taurus
Amplification
Dual
Master
Master Tube Design
Master Tube Design
EFX EFX
Stereo EFX
CONNECTIONS CONFIGURATION
Signal without speaker simulation
Stereo jackMono jack
Ground
Ground Fig.A
LINE−OUT wire connection
Signal with speaker simulation Signal with speaker simulation
Stereo mode: Stereo EFX output is connected to both inputs.
Line output provides two signals: with and without speaker simulation.
You can use speaker simulation (with mono plug)
or both of them (with stereo plug).
Amplifier produces high volume levels. Staying in places of high volume levels could
cause permanent hearing loss.
Do not use the amplifier in humid and dusty places.
Do not operate the amplifier through the unearthed socket.
Do not leave the amplifier in the vicinity of children.
Do not use the amplifier with broken power outlet or improper power cord.
Do not install nor use the amplifier near any heat sources, in case of overheating the
amplifier turns off
In order to ensure proper air circulation, do not block any of the ventilation openings.
Never put any liquid containers near the amplifier.
In case of any objects or liquid access inside the amplifier, urgently switch the apparatus
off and unplug the power supply cord.
Protect the amplifier from any strikes.
ATTENTION: To reduce the risk of electrical shock, do not remove the back cover of the
amplifier. Inside parts can be repaired only by qualified service personnel.
WARNING: To prevent the risk of electrical shock do not expose this appliance to
moisture, rain or any liquid.
Do not cover the vent
holes!
and will return to work after cooling the unit.
PRECAUTIONS
Disposal of old Electrical & Electronic Equipment (Applicable throughout the European Union and other
European countries with separate collection programs)
This symbol, found on your product or on its packaging, indicates that this product should not be treated as household waste
when you wish to dispose of it. Instead, it should be handed over to an applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate disposal of this product. The recycling of
materials will help to conserve natural resources. For more detailed information about the recycling of this product, please
contact your local city office, household waste disposal service or the retail store where you purchased this product.
Box Electronics ul. Cieszyńskiego 4, 81-881 Sopot, Poland
e-mail [email protected] / www.taurus-amp.pl
RoHS
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Taurus Dual Master is a dual-channel guitar amplifier that offers a wide range of features and capabilities for guitarists of all levels. It has two independent channels, each with its own set of controls, so you can create two completely different sounds and switch between them with the included footswitch.
The Taurus Dual Master is also equipped with a variety of effects, including reverb, delay, and chorus, so you can add depth and texture to your sound. And with its built-in tuner, you can always make sure your guitar is in tune.
Here are some of the other features of the Taurus Dual Master:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Faurus Stomp-Head 5 Owner's manual
-
BluGuitar AMP1 User manual
-
Fractal Axe-Fx ULTRA User manual
-
Mesa Boogie Mark Five User manual
-
Fractal AXE-FX II Owner's manual
-
Avid Technology Eleven Rack User manual
-
SWR Mini-Mo' User manual
-
Fractal AXE-FX II Quick Reference Manual
-
Fractal Audio AXE-FX II Quick Reference Manual
-
Fractal AXE-FX II Quick Reference Manual
