LIGHT MY BRICKS 10305 Operating instructions

LEGO LION KNIGHTS’ CASTLE #10305

LIGHT KIT

INSTALLATION GUIDE

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTALLATION GUIDE 2

Light My Bricks

LEGO THE LION KNIGHTS’ CASTLE 10305

INSTALLATION GUIDE

Hi There!

We’re here to help you get started on the LEGO

The Lion Knights’ Castle 10305 Light Kit.

This PDF details the instructions for the LED light kit only. If

you are wishing to purchase this product, please click here

to view the product page.

If you run into any issues, please refer to the troubleshoot-

ing section towards the end of this guide.

Have fun and enjoy!

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

v

PACKAGE CONTENTS 3

PACKAGE CONTENTS: ASSORTED BRICKS:

1 x White 30cm Bit Light

2 x Yellow 30cm Bit Light

2 x Blue 30cm Bit Light

13 x Orange 30cm Bit Light *

3 x Warm White 30cm Large Bit Light

9 x Orange 30cm Large Bit Light *

2 x 2-Port Expansion Board

9 x 6-Port Expansion Board *

4 x Flicker Eects Board

• 30 x Round Plate 1x1 w/ Open Stud - Black *

• 1 x Candle Flame

• 2 x Round Plate 1x1 - Trans Orange

• 4 x Round Plate 2x2 w/ Rounded Bottom - Trans Clear

• 4 x Tile 1x1 W Clip Round Edges - Black

• 4 x Plate 1x1 Mod Rounded w Handle - Black

• 1 x Plate 1x2 MW Stud Jumper - Black

• 1 x Round Plate 1x1 - Trans Blue

6 x 5cm Connecting Cable

1 x 15cm Connecting Cable

3 x 30cm Connecting Cable

5 x 50cm Connecting Cable *

1 x USB Power Cable

14 x Adhesive Squares

* Indicates components which include spares

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

CONTENTS 4

Contents

Before You Begin

Blueprint

Instructions

Final Product

Troubleshooting

Contact

5

8

10

72

73

78

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 5

Before You Begin

Laying cables in between

and underneath bricks

Cables can ﬁt in between and underneath

LEGO® bricks, plates, and tiles providing

they are laid correctly between the

LEGO® studs. Do NOT forcefully join

LEGO® together around cables; instead

ensure they are laying comfortably in

between each stud.

CAUTION: Forcing LEGO® to connect over

a cable can result in damaging the cable

and light.

Connecting Cable

Connectors To Expansion

Boards

Take extra care when inserting connectors

to ports of Expansion Boards. Connectors

can be inserted only one way. With the

expansion board facing up, look for the

soldered “=” symbol on the left side of the

port. The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into the

port. If a plug won’t ﬁt easily into a port

connector, do not force it.

Incorrectly inserting the connector can re-

sult in bent pins inside the port or possible

overheating of the expansion board when

connected.

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 6

Before You Begin

Connecting Cable

Connectors To Strip Lights

Take extra care when inserting connectors

to ports on the Strip Lights. Connectors

can be inserted only one way. With the

Strip Light facing up, ensure the side of

the connector with the wires exposed is

facing down. If a plug won’t ﬁt easily into

a port connector, don’t force it. Doing so

will damage the plug and the connector.

Connecting Micro Cable

Connectors To Micro

Expansion Board Ports

Take extra care when inserting the

micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit

Lights to Micro Expansion Boards is similar

to connecting lights and cables to Strip

Lights. With the expansion board facing

up, ensure the side of the connector with

the wires exposed is facing down. If a plug

won’t ﬁt easily into a port connector, do

not force it. Use your ﬁngernail to push the

plastic part of the connector to the micro

port.

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 7

Before You Begin

Installing Bit Lights Under

Lego® Bricks And Plates

When installing Bit Lights under LEGO®

pieces, ensure they are placed the correct

way up (Yellow LED component exposed).

You can either place them directly on top of

LEGO® studs or in between.

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 8

BLUEPRINT

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 9

BLUEPRINT

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 10

INSTRUCTIONS

To ensure a smooth installation of

your light kit, please read and follow

each step carefully. If you run into

any issues, please refer to the online

troubleshooting guide.

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 11

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

1

2

Black Round Plate 1x1

w/ Open Stud

Orange 30cm Large Bit Light

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 12

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

3

Black 1x1 Plate Modiﬁed Plate

Rounded w/ Handle

Black 1x1 Tile w/ Clip

Rounded Edges

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 13

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

4

Black Round Plate 1x1

w/ Open Stud

Orange 30cm Large Bit Light Black Round Plate 1x1

w/ Open Stud

Thread both of

the cables through

the Open Stud

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 14

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

5

6-Port Expansion Board

Orange 30cm Large Bit Light Plate 2x2 W Rounded Bottom -

Trans Clear

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 15

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

6

Warm White 30cm Large Bit Light

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 16

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

7

30cm Connecting Cable

2-Port Expansion Board

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 17

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

8

Adhesive Square

Black Round Plate 1x1

w/ Open Stud

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 18

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Push the cables

up to the ceiling so

they are not visible

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 19

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

96-Port Expansion Board

15cm Connecting Cable

50cm Connecting Cable

LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 20

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

10

Thread the 50cm

Connecting Cable

from the previous

step through the

Round Plate 1x1 w/

Open Stud - Black

Ensure to only lift

up the plate as much

as shown. Lifting too

far will cause the

Large Orange Bit

Light you installed

previously to come

loose.

Black Round Plate 1x1

w/ Open Stud

Page is loading ...

LIGHT MY BRICKS 10305 Operating instructions

LIGHT MY BRICKS 10305 Operating instructions

Related papers

Other documents