2. Champion Power Equipment
  3. 200910

Champion Power Equipment 200910, 200909 Installation guide

  • Hello, I've reviewed the wiring diagram for the 200A transfer switch, which details the connections between the disconnect switch and the Reliance ATS. This document includes installation instructions, wiring details, and information on local code compliance. I'm ready to answer any questions you have about this diagram and the devices it describes.
  • What is the purpose of this document?
    What are the installation instructions for the disconnect switch?
    What document should I consult for the ATS wiring instructions?
DISCONNECT SWITCH
200A TRANSFER SWITCH.
TO DISTRIBUTION
PANEL
UTILITY
L1 L2
NOTES:
1.
FOLLOW DISCONNECT SWITCH 100893 INSTALLATION INSTRUCTIONS.
2. REFER TO ATS MODEL 101380 MANUAL FOR LOAD, COMMUNICATION, AND LCM WIRING INSTRUCTIONS.
3. ALL LOCAL CODES MUST BE FOLLOWED.
N-G
FROM HSB
NEUTRAL TIE BLOCK
GROUND
D
E
F
C
1
2
3
4
B
A
3
2
1
5
C
D
4
6
7
8
A
B
SCHEMATIC, DISCONNECT SWITCH TO RELIANCE ATS
DO NOT SCALE DRAWING
102605
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1
WEIGHT: g
REV
DWG. NO.
A3
SIZE
TITLE:
DATE
CHECKED BY
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
CHAMPION ENGINE TECHNOLOGY. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
CHAMPION ENGINE TECHNOLOGY IS
PROHIBITED.
VIEWS ARE IN 1ST
ANGLE PROJECTION
ISO 1101 : 2012
8
7
6
5
F
E
MODELED BY
ENG. APPROVAL
NAME
DRAWN BY CET
COMMENTS:
LAJ
SEE 3D MODEL FOR UNSPECIFIED GEOMETRY
DIMENSIONS ARE IN MILLIMETERS
LINEAR:
0.3 HOLE: +0.3/-0
ANGULAR: MACH
0.5° BEND
1°
SURFACE FINISH-MACHINED: 3.2Ra
THREADS: 6H/6g
COAXIAL FEATURES: Ø0.3 TRUE POSITION
1/8/2020
/