Pioneer CNSD 250 FM Operating instructions

Brand: Pioneer

Model: CNSD 250 FM

Category: Car navigation systems

Type: Operating instructions

This manual is also suitable for

CNSD 200 FM

Upgrade Instructions and

Operation Manual Addendum

2010 F-series NAVIGATION UPGRADE SD-CARD

CNSD-250FM

CNSD-200FM

This software upgrade will result in changes to certain

features and availability of information. While the

changes are intended to improve the overall user

experience for most users, Pioneer and its licensors

disclaim any warranty or liability for damages in

connection with such changes.

English

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate

your model properly.

Important

! The screens shown in the examples may

differ from actual screens.

! Actual screens may be changed without

notice for per formance and function im-

provements.

Precaution

In case of trouble 3

Visit our website 3

SD memory card 3

Manual overview 3

Conventions used in this manual 3

Models to be upgraded 4

– To customers who have purchased the

CNSD-250FM 4

– To customers who have purchased the

CNSD-200FM 4

Renewed points through this upgrade 4

– For customers upgrading the hardware

for the first time 4

– For customers who have previously

upgraded the hardware 4

Setting items to be deleted and initialised by

upgrade 6

Licence agreement

PIONEER CNSD-250FM, CNSD-200FM 7

TERMS AND CONDITIONS FOR TELE ATLAS

DATA 9

– End User Licensing Terms 9

Licenses 14

About the database

About the data for the map database 19

Instructions for upgrading

The navigation system upgrade process 20

Preparation for upgrade 20

– Checking the device number 20

– Checking the current version 20

– Getting the password for

authentication 21

Upgrade procedures 21

– Upgrading the software programme

and the map database 21

– Checking whether the upgrade was

done properly 22

– Updating the Bluetooth wireless

technology software 23

Changes on the upgraded programme

Navigation functions 24

– Signpost and recommended lane 24

– Switching the map mode 24

– Hiding controls for tilt and rotation

angle 25

– Searching for POIs around the

address 25

AV functions 26

– Selecting a track from the list 26

Settings Menu 26

– Textured Polygons 26

– POI Settings 26

– Displayed Info 27

– Manage Track Logs 27

– Changes of default value 27

Restore Factory Settings 28

– Setting items to be deleted 29

Troubleshooting

Problems in the procedures for updating 31

Messages in the procedures for

updating 31

Contents

Engb

! Read the entire manual before upgrading

the programme of your navigation system.

! This package is unique, and cannot be in-

stalled on more than one unit.

In case of trouble

! Should the navigation system fail to oper-

ate properly, contact your dealer or nearest

authorised Pioneer Service Station.

! Do not lose the supplied Media Number

Card (MEDIA NUMBER CARD). If the

Media Number Card is lost, reissue of the

Media Number (MEDIA NUMBER) is not

possible. Also you must submit the Media

Number Card when repairs are needed.

The card is necessary as proof of authenti-

city if service is required (including re-

covery).

Visit our website

Visit us at the following site:

http://www.pioneer.eu

! Register your product. We will keep the de-

tails of your purchase on file to help you

refer to this information in the event of an

insurance claim such as loss or theft.

! We offer the latest information about

Pioneer Corporation on our website.

SD memory card

p Keep the SD memory card out of the reach

of small children to prevent them from ac-

cidentally swallowing it.

p Do not store the SD memory card in high

temperatures or direct sunlight.

p Do not subject the SD memory card to

shock or impact.

p Do not allow the SD memory card to come

into contact with liquids. Damage to the

SD memory card and your products could

result from contact with liquids.

p Be careful not to touch terminals on the

SD memory card. Doing so may cause con-

nection failures. If any terminals are dirty,

wipe them with a clean dry cloth.

p SD Logo is a trademark of SD-3C, LLC.

Manual overview

This manual describes how to get the pass-

word and activate the upgrade. It also provides

an overview of how functions change after the

upgrade.

Conventions used in this

manual

Before moving on, take a few minutes to read

the following information about the conven-

tions used in this manual. Familiarity with

these conventions will help you greatly as you

learn how to use your new equipment.

! Buttons on your navigation system are de-

scribed in ALL CAPITAL, BOLD lettering:

e.g.)

With the map displayed, press the MENU

button.

! Items in different menus, screen titles, and

functional components are described in

bold with double quotation marks “”:

e.g.)

Displaying the “System Settings” screen

! Touch panel keys that are available on the

screen are described in bold in brackets [ ]:

e.g.)

Touch [Settings].

! Extra information, alternatives and other

notes are presented in the following for-

mat:

e.g.)

p If the home location has not been stored

yet, set the location first.

Engb

Chapter

Precaution

! References are indicated like this:

e.g.)

= For details of the operation, refer to

Checking the device number on page

20.

Models to be upgraded

To customers who have

purchased the CNSD-250FM

This package can upgrade the software pro-

gramme and database of the following mod-

els:

AVIC-F500BT

This package comes with upgrade SD memory

cards A and B.

The type of the upgrade SD memory card you

need to use depends on the state of your navi-

gation system.

Check the following before using the upgrade

SD memory card.

Customers upgrading the hardware for

the first time

Use the upgrade SD memory card A.

Customers use the hardware upgraded

by CNSD-150FM

Use the upgrade SD memory card B.

To customers who have

purchased the CNSD-200FM

This package can upgrade the software pro-

gramme and database of the following mod-

els:

AVIC-F9110BT, AVIC-F910BT, AVIC-

F900BT, AVIC-F710BT, AVIC-F700BT

This package comes with upgrade SD memory

cards A and B.

The type of the upgrade SD memory card you

need to use depends on the state of your navi-

gation system.

Check the following before using the upgrade

SD memory card.

Customers using AVIC-F900BT or AVIC-

F700BT, and customers upgrading their

hardware for the first time

Use the upgrade SD memory card A.

Customers using AVIC-F900BT or AVIC-

F700BT, and customers upgraded the

hardware with the CNSD-100FM

Use the upgrade SD memory card B.

Customers using AVIC-F9110BT, AVIC-

F910BT, AVIC-F710BT

Use the upgrade SD memory card B.

Renewed points through

this upgrade

For customers upgrading the

hardware for the first time

For customers using AVIC-F500BT,

AVIC-F900BT or AVIC-F700BT

By upgrading the navigation system with this

product, the points described in this manual

are changed.

For customers using AVIC-F9110BT,

AVIC-F910BT or AVIC-F710BT

By upgrading the navigation system with this

product, following points are changed.

! Map database (including POI) is renewed.

! Device Number is displayed on the “Ser-

vice Information” screen.

The other operations are essentially the same

as those at the time you purchased the hard-

ware. Use the Operation Manual included in

the hardware package as your primary refer-

ence.

For customers who have

previously upgraded the hardware

By upgrading the navigation system with this

product, following points are changed.

! Map database (including POI) is renewed.

Engb

Chapter

Precaution

! Device Number is displayed on the “Ser-

vice Information” screen.

The other operations are essentially the same

as those at the time you purchased the hard-

ware. Use the Operation Manual included in

the hardware package as your primary re-

ference.

Engb

Chapter

Precaution

Setting items to be deleted and initialised by upgrade

The following data and settings will be cleared and reset to defau lt values. Other items will be retained. How-

ever, some items are not listed because the setting can be easily recovered by users, such as the last map

scale, the last status of AV operation screen, etc.

Navigation functions

Destination Menu

All settings on “TMC Control Centre”

“History” on “Address”

History

Favourites

“Saved Criteria” on “POI”

Navi Settings All settings

System Settings All settings

Others

Pin icon data

Speed camera data

Anti-theft password

Audio functions

AV Settings All settings

SD, USB All settings (*1)

Volume setting for AV sources, EQ settings (*2)

(*1) All settings including the setting on the “Function” menu are deleted.

(*2) These settings are cleared only if you use AVIC-F500BT.

The user data stored in the internal memory of the unit may be erased if an unexpected error occurs during

software installation. Pioneer is not responsible for any data loss or unavailability of user data.

Engb

Chapter

Precaution

PIONEER CNSD-250FM,

CNSD-200FM

THIS IS A LEGAL AGREEMENT BETWEEN

YOU, AS THE END USER, AND PIONEER

CORP. (JAPAN) (“PIONEER”). PLEASE READ

THE TERMS AND CONDITIONS OF THIS

AGREEMENT CAREFULLY BEFORE USING

THE SOFTWARE INSTALLED ON THE

PIONEER PRODUCTS. BY USING THE SOFT-

WARE INSTALLED ON THE PIONEER PRO-

DUCTS, YOU AGREE TO BE BOUND BY THE

TERMS OF THIS AGREEMENT. THE SOFT-

WARE INCLUDES A DATABASE LICENSED BY

THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),

AND YOUR USE OF THE DATABASE IS COV-

ERED BY THE SUPPLIERS’ SEPARATE

TERMS, WHICH ARE ATTACHED TO THIS

AGREEMENT (refer to page 9). IF YOU DO NOT

AGREE WITH ALL OF THESE TERMS, PLEASE

RETURN THE PIONEER PRODUCTS (INCLUD-

ING THE SOFTWARE, AND ANY WRITTEN MA-

TERIALS) WITHIN FIVE (5) DAYS OF RECEIPT

OF THE PRODUCTS, TO THE AUTHORISED

PIONEER DEALER FROM WHICH YOU PUR-

CHASED THEM.

1 GRANT OF LICENCE

Pioneer grants to you a non-transferable, non-

exclusive licence to use the software installed

on the Pioneer products (the “Software”) and

the related documentation solely for your own

personal use or for internal use by your busi-

ness, only on such Pioneer products.

You shall not copy, reverse engineer, translate,

port, modify or make derivative works of the

Software. You shall not loan, rent, disclose,

publish, sell, assign, lease, sublicence, market

or otherwise transfer the Software or use it in

any manner not expressly authorised by this

agreement. You shall not derive or attempt to

derive the source code or structure of all or

any portion of the Software by reverse engi-

neering, disassemb ly, decompilation, or any

other means. You shall not use the Software to

operate a service bureau or for any other use

involving the processing of data for other per-

sons or entities.

Pioneer and its licensor(s) shall retain all copy-

right, trade secret, patent and other proprie-

tary ownership rights in the Software. The

Software is copyrighted and may not be cop-

ied, even if modified or merged with other pro-

ducts. You shall not alter or remove any

tained in or on the Software.

You may transfer all of your licence rights in

the Software, the related documentation and a

copy of this Licence Agreement to another

party, provided that the party reads and agrees

to accept the terms and conditions of this Li-

cence Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are

provided to you “AS IS”. PIONEER AND ITS LI-

CENSOR(S) (for the purpose of provisions 2

and 3, Pioneer and its licensor(s) shall be col-

lectively referred to as “Pioneer”) MAKES AND

YOU RECEIVE NO WARRANTY, WHETHER EX-

PRESS OR IMPLIED, AND ALL WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

ANY PARTICULAR PURPOSE ARE EX-

PRESSLY EXCLUDED. SOME COUNTRIES DO

NOT ALLOW EXCLUSION OF IMPLIED WAR-

RANTIES, SO THE ABOVE EXCLUSION MAY

NOT APPLY TO YOU. The Software is complex

and may contain some non-conformities, de-

fects or errors. Pioneer does not warrant that

the Software will meet your needs or expecta-

tions, that operation of the Software will be

error free or uninterrupted, or that all non-con-

formities can or will be corrected. Further-

more, Pioneer does not make any

representations or warranties regarding the

use or results of the use of the Sof tware in

terms of its accuracy, reliability or otherwise.

Engb

Chapter

Licence agreement

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE

FOR ANY DAMAGES, CLAIM OR LOSS IN-

CURRED BY YOU (INCLUDING, WITHOUT LIM-

ITATION, COMPENSATORY, INCIDENTAL,

INDIRECT, SPECIAL, CONSEQUENTIAL, OR

EXEMPLARY DAMAGES, LOST PROFITS, LOST

SALES OR BUSINESS, EXPENDITURES, IN-

VESTMENTS, OR COMMITMENTS IN CON-

NECTION WITH ANY BUSINESS, LOSS OF

ANY GOODWILL, OR DAMAGES) RESULTING

FROM THE USE OF OR INABILITY TO USE

THE SOFTWARE, EVEN IF PIONEER HAS

BEEN INFORMED OF, KNEW OF, OR SHOULD

HAVE KNOWN OF THE LIKELIHOOD OF

SUCH DAMAGES. THIS LIMITATION APPLIES

TO ALL CAUSES OF ACTION IN THE AGGRE-

GATE, INCLUDING WITHOUT LIMITATION

BREACH OF CONTRACT, BREACH OF WAR-

RANTY, NEGLIGENCE, STRICT LIABILITY, MIS-

REPRESENTATION, AND OTHER TORTS. IF

PIONEER’S WARRANTY DISCLAIMER OR

LIMITATION OF LIABILITY SET FORTH IN THIS

AGREEMENT SHALL OR FOR ANY REASON

WHATSOEVER BE HELD UNENFORCEABLE

OR INAPPLICABLE, YOU AGREE THAT

PIONEER’S LIABILITY SHALL NOT EXCEED

FIFTY PERCENT (50%) OF THE PRICE PAID BY

YOU FOR THE ENCLOSED PIONEER PRO-

DUCT.

Some countries do not allow the exclusion or

limitation of incidental or consequential da-

mages, so the above limitation or exclusion

may not apply to you. This warranty disclaimer

and limitation of liability shall not be applic-

able to the extent that any provision of this

warranty is prohibited by any country or local

law which cannot be pre-empted.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software

nor any other technical data received from

Pioneer, nor the direct product thereof, will be

exported outside the country or district (the

“Country”) governed by the government having

jurisdiction over you (the “Government”) ex-

cept as authorised and as permitted by the

laws and regulations of the Government. If the

Software has been rightfully obtained by you

outside of the Country, you agree that you will

not re-export the Software nor any other tech-

nical data received from Pioneer, nor the di-

rect product thereof, except as permitted by

the laws and regulations of the Government

and the laws and regulations of the jurisdic-

tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.

You may terminate it at any time by destroying

the Software. The Agreement also will termi-

nate if you do not comply with any terms or

conditions of this Agreement. Upon such ter-

mination, you agree to destroy the Software.

6 MISCELLANEOUS

This is the entire Agreement between Pioneer

and you regarding its subject matter. No

change in this Agreement shall be effective

unless agreed to in writing by Pioneer. If any

provision of this Agreement is declared invalid

or unenforceable, the remaining provisions of

this Agreement shall remain in full force and

effect.

Engb

Chapter

Licence agreement

TERMS AND CONDITIONS

FOR TELE ATLAS DATA

End User Licensing Terms

THIS IS A LEGAL AGREEMENT (THE “AGREE-

MENT”) BETWEEN YOU, THE END USER, AND

PIONEER and its licensors of Data product

(sometimes collectively “Licensors”). BY

USING YOUR COPY OF THE LICENSED DATA,

YOU AGREE TO THE TERMS AND CONDI-

TIONS OF THIS AGREEMENT.

1 Grant of License.

Licensors grant you a non-transferable, nonex-

clusive license to use the map data and busi-

ness points of interest information (the

“POIs”), owned by Tele Atlas, (together, the

“Data”) contained on these discs, solely for

personal, non-commercial use and not to op-

erate a service bureau or for any other use in-

volving the processing of data of other

persons or entities. You may make one (1)

copy of the Data for archival or backup pur-

poses only but you may not otherwise copy, re-

produce, modify, make derivative works, derive

the structure of or reverse engineer the Data.

The Data is restricted for use with the

PIONEER Product(s). The Data contains confi-

dential and proprietary information and mate-

rials, and may contain trade secrets, so you

agree to hold the Data in confidence and in

trust and not to disclose the Data or any por-

tions in any form, including by renting, leas-

ing, publishing, leasing, sublicensing or

transferring the Data to any third party. You

are explicitly prohibited from downloading the

digital maps and programmes contained in

the Data or from transferring these to another

data carrier or computer. You are prohibited

from removing or obscuring any copy right,

trademark notice or restricted legend.

2 Ownership.

The Data is copyrighted by Tele Atlas and its Li-

censors and they retain all ownership rights in

the Data. You agree not to alter, remove, oblit-

erate, or obscure any copyright notice or pro-

prietary legend contained in or on the Data.

The current copyrights are to be referred Sec-

tion 12 below.

3 Limitation of Liability.

NEITHER TELE ATLAS NOR ITS SUPPLIERS

SHALL BE LIABLE TO THE UNDERSIGNED

FOR ANY INCIDENTAL, CONSEQUENTIAL,

SPECIAL, INDIRECT OR EXEMPLARY DA-

MAGES ARISING OUT OF THIS AGREEMENT,

INCLUDING LOST PROFITS OR COSTS OF

COVER, LOSS OF USE OR BUSINESS INTER-

RUPTION OR THE LIKE, REGARDLESS OF

WHETHER THE PARTY WAS ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

NOTWITHSTANDING ANYTHING TO THE CON-

TRARY CONTAINED HEREIN, TELE ATLAS

SHALL HAVE NO MONETARY LIABILITY TO

THE UNDERSIGNED FOR ANY CAUSE (RE-

GARDLESS OF THE FORM OF ACTION)

UNDER OR RELATING TO THIS AGREEMENT.

Engb

Chapter

Licence agreement

4 Warranty Disclaimer.

THE DATA IS PROVIDED ON AN “AS IS” AND

“WITH ALL FAULTS BASIS” AND PIONEER,

ITS LICENSORS, AND ITS LICENSED DISTRI-

BUTORS AND SUPPLIERS (COLLECTIVELY,

“SUPPLIERS”) EXPRESSLY DISCLAIM ALL

OTHER WARRANTIES, EXPRESS OR IM-

PLIED, INCLUDING BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF NON-INFRIN-

GEMENT, MERCHANTABILITY, EFFECTIVE-

NESS, COMPLETENESS, ACCURACY, TITLE

AND FITNESS FOR A PARTICULAR PURPOSE.

PIONEER, ITS LICENSORS AND SUPPLIERS

DO NOT WARRANT THAT THE DATA WILL

MEET YOUR REQUIREMENTS OR THAT THE

OPERATION OF THE DATA WILL BE UNINTER-

RUPTED OR ERROR FREE. NO ORAL OR

WRITTEN ADVICE GIVEN BY PIONEER, ITS LI-

CENSORS, SUPPLIERS OR ANY OF THEIR RE-

SPECTIVE EMPLOYEES CREATES A

WARRANTY OR IN ANY WAY INCREASES

PIONEER’, ITS LICENSORS OR SUPPLIERS

LIABILITY AND YOU MAY NOT RELY ON ANY

SUCH INFORMATION OR ADVICE. THIS DIS-

CLAIMER IS AN ESSENTIAL CONDITION OF

THIS AGREEMENT AND YOU ACCEPT THE

DATA ON THIS BASIS.

5 Termination.

This Agreement will terminate immediately

and automatically, without notice, if you

breach any term of this Agreement. You agree

that in the event of termination of the Agree-

ment, you shall return the Data (including all

documentation and all copies) to PIONEER

and its suppliers.

6 Indemnity.

You agree to indemnify, defend and hold

PIONEER, its Licensors, and its suppliers (in-

cluding their respective licensors, suppliers,

assignees, subsidiaries, affiliated companies,

and the respective officers, directors, employ-

ees, shareholders, agents and represent atives)

free and harmless from and against any liabili-

ty, loss, injury (including injuries resulting in

death), demand, action, cost, expense, or

claim of any kind or character, including but

not limited to attorney’s fees, arising out of or

in connection with any use or possession by

you of the Data.

7 Additional Provisions with respect to

the Great Britain Data and Northern Ire-

land data only.

1 End User shall be prohibited from removing

or obscuring any copyright, trademark or re-

strictive legend belonging to Ordnance Sur-

vey.

2 Disclaim all warranties of Ordnance Survey,

whether express or implied, including but

not limited to, the implied warranties of

non-infringement, merchantability, comple-

teness, accuracy, and fitness for a particu-

lar purpose. End User shall acknowledge

that Ordnance Survey makes no warranty

and gives no representation that the Tele

Atlas

MultiNet

data of the United King-

dom is complete, accurate and/or up to

date and it is an essential condition of the

Atlas

MultiNet

data of the United King-

dom on that basis. The Data may include

the data of licensors, including Ordnance

Survey.

3 Disclaim all liability of Ordnance Survey

with respect to the Tele Atlas

MultiNet

data of the United Kingdom.

4 Prohibit the use of the Tele Atlas

MultiNet

data of the United Kingdom in any printed,

published form that results in Value Added

Product to be distributed freely or sold to

the public without the prior permission of

Ordnance Survey.

5 Indemnify Ordnance Sur vey from and

against all claims, demands or actions, irre-

spective of the nature of the cause of the

claim, demand or action alleging loss,

costs, expenses, damages or injuries (in-

cluding injuries resulting from death) aris-

ing out of the use of the Tele Atlas

MultiNet

data of the United Kingdom.

Engb

Chapter

Licence agreement

6 End User accepts the obligation to, on re-

quest, provide Ordnance Survey with infor-

mation on what products and/or services

containing and/or derived from the Li-

censed Tele Atlas Products they produce.

7 End User is liable to Ordnance Survey in

the event of discovery of breach of the

aforementioned contractual terms.

End User accepts the obligation to, on re-

quest, provide Ordnance Survey with infor-

mation on what products and/or services

containing and/or derived from the Li-

censed Products they produce.

Regarding audits

The rights of Tele Atlas as defined in this

Agreement apply as well for Ordnance Sur-

vey’s auditors’ and/or the National Audit Of-

fice in case of delivery of UK data. Any sum

payable shall be subject to interest at two per-

cent (2%) over the base rate from time to time

of National Westminster Bank plc from the

date this sum was originally due up to the

date of payment (whether before or after judg-

ment).

Ordnance Survey and/or the National Audit

Office shall have the right to audit End Users

books or accounts directly on exactly the

same terms as Licensee is so obliged in this

Agreement so that Ordnance Survey has this

right of audit in respect of any provider of pro-

ducts and/or services containing and/or de-

rived from Licensed Tele Atlas Products.

Licensee hereby agrees that in the event of dis-

covery of breach, the relevant End Users in

breach and Licensee shall be jointly and sever-

ally liable to Ordnance Survey.

8 Additional Provisions with respect to

the Norway Data only.

End User is prohibited from using the Tele

Atlas

MultiNet

data of Nor way to create

commercial general purpose printed or digital

maps, which are similar to the basic national

products of the Norwegian Mapping Authority.

9 Additional provisions for Tele Atlas

Premium Points of Interest (the “POIs”).

With respect to the POI Licensed Tele Atlas

Products:

(The following provisions only refer to the pro-

ducts which contain Tele Atlas

Premium

Points of Interest.)

End User specifically agrees that it shall not:

(a) except as otherwise specifically set forth

herein, license or otherwise provide the POI Li-

censed Tele Atlas Products to any third party

for the purposes of resale, sublicensing, redis-

tribution or for the purpose of compiling, en-

hancing, verifying, supplementing, adding to

or deleting from any mailing list, geographic

or trade directories, business directories, clas-

sified directories, classified advertising which

is sold, rented, published, furnished or in any

manner provided to a third party;

(b) make the POI Licensed Tele Atlas Products

available in an on-line environment unless

properly secured and/or encrypted to prevent

unauthorized access to the POI Licensed Tele

Atlas Products; and

either in whole or in part, as a factor in (i) es-

tablishing an individual’s eligibility for credit

or insurance; (ii) connection with underwriting

individual insurance; (iii) evaluating an indivi-

dual for employment or promotions, reassign-

ment or retention as an employee; (iv) in

connection with a determination of an indivi-

dual’s eligibility for a license or other benefit

granted by a governmental authority; or (v) for

soliciting survivors of deceased persons.

(d) create mailing or telemarketing lists unless

authorized in this Agreement.

(e) End User will house the POI Licensed Tele

Atlas Products on the Internet behind firewalls

and will implement a system of controls that

will (i) protect the integrity of the POI Licensed

Tele Atlas Products; (ii) control access to the

POI Licensed Tele Atlas Products and (iii) pre-

vent unauthorized usage or copying of the POI

Licensed Tele Atlas Products.

Engb

Chapter

Licence agreement

10 Additional provisions for Tele Atlas

Brand Icon Licensed Tele Atlas Product (the

“Brand Icon Licensed Tele Atlas Product”):

(The following provisions only refer to the pro-

ducts which contain Tele Atlas

Brand Icon Li-

censed Tele Atlas Product.)

a End User's use of the Brand Icon Licensed

Tele Atlas Product and any portion thereof,

is limited to use solely for the purpose of en-

hancing the value and/or use of the spatial

vector data furnished or made by Tele Atlas.

Notwithstanding anything to the contrary

herein, or in any attachment or exhibit here-

to, in no event shall End User use the

Brand Icon Licensed Tele Atlas Product or

any portion thereof in connection with or in

conjunction with spatial street vector data

furnished or made by a party other than

Tele Atlas. End User may only use the

icons, brand names, logos, trademarks or

other features within (and not separate

from) the map data. In addition, End User

shall not modify or alter the color, shape,

size, and orientation of the Brand Icon Li-

censed Tele Atlas Product as provided to

End User without Tele Atlas’s prior written

approval.

b Licensee agrees that the use of Brand Icon

Licensed Tele Atlas Product subject to the

terms and conditions set forth in this Agree-

ment and that there may be additional third

party terms, conditions and restrictions to

which the use of the Brand Icon Licensed

Tele Atlas Product will be subject provided

to the End User from time to time by Licen-

see in the release notes applicable to the

Value Added Product.

c Should End User enter into any commercial

arrangement for advertising, pay-for-place-

ment, promotion or any similar paid brand

marketing exposure with any owners (or

their representatives) of any of the brand

icons supplied with the Brand Icon Li-

censed Tele Atlas Product, Tele Atlas shall

receive no less than twenty five percent

(25%) of any revenues collected in the con-

text of any such commercial arrangement,

unless otherwise agreed-to in advance and

in writing by both parties.

11 Additional Provisions with respect to

Tele Atlas

3D Landmarks Licensed Tele

Atlas Product (the “3D Landmarks”):

(The following provisions only refer to the pro-

ducts which contain Tele Atlas

3D Landmarks

Licensed Tele Atlas Product.)

Licensee agrees to include as soon as practi-

cally possible, but no later than the first new

release of the Value Added Product following

Licensee’s receipt of any 3D Landmarks, any

landmarks on every Value Added Product and

in the “about box” of the Value Added Product.

Notwithstanding the aforementioned, Tele

Atlas has the right to decide, at its sole discre-

tion, to remove specific 3D Landmarks in sub-

sequent releases of the Licensed Tele Atlas

Products. In such case, Licensee will remove

those 3D Landmarks from the Value Added

Product as soon as practically possible, but

not later than the first new release of the Value

Added Product following Licensee’s receipt of

the Update to the Licensed Tele Atlas Product.

Tele Atlas shall not be held responsible for any

possible damages, costs or expenses incurred

by Licensee related to such removal of a 3D

Landmark by Tele Atlas from the Licensed Tele

Atlas Product or failure to remove a 3D Land-

mark by Licensee from the Value Added Pro-

duct.

12 Copyright Notices.

Licensee shall conspicuously display each ap-

plicable then current copyright notice for the

Licensed Tele Atlas Products on the initial

splash screen, in the code, on the storage

medium, on the packaging, in the “Help/

About” section, in the operator’s manual, and

in any displayed or printed map image, for

each Value Added Product that is based upon:

1 Tele Atlas

MultiNet

Europe. As of the Ef-

fective Date, the copyright notice is: “Data

tion, “based on”:

Engb

Chapter

Licence agreement

a Tele Atlas

MultiNet

data of Austria.As

of the Effective Date, the copyright no-

Tele Atlas

MultiNet

data of Denmark.

As of the Effective Date, the copyright

copyrights shall cause legal proceed-

ings.”

Tele Atlas

MultiNet

data of France.As

of the Effective Date, the copyright no-

Tele Atlas

MultiNet

data of the United

Kingdom (excluding Northern Ireland).As

of the Effective Date, the following ap-

plies: This product includes mapping

data licensed from Ordnance Survey

with the permission of the Controller of

Crown copyright and/or database right

ber 100026920.

Tele Atlas

MultiNet

data of Northern

Ireland. As of the Effective Date, the

Northern Ireland.”

Tele Atlas

MultiNet

data of Norway.As

of the Effective Date, the copyright no-

Mapsolutions.”

Tele Atlas

MultiNet

data of Russia: As

of the Effective Date, the copyright no-

Tele Atlas

MultiNet

data of Switzerland.

As of the Effective Date, the copyright

Tele Atlas

MultiNet

data of The Nether-

lands. As of the Effective Date, the copy-

right notice is: “Topografische

het kadaster en de openbare registers,

Apeldoorn 2006.”

13 Miscellaneous.

This is the exclusive and complete Agreement

between the Licensors and you regarding its

subject matter. Nothing in this Agreement

shall create a joint venture, partnership or

principal-agent relationship between the Li-

censors and you. Sections 2, 5 and 7 - 12 shall

survive the expiration or termination of this

Agreement. This Agreement may be amended,

altered, or modified only by PIONEER. You

may not assign any part of this Agreement

without PIONEER ’ prior written consent. You

acknowledge and understand that the Data

may be subject to restrictions on exportation

and agree to comply with any applicable ex-

port laws. In the event that any provision or

part of a provision of this Agreement is deter-

mined to be invalid, illegal, or unenforceable,

such provision or part thereof shall be stricken

from this Agreement and the remainder of this

Agreement shall be valid, legal, and enforce-

able to the maximum extent possible. Any no-

tice under this Agreement shall be delivered

by courier to PIONEER, Attention Legal

Department.

Engb

Chapter

Licence agreement

Licenses

Engb

Chapter

Licence agreement

Engb

Chapter

Licence agreement

Engb

Chapter

Licence agreement

Engb

Chapter

Licence agreement

Engb

Chapter

Licence agreement

About the data for the map

database

! Modifications related to roads, streets/high-

ways, terrain, construction and other things

before/during the development period may

not be reflected in this database. Inevitably,

those modifications after that period are

not reflected in this database.

! Regardless of existing and newly-built

things, the data may be different from the

actual condition.

! For details about the map coverage of this

navigation system, refer to the information

on our website.

! It is strictly prohibited to reproduce and use

any part or the whole of this map in any

form without permission from the copyright

owner.

! If the local traffic regulations or conditions

deviate from this data, follow the local traf-

fic regulations (such as signs, indications,

etc.) and conditions (such as construction,

weather, etc.).

! The traffic regulation data used in the map

database applies only to standard sized

passenger vehicles. Note that regulations

for larger vehicles, motorbikes, and other

non-standard vehicles are not included in

the database.

! Map Version, Tele Atlas. Rel. 06/2009.

! Powered by NNG

Engb

Chapter

About the database

The navigation system

upgrade process

1 Check the device number of your naviga-

tion system.

= For details of the operation, refer to

Checking the device number on this

page.

2 Check the version information.

= For details, refer to Checking the current

version on this page.

3 Get the password for authentication.

= For details, refer to Getting the password

for authentication on the next page.

4 Upgrade the software programme of your

navigation system.

= For details of the operation, refer to Up-

grading the software programme and the

map database on the next page.

5 Check whether the upgrade was done prop-

erly.

= For details, refer to Checking whether

the upgrade was done properly on page

22.

6 Update the Bluetooth firmware.

= For details, refer to Updating the Blue-

tooth wireless technology software on

page 23.

Preparation for upgrade

Checking the device number

First, check your device number

(DEVICE NUMBER, displayed such as

Device Number or Device#) of your navigation

system for later procedures. To display the de-

vice number, do the following.

1 Park your vehicle in a safe place and

apply the handbrake.

2 Insert the upgrade SD memory card

into the SD card slot.

3 Turn the ignition switch OFF and back

ON to reboot the navigation system.

After a short pause, the device number will ap-

pear.

4 Write down your device number

(Device#) onto the supplied Media Number

Card (MEDIA NUMBER CARD) to avoid mis-

takes.

5 Touch [Cancel].

The navigation system restarts.

6 Turn off the vehicle engine to termi-

nate the system.

The navigation system is also turned off.

7 Eject the upgrade SD memory card.

Checking the current version

You may need the version information to con-

firm completion of upgrade. Check the version

information using the following procedure.

1 Press the MENU button to display the

“Top Menu”, and then touch [Settings].

2 Touch [System Settings].

The “System Settings” menu appears.

3 Touch [Service Information] on the

“System Settings” menu.

4 Write down the version displayed in

“Map Version” and “Version”.

Engb

Chapter

Instructions for upgrading

Page is loading ...

Pioneer CNSD 250 FM Operating instructions

Brand: Pioneer

Model: CNSD 250 FM

Category: Car navigation systems

Type: Operating instructions

This manual is also suitable for

CNSD 200 FM

Download PDF

report

Pioneer CNSD 250 FM Operating instructions

This manual is also suitable for

Pioneer CNSD 250 FM Operating instructions

Related papers