Owner's Manual
CRRFTSMnNo
TRAC PACK
Model No. 486.24635
CAUTION:
Before using this product,
read this manual and follow
all Safety Rules and
Operating Instructions.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
PRINTED IN U.S.A.
SAFETY RULES ....................................................... 2
FULL SIZE HARDWARE CHART ...........................! 3
CARTON CONTENTS ........................................ i,..3
ASSEMBLY ......;..._..:.............;., ............. :.................. 4
OPERATION ......................................................... .... 5
MAINTENANCE/STORAGE ..................................... 5
REPAIR PARTS ILLUSTRATION ........................... 6
REPAIR PARTS LIST ............................................... 6
SLOPE GUIDE .......................................................... 7
PARTS ORDERING/SERVICE ................. Back Page
LIMITED ONE YEAR WARRANTY ON
Forone year fromthe date ofpurchase,when this Trac Pack is maintainedand lubricatedaccordingtothe operating
and maintenance instructionsin the owner'smanual, Sears willrepair any defect in materialor workmanshipfree of
charge. Ifthis Trac Pack is used for commercialor rental purposes,thiswarrantyapplies for only90 daysfrom the
date ofpurchase.
Thiswarrantydoes notcover repairs r_cessary because of operatornegligence or abuse, includingthe failure to
m;dntainthe equipmentaccordingto instructionscontained in the owner'smanual.
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPART-
MENT IN THE UNITED STATES.
Thiswarrantyapplies only whilethis productis in the United States.
This warrantygives you specificlegal rights,and you may also have other dghtswhichvary from state tostate.
Seam, Roebuck and Co. D/817 WA. HoffmanEstates, Chicago, IL 60179
Any power equipmentcancause injuryif operated improperlyor ifthe user does notunderstandhow to operatethe
equipment.Exercise cautionat alltimes, when using powerequipment.
• Read this owners manual before attempting to
assemble or operatethespreader.
• Do notallowanyoneto rideon or siton Trac Pack
attachment.
• Never allowchildrentooperate the tractor.
Beforeoperatingvehicle on any grade(hill)refer to
thesafety rules inthe vehicleowner'smanualcon-
cemingsafe operationon slopes. Refer also tothe
slopeguide on page 7 ofthis manual. Stay off steep
slopes!
,_ Look for this symbol to point out important safety precautions. It mean--Attantlonll
Become alertf! Your safety Is Involved.
486.24635The modelnumber and serial numberswillbe found on a
decal attached to the hitchbracket.
You shouldrecord beth the serial number and the date of
purchaseand keep in a safe place for futurereference.
MODEL NUMBER:
SERIAL NUMBER:
DATE OF PURCHASE:
L
D
HARDWARE SHOWN FULL SIZE
©
E
J F
J
)
G
J
H
Ref. Qty. Description
No.
A 2 Shoulder Bolt
B 2 3/8" x 1" Hex Bolt
C 6 5/16" x 3/4' Hex Bolt
D 6 5/16" Hex Lock Nut
Ref, Qty.
No.
Description
E 4
F 2
G 1
H 3
3/8" Flanged Lock Nut
Bushing
Clevis Pin
1/8" Hairpin Clip
1
/
2
3
CARTON CONTENTS
1. Tool Box
2. Mounting Bracket, Left Hand
3. Mounting Bracket, Right Hand
4. Brace Strap
5. Hitch Bracket
TOOLS REQUIRED FOR ASSEMBLY
(1) 3/4" Wrench or Adiustable Wrench
(1) 11/16' Wrench or Adjustable Wrench
(1) 5/8" Wrench or Adjustable Wrench
(2) 9/16" Wrenches or Adjustable Wrenches
(2) 1/2" Wrenches or Adjustable Wrenches
• Remove the hardware pack and all parts from the
carton. Be sure the carton is empty before discard-
ing,
• Lay out ell parts and hardware as shown on page 3.
FOR TRACTORS RESEMBUNG FIGURE 1:
• Remove the boltfrom the holeon each side ofthe
tractorframe as shownin figure 1.
• Assemblethe twoshoulderboltsto the now empty
holes.Tighten. See figure 1,
SHOULDER BOLT
FIGURE 1
FOR TRACTORS RESEMBLING FIGURE 2:
• Remove the boltand nutfrom the holeon each side
ofthe tractorframe as shownin figure 3,
• Assembletwoshoulder boltsand 3/8"flanged lock
nutsto the now empty holes.Tighten. See figure3.
SHOULDERBOLT
,3/6.FLANGED
_LOCKNUT
FIGURE 3
• Assemblethe rightand leftmountingbracketstothe
hitchbracket usingfour5/18' x 3/4" hex bolts and
5/16" hex locknuts, Do not tighten yet. See figure4,
LEFTHAND
MOUNTINGBRACKET_J _14a.Mm,,
RIGHTHAND _ J 5/16"x 3/4"
MOUNTINGBRACKET_ 1.7 HE)(BOLT
FIGURE 4
Assemble the righthandand lefthand mounting
bracketstothe hitchbracket usingfour 5/16" x 3/4"
hex bolts and 5/16" hex locknuts.Do not tighten
yet. See figure 2.
LEFTHAND
MOUNTING _ 5/16. HE)(
HITCHBRACKET dl . / 5/16. x 3/4"
7 L/ HEXBOLT
RIGHTHAND
MOUNTING
BRACKET
FIGURE 2
FOR BOTH TYPES OF TRACTORS
• Assemblethe brace strapto the mountingbrackets
usingtwo 5/16' x 3/4" he:<bolts and 5/16" hex lock
nuts. Do not tighten yet. See figure 5.
• Assembletwo3/8" x 1• hax bolts, bushingsand 3/8"
flangedlock nutsto the slotsin the hitchbracket. Do
not tighten yet. See figure 5.
5/6. x 1" 5/16"x3/4"
HE)(BOLT_,_tl HEXBOLT
BRACESTRAP __*
FIGURE 5
4
• Place the looselyassembledframe ontothe rear of
the b'actor,hookingthe notched ends ofthe mounting
brackets under the shoulderbolts,Attachthe hitch
bracketto the tractorhitchusingthe clevis pinand a
1/8" hairpinclip. See figure6.
• Alignthe frame so thatit isstraightand level withthe
tractor. Tighten thefour 5/16" x 3/4" hex bolts
(assembled infigure 4) whichfastenthe mounting
bracketsto the hitchbracket.
• Slide the 3/8" x 1" hex boltsalong the hitchbracket
slots untilthey are bumped upagainstthe backedge
ofthe tractorhitch.Tighten. See figure 6.
• Place the toolbox ontothe frame sothatthe heads
ofthe shoulder boltsin the bottom ofthe toolboxfit
down intothe keyholeslots. Slidethetool box
forward,slightlytiltingup the backend, untilthe
clevis pinsinthe bottomofthe tool box dropdown
intothe holesat the rear of theframe. Secure thetool
box tothe frame with two 1/8" hairpinclipsthrough
the clevis pins. See figure7.
• Tighten the two bolts(assembledin figure 5) which
fasten the brace strap tothe mountingbrackets.The
strap keepsthe frame at the correctalignmentwidth
when removingand reattachingthe frame and thetool
box.
3/8" x 1"
HEXBOLT'-----. I I
I I t SHOULDER
BOLT
F 6
[o]"J=1: ,JIII
&
CAUTION: Vehicle braking and stability
may be affected with the addition of an
accessory or en attachment. Be aware of
changing conditions on slopes.
• Engage the tractor clutch smoothly whert starting
the tractor in motion. Sudden, fullthrottle starts
could cause the front end of the tractor to lift off the
ground, causing loss of steering control.
• Fill the Trac Pack with up to 100 pounds of material
or tools.
• Do Not exceed the 100 poundweight capacity of
the Trec Pack.
• To remove the tool box from the Trac Pack frame,
'remove the 1/8" hairpin clips from the two clevis pin
in the bottom ofthe tool box. Lift up the rear ofthe
tool box enough to raise the pins o,t ofthe frame
end then pull back and up tO remove the heads of
the shoulder bolts from the slots in the frame.
• To remove the Trac Pack frame from the tractor,
remove the 1/8" hairpin clip end the clevis pinfrom
the hitch bracket. Unhook the frame from the
shoulder boltson the sides of the tractor and
remove the frame. The shoulder boltsmay be left
permanently attached.
• Rinse or wipe off the Trac Pack after each use.
• Do not store with material in the tool box.
• Store inside in a clean, dry area.
REPAIR PARTS FOR MODEL 486.24635
9
19 16
\
15
/ 14
/
16
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
PART QTY,
NO.
47492 1
47493 1
47525 2
44044 2
43013 4
43088 4
43070 2
738-0255 2
46556 2
24560 1
24559 1
DESCRIPTION REF. PART
NO. NO.
Tool BOX 12 24567
Tool Box Lid 13 24561
Hex Bolt, 1/4-20 x 4-1/2" Lg. 14 738-0234
Clevis Pin, 3/8" x 3/4" Lg. 15 47572
Hex Lock Nut, 1/4-20 Thd. 16 43182
Washer, 1/4= 17 43064
Washer, 3/8" 18 43343
Shoulder Bolt, 1/4-20 x .36" Lg. 19 711-0309
IPush Nut, 3/8" 20 43001
Mounting Bracket, Right Hand 21 23625
i Mounting Bracket, Left Hand 47494
QTY. DESCRIPTION
1 Brace Strap
1 Hitch Bracket
2 Shoulder Bolt,3/8-16 x 5/8" Lg.
4 Hex LockNut, Flanged3/8-16 Thd.
6 Hex Bolt, 5/16-18 x 3/4" Lg.
6 Hex Lock Nut, 5/16-18 Thd.
3 Hairpin Clip, 1/8" (#4)
1 Clevis Pin, 5/8" x 1.2' Lg.
2 Hex Bolt, 3/8-16 x 1"Lg.
2 Bushing, Pivot
1 Owners Manual
9rmc
• G$
"M
I
10•
j CAOT,ON:O°n o tey°ur orw' T Pa °ns'° in1 1
excess of 10 degrees. Operate up and downslopes, neveracmes the
face ofslopes.Avoidsuddenturnsor maneuvers.
For in-home majorbrand repair service:
Call 24 hours a day, 7 days a week
1-800-4-MY-HOME (1-800-469-4663)
Para pedir servicio de reparaci6n a domicilio- 1-800-676-5811
In Canada for all your service and parts needs call
- 1-600-665-4455
Au Canada pour tout le service ou les pibces
For the repair or replacement parts you need:
Call 7 am - 7 pm, 7 days a weel_
1-800-366-PART (1-800-366-7278)
Para ordenar piezas con entrega a domicilio - 1-800-659-7084
For the location of a Sears Parts and Repair Center in your area:
Call 24 hoursa day, 7 days a week
1-800-488-1222
For information on purchasing a Sears Maintenance Agreement
or to inquire about an existing Agreement:
Call 9 am - 5 pm, Monday - Saturday
1-800-827-6655
TheServiceSideofSears"
PRINTED IN US.A, FORM NO. 47494
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Craftsman 486241322 Owner's manual
-
-
-
Craftsman 486.242112 User manual
-
-
-
Craftsman 48624372 Owner's manual
-
-
-