LG N2A2DF2 User manual

This Owner’s manual is copyrighted by [LG Electronics Inc.].

The copy or use of this Owner’s manual, part or whole, without prior consent by [LG Electronics Inc.] is prohibited.

Thank you very much for using products of LG Electronics.

Before using, please read ‘the notice for safety’ carefully and use the products properly.

About LG Network Storage

Freedom to use anytime, anywhere

Thank you for purchasing LG Network Storage.

You can easily save and share ﬁles when and wherever

you have internet access with LG Network Storage.

2

3

About LG Network Storage

3

4

Safety warning

Caution

Do not place any objects within 15cm of the unit.

The unit reaches high temperatures creating the risk of burn injuries.

When dealing with system components, strictly abide by the instruction manual. Physical contact with the

soldering on the backside of components may cause severe injury.

Only use compatible devices with the system ports, or the system and devices risk being damaged.

Related to damage to the HDD and data:

- during installation or disconnection of the system, ensure that the system does not experience any

external physical shocks.

- During the operation of the HDD, short surges and stoppages of power may cause the system to turn off

and on quickly.

- there may be a sudden stoppage of electricity during operation

- avoid moving the system during operation of the HDD, which may cause external physical shock

- during the conﬁguration of new volumes.

i) if during use, existing volumes are deleted and new volumes are created, data will be lost.

ii) Before conﬁguration of new volumes, each user must back up data, as well as when creating new

volumes, to ensure the possibility of restoration.

– e.g. virus infections.

Always back up hard disk data to avoid accidental data loss.

In the event of the administrator forgetting the password, restoration is impossible. Hence safeguard the

password.

Do not use damaged disks. Product can be damaged.

Do not dismantle or change the structure of the system in any way. This may cause electric shock.

In the event of the cover being removed during operation, the user risks electric shock, injury, and damage

to the system.

When transporting the system, ﬁrst turn off the system and disconnect the unit from the power source.

Sudden tension in cables can cause severe damage to the system. Loose cables can cause injury.

Take caution when handling the system so as not to corrupt the hard disk data.

- Take caution not to bump or expose the system to extreme temperatures, as it may damage the sensitive

hard disk.

- Take caution when turning on the electricity, as during this time any external bumps to the system may

corrupt the hard disk data.

- The manufacturer disclaims all responsibility for loss of hard disk data.

1

5

2

8

9

3

4

10

6

7

※

To create a new password, the system must be re-initialized. In this case, all data will be lost, and data

recovery will be impossible, for security reasons. The manufacturer disclaims all responsibility in the event

of this occurrence.

5

Safety warning

Do not use damaged electrical cords. This may cause electric shock, and is a ﬁre hazard.

Always check and use correct voltage to avoid electric shock, severe damage to the system, and ﬁre.

Ensure that electrical cords are correctly plugged into the sockets to avoid ﬁre.

Ensure that electrical cords are not damaged or do not have heavy objects placed on them. Keep electrical

cords away from children and pets. Damaged cords may cause electrical shock or ﬁre.

Do not handle the electrical cord with wet hands, as this may cause shock and injury.

When removing the plug from the socket, ensure that the plug is handled and not the cord. Otherwise this

may cause damage to the plug and even ﬁre.

1

5

2

8

9

Keep the power cords and sockets clean at all times to avoid ﬁre and electrical shock.

Do not block vents, as this will cause system damage.

Prior to cleaning the system, always disconnect the power, to avoid damage and electric shock.

In the event of lighting and thunderstorms, immediately physically disconnect the system from any power

source, to avoid damage to the system.

Keep the system away from direct sunlight to avoid overheating, and melting of the case, which may

eventuate in ﬁre and injury.

10

11

12

13

14

15

16

17

18

19

20

3

4

6

7

Do not disassemble the power supply, to avoid the danger of electric shock.

Keep children away from the system, as consuming any parts will cause serious injury. In the event of swal-

lowing any parts, such as screws, immediately seek medical treatment.

Ensure that there are no loose or exposed metallic objects inside the case, to avoid the danger of damage,

ﬁre and electric shock.

Ensure that multipoint power sockets are not overloaded, to avoid the danger of ﬁre and electric shock.

Ensure that cords are always neatly arranged and are not trapped under the system or other heavy objects.

When connecting and disconnecting the electrical cord, take care in handling the socket to avoid the

danger of electric shock.

Ensure that hands are never used, to avoid damaging the system and electric shock. Always use screw

drivers for work inside the system.

If you hear sound from power cord or adapter, unplug the power cord from the outlet immediately.

If water or foreign substances go into the adapter or inside of the products, unplug the power cord from the outlet.

If you drop or damage the system, unplug the power cord from the outlet.

If the system smokes or if you smell burning, stop using it and unplug the power cord from the outlet.

Warning

6

Table of contents

About LG Network Storage

Safety warning

Table of contents

Components and supported OS

Name of the product parts (N1T1/N1T3/N1A1 product)

Name of the product parts (N2A2 product)

Name of the product parts (N2R5/N2B5 product)

Product Installation

Network Storage installation (N1T1/N1T3/N1A1 Product)

Network Storage installation (N2A2 Product)

Network Storage installation

(N2R5/N2B5 Product)

Program Installation

LG Network Storage software installation CD

Network Storage set up

LG Network Storage Installation Wizard

NAS Detector

Connecting to Web Menu

NAS Monitor

File Uploading and Downloading

Network folder (Windows)

Network folder (Mac)

Network folder (Linux)

Remote Network Drive

File Explorer

FTP

Using Network Storage

Enjoying Multimedia on you PC

Sharing through Community Board

Enjoying Multimedia

Play through a Smartphone

Picture backup

Burning ﬁles with DVD/BD

Home Monitoring Camera

Family Cast

Account and user registration

Access service with a PC

Accessing from TV

Signing up from the TV

LCD Panel and Buttons (N2R5/N2B5 Product)

Using external HDD (N1T1/N1T3/N1A1 Product)

Using External ODD (N1T1 Product)

Using Advanced Features

Torrent

Network Printer

Home Screen setup

Main Screen setup

Favorites setup

Favorites Mode

LG Network Storage Introduction

02-03

04-05

06-07

08

09-10

11

12

14

15

16

17-18

19-21

22

23

24

26-27

28

29

30

31

32-34

35

36

37-3 8

39-40

41

42

43

44

45-47

48-51

52

53

54

55

56-57

59

60

Installing LG Network Storage

LG Network Storage Add-ons setup

Using LG Network Storage

(N1T1/N1T3/N2R5/N2B5 Product)

(LG My Data)

7

Table of contents

System Setting

Brightness and Sound Setting

Managing Power

Language Setting

Time setup

Mail Notiﬁcation Service

Viewing System Information

System Initialization

DLNA Setup

iTunes Service Setup

Torrent Setup

Backup Setup

Rsync Setup (N2R5/N2B5 Product)

USB Backup Setup

Schedule Backup Setup

Backup Button Setup

USB Backup Mode (N2R5/N2B5 Product)

ODD Backup Mode (N2R5/N2B5 Product)

Time Machine Setup

Selective Mirror

Updating Firmware

Method to set up a network sharing device

Home Monitoring Camera Port Setup

Volume & RAID

A guide to using port number in

LG Network Storage

Open source software information

79

80

81

82

83

84

85

86-87

88

89-90

91

92

93

94

95

96

97-99

100

101-102

103

Setting up Account and Access

Requesting Account

Approving Account Request

My Information Setting

Managing Users

Managing Groups

Managing Share Folder

Network Setup

Setting Host Name

Setting up LAN

DDNS Setup

UPnP Port Forwarding Setup

Network Folder Setup

Windows Networking

Mac Networking

Unix/Linux Networking

Advanced Network Setup

File Server(FTP) Setup

Web Server Setup

Managing Hard Disk

Volume Setup

External Hard Drive

(N1T1/N1T3/N1A1 Product)

61

62

63

64-65

66-67

68

69

70

71

72

73

74

75

76-77

78

When you cannot set up automatic network sharing

device (UPnP setting) on DDNS set-up.

It’s a symbol for functions with difﬁcult set up.

This is recommended for experienced and advanced users that are familiar with advanced network

settings and routers.

Supplement

8

Please check the components before installing.

LG Network Storage Introduction

l Components and supported OS

Support OS

Components

- Windows XP SP3, Windows Vista, Windows 7

- MAC OS X 10.5 or higher

- Linux(Ubuntu 10.10 or higher, Fedora 14 or higher, OpenSuse 11.4 or higher)

※

Refer to quick install guide for component details.

Pictures or photographs used in the user manual are subject to change in accor-

dance with the components of the model.

Components may be changed upon the situation of the company.

Network Storage

PC S/W InstallerProduct Warranty

Power supply cord

and adaptor

Quick Installation Guide

LAN cable

PC S/W

NAS Detector

NAS Monitor

Nero BackItUp & Burn

Support OS

Windows XP, Server 2003, Vista, Mac OS 10.x or higher, Windows 7

Windows XP, Server 2003, Vista, Windows 7

Acrobat Reader

Flash Player

Installation Wizard

Remote Network Drive

Windows, Mac

Windows XP(SP2 or higher), Vista, Windows 7

Windows, Mac

Windows XP(SP3 or higher), Server 2003, Vista, Windows 7

9

LG Network Storage Introduction

l Name of the product parts (N1T1/N1T3/N1A1 product)

(Front)

ODD Slot hole : You should insert the disc having the writing side as a data side.

Pedestal

Back-up button : A button to back-up data of a disc or USB onto NAS.

ODD eject button

LED panel

:LAN :POWER:HDD :ODD :USB

N1A1N1T1 N1T3

10

Adaptor cable holder

Kensington Lock

Fan

Power button

Mode changing switch

USB 2.0 port

LAN port

DC-in

(Back)

EX. HDD MODE USB Mini-B Port

Air ventilation hole

LG Network Storage Introduction

l Name of the product parts (N1T1/N1T3/N1A1 product)

N1T1 N1A1 N1T3

11

(Front)

(Back)

LED panel

USB 2.0 port

Back-up button

USB 2.0 port

LAN port

DC-in

Adaptor cable holder

Kensington Lock

Power button

Fan

:LAN:HDD :POWER

LG Network Storage Introduction

l Name of the product parts (N2A2 product)

12

LCD Panel

Power button

SET (S) button : Selects mode.

Arrow button(

←,→

) : Navigates menu, moves cursor for IP settings Mode button : changes mode

Memory card Current state display LED

LED panel

Blu-ray/DVD Drive

USB 2.0 port

Disc Open

button

11

USB 2.0 port

12

LAN port

13

e-SATA : External SATA II device support

14

DC-in

15

Adaptor cable holder

Kensington Lock

Fan

LG Network Storage Introduction

l Name of the product parts (N2R5/N2B5 product)

(Front) (Back)

15

11

12

13

14

Installing LG Network Storage

This is the preparation process before using Network Storage.

Please follow the installation steps.

14

1

-

1. 제품 소개

제품구성물 및 지원 OS

1. Connect LAN port of Network Storage with LAN port of a network equipment

(IP network sharing device / router / hub / switch) using a LAN cable enclosed,

or directly connect the LAN port of the PC.

[N1T1/N1T3/N1A1]

2. Check to see if it is set to NAS mode.

※

3. After checking the connection of the power supply cable of LG Network Storage,

press the power button at the back and start LG Network Storage.

The booting will take about 40 sec. ~ 1 min. and alert

you with a sound.

(The LED will turn on with proper connection.)

Product Installation

l Network Storage installation (N1T1/N1T3/N1A1 Product)

network sharing device

(Shapes may vary depending on the

network sharing device.)

*

Network Storage

*

For the N1T3 model, if the EX. HDD MODE USB Mini-B port and PC is not

connected it is in NAS mode.

N1T1/N1A1

N1T3

15

2

-

3. 모드 스위치

외장형 HDD 사용하기 (N1T1 제품)

2. After checking the connection of the power supply cable of LG Network Storage,

press the power button at the back and start LG Network Storage.

The booting will take about 40 sec. ~ 1 min. and alert

you with a sound.

(The LED will turn on with proper connection.)

[N2A2]

1. Connect LAN port of Network Storage with LAN port of a network equip-

ment (IP network sharing device / router / hub / switch) using a LAN cable

enclosed, or directly connect the LAN port of the PC.

Product Installation

l Network Storage installation (N2A2 Product)

network sharing device

(Shapes may vary depending on the

network sharing device.)

*

Network Storage

*

N2A2

16

2. After checking the connection of the power supply cable of

LG Network Storage, press the power button at the back and

start LG Network Storage.

The booting will take about 40 sec. ~ 1 min. and alert you

with a sound.

(The LED will turn on with proper connection.)

[N2R5/N2B5]

1. Connect LAN port of Network Storage with LAN port of a network equip-

ment (IP network sharing device / router / hub / switch) using a LAN cable

enclosed, or directly connect the LAN port of the PC.

Product Installation

l Network Storage installation (N2R5/N2B5 Product)

network sharing device

(Shapes may vary depending on the

network sharing device.)

*

Network Storage

*

N2R5/N2B5

17

Included CD “LG Network Storage PC Software Installer” provides the following

programs.

2. NAS Monitor

3. Nero Backitup&Burn

4. NAS Detector

Provides a function of easily and quickly ﬁnding LG Network Storage present on

the user’s network.

5. Remote Network Drive

Remote Network Drive allows you to use the network folder anywhere, as if you are

in your home, through the Window Explorer.

Provides a function of checking the state of LG Network Storage in real time as

well as a simple control.

Software that protects and stores data for backup and restoration.

1. LG NAS Installation Wizard

Program that helps you to set up network which is complicated to do without

in an easy way.

Program

Windows Mac Linux

Flash Player

Acrobat Reader

NAS Detector

NAS Monitor

Nero backitup&burn

LG NAS Installation Wizard

Remote Network Drive

Supporting operating system

Software supporting OS

Program Installation

l LG Network Storage software installation CD

18

1. Insert “LG Network Storage PC Software Installer”

CD that is provided with the system into an optical drive (CD/DVD drive) of the user’s PC.

2. A pop-up as below appears due to automatic operation.

You should not put in‘Network

Storage’.

※

For detailed instructions on using Nero BackItUp & Burn, refer to the manual

within the program after installation.

To install NAS Monitor, Nero BackItUp & Burn program click each button.

Click on the icon if a ﬂash player is not installed on the PC

※

Install ‘Installation Wizard’ for Windows users.

It will make Network Storage setup easy.

Install ‘NAS Detector’ for Mac users.

If you click the ‘User Manual’ button, you can download the user

manual in various languages through the web.

Program Installation

l LG Network Storage software installation CD

If you want to install Remote Network Drive, click the Remote Network Drive button.

※

19

If Network Storage doesn’t

appear, recheck the connec-

tion and click ‘Search network

button’.

※

Helps to easily set up Network Storage and complicated networks (DDNS, Port

Forwarding).

A

After running Installation Wizard, choose the router currently connected to Network

Storage and click ‘Next’

Click ‘Next’

After checking the content

click ‘Next’.

Create short cut icon on the

desktop by clicking ‘web menu’

Create short cut icon on the

desktop by clicking ‘Network

Folder’.

※ Compatible with only Windows OS. Use NAS Detector for Mac OS.

B

A

Network Storage set up

l LG Network Storage Installation Wizard

20

Enter the name and password of

the domain you would like to use.

Choose the model for your

Network Storage.

Select the item that tests for

external connections.

After entering the password for

Network Storage administrator,

click ‘Ok’. Default Administrator

password is ‘admin’.

Click ‘Next’.

After checking the results click

‘Next’.

Network Storage set up is

complete. Click ‘Exit’ and enjoy

various features on Network

Storage.

Click ‘Next’.

I

J

Enter the domain name without

special characters and spaces.

(English and digits only)

If the connection fails,

move to and continue

installation.

※

K

L

G

F

Network Storage set up

l LG Network Storage Installation Wizard

Page is loading ...

LG N2A2DF2 User manual

LG N2A2DF2 User manual

Related papers

Other documents