Moen DN4908BK Installation guide

Moen
Brand
Moen
Model
DN4908BK
Category
Wall & ceiling mounts accessories
Type
Installation guide

This manual is also suitable for

Moen DN4908BK is a toilet paper holder designed to provide a convenient and stylish solution for your bathroom storage needs. Constructed of wrought iron with a black powder-coated finish, this holder ensures durability and resistance to corrosion. Its compact dimensions of 2.30 inches in width and 3.80 inches in height make it suitable for installation in various spaces. The holder features a depth of 3.50 inches from the front to the wall, providing ample space for standard-sized toilet paper rolls.

Moen DN4908BK is a toilet paper holder designed to provide a convenient and stylish solution for your bathroom storage needs. Constructed of wrought iron with a black powder-coated finish, this holder ensures durability and resistance to corrosion. Its compact dimensions of 2.30 inches in width and 3.80 inches in height make it suitable for installation in various spaces. The holder features a depth of 3.50 inches from the front to the wall, providing ample space for standard-sized toilet paper rolls.

25300 AL MOEN DRIVE NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379-2720
WWW.MOEN.COM
Copyright Creative Specialties International
Paper Holder is constructed of
wrought iron. Black finish is powder
coated. Natural finish is painted and
has an acrylic coating for added
protection.
DN4908BK – Paper Holder
Black Finish
Cleaning Instructions:
Stock Number:________________Toilet Paper Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
Sienna® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1077
2.30 IN
3.50 IN DEEP
FROM FRONT
OF TP HOLDER
TO WALL
3.80 IN
1. Remove the mounting bracket from the body by loosening the setscrew.
2. Position the assembled unit on the wall where desired.
3. Lightly mark the outline of each base.
4. Center a mounting bracket within each base outline with “UP” facing you.
5. Mark the 2 small hole locations of each mounting bracket.
6. Drill a 5/16” hole at each mounting bracket hole location.
7. Fold ends of the plastic toggle together and insert into each 5/16” hole.
8. Tap anchor flush to the wall.
9. Insert plastic pin into anchor and lightly tap to expand anchor open. (Do not
force or hammer pin)
10. Remove pin from anchor.
11. Place each mounting bracket over the wall anchors, lining up the holes.
12. Insert a screw through the mounting bracket slots into each wall anchor until
tight. Do not over tighten.
13. Place product over the mounting bracket. Check and make sure that the base
set screw hole is facing down.
14. Assemble the set screw to the base. Use the hex wrench included in hardware
kit to tighten the set screw and secure the assembly to the mounting bracket.
  • Page 1 1

Moen DN4908BK Installation guide

Moen
Brand
Moen
Model
DN4908BK
Category
Wall & ceiling mounts accessories
Type
Installation guide
This manual is also suitable for

Moen DN4908BK is a toilet paper holder designed to provide a convenient and stylish solution for your bathroom storage needs. Constructed of wrought iron with a black powder-coated finish, this holder ensures durability and resistance to corrosion. Its compact dimensions of 2.30 inches in width and 3.80 inches in height make it suitable for installation in various spaces. The holder features a depth of 3.50 inches from the front to the wall, providing ample space for standard-sized toilet paper rolls.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers