LXGo™ QRG EN
2
Guide
The LXGo™ Quick Reference Guide (QRG) has basic product information.
Download the User Manual from www.chauvetlighting.com
The LX Go™ is a DMX controller product. This product is intended to be
used for control over other DMX-
compatible products. The LX Go™ gives
the user the ability to record, play
back, and program custom and static
looks using DMX.
• Rugged and compact DMX recorder and playback device
• Record and playback up to 12 hours of cues on 1 universe of DMX
• Trigger cues and pre-programmed effects with included LX Go™
Infrared Remote Control (IRC)
• Schedule playback for specific times on specific days of the week
•
Locking 5-pin DMX in/out and IEC connector
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit www.chauvetlighting.com
Included
• Hanging Bracket
Control
Description
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Refer to the menu map in the User Manual to understand the menu options.
The menu map shows the main level and a variable number of
programming levels for each option.
The LXGo™ uses a regular DMX data connection for its DMX
personalities: RGB, RGBW, and RGBWA. See the User Manual to
connect and configure for DMX operation.
1. Disconnect the product from the power outlet.
2. Using a flat-head screwdriver, wedge the tip into the slot of the
fuse holder.
3. Pry the safety cap out of the housing to pull out the installed fuse.
4. Remove the blown fuse from the safety cap and replace with a fuse
of the exact same type and rating (T 500mA, 250 V).
5. Insert the fuse holder back in place and reconnect the power.