3
Set up the OneTouch feature
1. Push the button on the front of your drive.
The Retrospect Express HD registration
screen will appear.
2. Complete the registration form.
Note: In order to register, you must be
connected to the internet.
3. After you complete the registration, the
Retrospect Express HD welcome screen
will appear, displaying the automated backup
settings for your computer.
You may back up your computer immediately
by clicking
Back up now, let Retrospect
Express HD do it automatically at the next
scheduled backup time, or do it at any time
by pressing the button on the front of your
drive or clicking
Back up now.
Your installation is complete!
1
Insert the Install CD into your
CD-ROM drive
To install the Maxtor OneTouch II software
and EMC
®
Dantz
®
Retrospect
®
Express HD:
1. Insert the Install CD.
2. Wait for the Maxtor
screen to appear
.
3. Follow the on-screen instructions to install
the software. For details, refer to Chapter 2
in the User’s Guide, on the Install CD.
4. After completing installation, eject the CD.
Do not remove the CD until all steps of the
installation are complete.
USB
FW
www.maxtor.com
Installation Software
Maxtor OneTouch
™
II
Includes:
•
EMC Dantz
®
Retrospect
®
Express HD (Win)
• EMC Dantz Retrospect
E
xpress (Mac)
•Maxtor OneTouch Drivers
•Maxtor OneTouch Utility
©
2
0
0
5
M
a
x
t
o
r
C
o
r
p
o
r
a
t
i
o
n
a
n
d
i
t
s
L
i
c
e
n
s
o
r
s
.
M
a
x
t
o
r
a
n
d
t
h
e
s
t
y
l
i
z
e
d
M
a
x
t
o
r
l
o
g
o
a
r
e
r
e
g
i
s
t
e
r
e
d
t
r
a
d
e
m
a
r
k
s
,
a
n
d
M
a
x
t
o
r
O
n
e
T
o
u
c
h
i
s
a
t
r
a
d
e
m
a
r
k
,
o
f
M
a
x
t
o
r
C
o
r
p
o
r
a
t
i
o
n
.
D
a
n
t
z
a
n
d
R
e
t
r
o
s
p
e
c
t
a
r
e
r
e
g
i
s
t
e
r
e
d
t
r
a
d
e
m
a
r
k
s
o
f
E
M
C
C
o
r
p
o
r
a
t
i
o
n
.
U
.
S
.
p
a
t
e
n
t
s
5
,
1
5
0
,
4
7
3
a
n
d
5
,
9
6
6
,
7
3
0
.
O
t
h
e
r
p
a
t
e
n
t
s
p
e
n
d
i
n
g
.
O
t
h
e
r
t
r
a
d
e
m
a
r
k
s
a
r
e
t
h
e
p
r
o
p
e
r
t
y
o
f
t
h
e
i
r
r
e
s
p
e
c
t
i
v
e
h
o
l
d
e
r
s
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
5
/
0
5
P
N
:
2
0
2
7
9
9
0
0
WINDOWS
English
Français
Deutsch
Español
Italiano
MACINTOSH
English
Français
Deutsch
Logiciel d’installation • Installationssoftware
Software di installazione • Software de instalación
•Installatiesoftw are
Installationsprogram • Asennusohjelma
Software de Instalação
*Only one interface port (FireWire 800, FireWire 400, or USB) can be used
to connect the Maxtor OneTouch drive to your computer.
2
Connect the drive to your computer*
Plug in the power adapter, turn the power switch
on and plug in either the FireWire or the USB cable
(depending on which port your computer has). For
details, refer to the Connecting the Drive section
in Chapter 2 of the User’s Guide.
Allow up to 2 minutes for your computer to recognize the drive.
This Installation describes the Full Installation with EMC Dantz
Retrospect Express HD. If you wish to install your drive without
EMC Dantz Retrospect Express HD, choose the ‘Install Drivers’
option to install the Maxtor software only. For more information, go
to Chapter 2 of the User’s Guide on the Install CD. The Maxtor
OneTouch feature will not work unless you install EMC Dantz
Retrospect Express HD.
I
f you did not install Retrospect Express HD, you may
skip this step.
The Maxtor OneTouch II FireWire 800 drive is
shipped with a Macintosh file format. Windows XP
and Windows 2000 operating systems use an NTFS
file structure. Your drive must be re-formatted
with NTFS to run on Windows.
The
Format Drive window will appear giving you
the opportunity to format your drive with the NTFS
file format. Click
Format.
Windows 2000 and XP
You must have Administrative Privileges. Refer to chapter 2
of the User’s Guide on the Install CD for more information.
Maxtor OneTouch
™
II Drive, FireWire 800 Edition
Windows 2000 and Windows XP
For more detailed information, please refer to the Users Guide located on the Install CD (also available at www.maxtor.com).
Maxtor OneTouch
Button
QUICK START GUIDE
A FireWire 800 adapter card is required for full FireWire 800 speed.
FireWire 400 (1394a) USB (2.0 or 1.1)
To restore your Windows system
Note: The drive MUST be disconnected from the system during the
OS installation.
1. Prepare your internal hard drive.
Partition, if necessary, and format.
Note: Do not partition or reformat the Maxtor OneTouch II FireWire 800
drive that your system is stored on.
2. Install your operating system.
The following services packs need to be installed:
• Windows XP: Service Pack 1 or later.
• Windows 2000: Service Pack 3 or later.
Microsoft Internet Explorer 5.01 or later is required for all Windows
operating systems.
3. Re-install the Maxtor OneTouch II software including Retrospect
Express HD.
4. Open Retrospect Express HD
.
5. Set up the Restore.
Click
Restore.
A calendar window will appear showing all of your restore points.
6. Select your restore point.
Click the restore point that you wish to restore and click Next.
Note: For more information about restore points and using
Retrospect Express HD, see ‘Using Retrospect Express HD’
in chapter 3 of the User’s Guide on the Install CD.
You are now asked which files and folders you would like to restore.
7. Select your entire computer for restore.
Place a check next to
My Computer and click Next.
8. Select the location of your restore.
You will now select where you want to restore your files.
Select
To Their Original Location On, to restore them to the exact
location from which they were originally copied.
Note: All data will be replaced at the location you have chosen to
restore with the files and folders you have chosen to restore.
9. Start the Restore.
Click
Restore.
Retrospect Express HD will start restoring files on your computer.
A status bar will show the progress until the restore is finished.
10. Exit Retrospect Express HD.
If your system restore was successful, you can exit Retrospect
Express HD. Click the
red ‘X’ in the upper right corner of the window.
11. Finishing the restore.
Restart your computer.
Your system may require more than one restart.
Follow any additional on-screen instructions, if
necessary, to complete your system restore.
Restoring your System
Windows 2000 and Windows XP
If your system is damaged and you need to restore it from your backup copy, follow the steps below:
www.maxtor.com
Maxtor P/N: 20279700
©2005 Maxtor Corporation. Maxtor and the Maxtor stylized logo are registered trademarks, and Maxtor OneTouch
is a trademark of Maxtor Corporation. Dantz and Retrospect are either registered trademarks or trademarks of
EMC Corporation. Specifications subject to change without notice.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Maxtor 800 User manual
-
Seagate Quick Start
-
Seagate Quick Start
-
Seagate Installation guide
-
-
-
-
-
-
Seagate STM902503OTB3E1-RK One Touch 4 Mini 250 GB Hard Drives User manual