Emprex ME1 User manual

1

Multimedia Enclosure

ME1

User’s Manual

1

Table of Contents

Before using ...................................................................3

Preparations..................................................................10

Install the HDD into ME1 ..................................................................10

Connection ...................................................................12

Connecting ME1 with TV or monitor ................................................12

Plugging the AC power ......................................................................15

Getting started..............................................................16

Initializing the HDD...........................................................................16

Basic operation.............................................................20

Watching the input video....................................................................20

One Touch Recording

....................................................................20

Time Shifting................................................................................21

Playback the recorded video...............................................................22

Play : Play the recorded video ........................................................23

Delete : Delete the video selected

...................................................24

Rename : Rename the name of the video ........................................24

Sorting : Change the sequence of video list .....................................25

Title Edit : Edit the select video title...............................................25

Browsing the multimedia files............................................................28

Advanced operation .....................................................33

2

FAQ..............................................................................41

Technical Specifications...............................................42

3

Before using

I. Checking the package contents

A. Accessory

Remote

Control 1pc

(With

Battery)

Composite AV

cable 1pc

Composite

AV

extension

Cable 2 pcs

White

Red

Yell ow

Power adaptor &

AC power cord

1set

Component

video

extension

Cable 1pc

Green

Red

Blue

USB Cable 1pc

Manual 1pc

QIG 1 pc

Screw driver

1pc

Screw pack

1 pc

4

B. Preparing the remote control

1.

Pull out the

isolator

2.

Ready to use

Pull out a piece of isolator, then remote control can be used.

C. How to replace battery of remote control

When the remote control runs out of battery, you may follow the

instructions to replace the battery.

1. Open the battery cover

2. Put in CR2025 battery

( Positive pole "+" face

up)

3. Put on the battery cover

5

Note:

1. The model of the battery is CR2025.

2. Please confirm the polarity before you insert the battery.

6

II. Name and function

A. Front Panel

1. LED cover

2. IR receiver

(For remote control)

3. Power button

4. Stand

7

B. Back Panel

1. Fan

2. Ethernet jack

3. USB Host port

To connect with USB storage

device, or USB card reader

4. USB Device port

To connect with PC

5. (Component) YPbPr OUT jack

6. (Composite) AV OUT jack

7. (Composite) AV IN jack

8. DC IN Jack

8

1. POWER

2.

MENU

3.

PREW (Previous)

Jump to previous

4.

5.

PLAY

6.

ARROW keys

7.

ENTER

8.

RETURN

9. 0~9 Numeric keys

10.

DELETE

11.

REC (Record)

12.

MUTE

Turn off and on of the output audio

13.

FF (Fast forward)

14.

REW

(Fast Rewind)

15.

PAUSE/TIME SHIFT

Pause playing, or time-shift the

input video

9

16.

STOP/LIVE

Stop playing, or time-shifting

17.

SLOW (Slow play)

18.

A-B

(A-B repeat)

19.

REPEAT

20.

VOL +, VOL -

21.

ZOOM

Zoon in the display

22.

DISPLAY

Show or hide the status display

23.

RESOLUTION

10

Preparations

Installing the HDD into ME1

1.Remove remote control 2.Unscrew the HDD frame from

the bottom (2 screws)

3.Pull out front panel with HDD frame 4.Connect the data cable and

power cable to HDD

5.Put HDD in the frame 6.Screw HDD with the frame (4

screws)

11

7.Slide the HDD frame in

8. Frame with holes should be on

the bottom side

9. Screw HDD frame from the Bottom

12

Connection

Connecting ME1 with TV or monitor

A. Composite audio and video output connection

Plug the black mini plug of the supplied composite AV extension cable into the

AV OUT

jack on ME1. Use the supplied composite AV cable to connect the

AV extension cable and AV input port on your TV or monitor. Be sure to

match the color of the plug with color of the jack on TV or monitor. ME1

supports NTSC and PAL video signal from the

AV OUT

jack.

Figure Composite AV OUT connection

13

B. Component (YPbPr) video and audio output connection (To

have better video quality)

Plug the black mini plug of the supplied Component video extension cable into

the

YPbPr

jack on the ME1. Use a component (YPbPr) video cable (NOT

supplied) to connect the component video extension cable and component

(YPbPr) video input port on your TV or monitor. Be sure to match the color of

the plug with color of the jack on TV or monitor. ME1 supports NTSC and

PAL progressive scan, 720p, and 1080i component video output.

Use the supplied composite AV cable to connect the AV extension cable and

audio input jack of the component input port on your TV or monitor. Be sure

to match the color of the plug with color of the jack on TV or monitor.

Note:

1. Standard component video cable is NOT included. In order to have

good video quality, to use a standard YPbPr component video cable is

suggested.

2. Only one of the two connections described above is required.

Figure Component (YPbPr) connection

14

C. Connecting with other video source

ME1 can play, time-shift and record the input video from other device, such as

VCR, Set top box, DVD player, and Camcorder. ME1 can support both NTSC

and PAL input video signal from AV IN jack.

Plug the black mini plug of the supplied composite AV extension cable into the

AV IN

jack on ME1. Use the supplied composite AV cable to connect the AV

extension cable and audio/video output port on other device. Be sure to

match the color of the plug with color of the jack (yellow, white, and red) on the

device.

Figure

Composite AV IN connection

15

Plugging the AC power

Insert DC plug of the adaptor to

DC IN

jack on ME1. Connect one end of AC

power cord to power adaptor and plug the AC plug to a power outlet.

Figure

Power connection

16

Getting started

Turn on your TV or monitor and ME1. If your TV or monitor can not

display correctly, press RESOLUTION key to change the resolution.

Initializing the HDD

In the first time using ME1, you should initialize the HDD of ME1 after a

new HDD is installed

Please follow the following procedure to initialize the HDD.

Select

OK

to confirm the process.

Step 1: To set the buffer size for time shifting function.

The buffer is used to temporarily store the input video for time shifting

function. You can choose from 1 hr to 4 hrs. Press

g, h

key to adjust.

Select NEXT to proceed to the next step.

17

Step 2: Adjust the size for video recording.

Once you specify the size, rest of the HDD can be used for storing music,

photo, and video files. Press

g, h

key to adjust.

Select NEXT to proceed to the next step.

Step 3: Start the format process.

Once you confirm all the previous adjustment, select Format to start the

process.

Warning:

1. Once ME1 start formatting, all the data in HDD will be destroyed.

18

Initial setup

Once the HDD is initialized, you can start the ME1 initial setup process.

Note:

1. ME1 can operate without HDD installed.

Enter Setup menu from the top Menu.

Figure: To p Menu

Enter

Video

setup to change the setting to match your TV or monitor

specification.

You can press

i, j, g, h

key to select a setting, and press

ENTER

to

19

change setting.

Figure: Video setup menu

Enter

System

setup to select the

Menu Language

, and set

Time.

Figure: System

setup menu

Note:

1. Please refer to Advanced Operation chapter in the manual on Setup

procedure.

2. The

Time

setting can only last for some time after the AC power cord

is unplugged.

Page is loading ...

Emprex ME1 User manual

Emprex ME1 User manual

Related papers

Other documents