OPPO Digital OPDV971H User manual

DVD PLAYER

USER MANUAL

READ CAREFULLY

BEFORE OPERATION

LED

Sound field /EQ Adjustment

DVI Output

22

23

26

27

28

29

23

25

DVI output, with more vivid and brilliant pictures.

AC 110V~240V, 50Hz~60Hz

entertainment

video

Component video

in

CH outputs.

fans'

mechanical

6

-

MAINS plug is used as the disconnect device, so mains plug shall always remain readily operable.

PLAY/PAUSE button

TV screen displays:

VFD Display Window Illustration

PREFACE

Control Button Locations and Explanations(Continued)

Rear Panel IIIustration

Mixed Audio Out jack

5.1CH Audio Out jacks

S-Video

Video Out jack

Y Cb Cr Out jacks

Digital Audio Coaxial Out jack

Digital Audio Optical Out jack

8

3

7 8

10

2

4

5

6 9

DVD disc

PBC

3

4

Chapter or Track

2

9

Repeat

PAUSE

Dolby Digital

PLAY

10

8

Super VCD,VCD,CD disc

5

6

Playback time

7

Playback status indication

Digital Video Out jack

8

PREFACE

5

Switch in digital video jack outputs:

480-line progressive /576-line progressive,

720-line progressive, 1080-line interlace.

DVI Button

Open or close the disc tray.

EJECT Button

35

Press once to stand by, twice to play.

STANDBY Button

Change the audio language or audio channel.

AUDIO Button

2

Play from the desired location.

GOTO button

3

Zoom in/out the displayed frame.

ZOOM Button

4

Fast forward play.

FWD Button

14

Change camera angles.

ANGLE Button

5

6

Press once to mute, twice to unmute.

MUTE button

DVD titles.

TITLE button

7

Fast backward play.

REV Button

13

10

Function setup.

SETUP Button

Normal playback.

PLAY Button

11

Stop playback.

STOP Button

12

8

CURSOR Buttons

SELECT Button

9

15

Fall tone.

KEY Button

Switch the TV system between PAL, NTSC and AUTO.

P/N Button

16

Rise tone.

KEY Button

Decrease volume.

VOLUME-

21

Increase volume.

VOLUME+

22

Slow play.

SLOW Button

26

Skip forward.

NEXT Button

24

25

28

A-B Button

Repeat the select.

23

27

Display DVD menu or open/close PBC.

MENU Button

29

REPEAT Button

Repeat play.

Back to the previous menu/Clearing input numbers.

RETURN Button

30

2731

Display or hide disc information.

OSD Button

32

NUMBER Buttons

27

33

Change subtitle languages/Switch JPEG

display modes.

SUBTITLE Button

34

Control Button Locations and Explanations (Continued)

Remote Control Illustration

36

37

PAUSE/STEP Button

Pause or play frame by frame.

CLEAR Button

Clearing input numbers.

PSM Button

Power Spectrum Meter on/off.

PREV Button

Skip backward.

SF

KEYBOARD

DVI

REV

EQ

6

3

2

5

7

8

9

12

11

13

14

16

31

30

27

29

28

18

17

19

20

24

23

21

22

15

4

26

25

10

32

33

35

34

36

37

18

17

19

20

KEY #

Open/close the virtual keyboard function.

KEYBOARD Button

SF Button

Adjusting equalization effects.

EQ Button

Adjusting sound field effects.

1

2PCS

Use

Connected to Digital TV set with DVI input

Audio Cord

Audio In

If the TV set has the video component input, the video component output of this player can be used.

(Y)

(Cb)

(Cr)

Rear Panel

Or

S-Video

Video Cord

S-Video Cord

Audio Cord

Audio In

Video In

S-Video

Video Component

Input

23

an

IN

that of

Video In

Rear Panel

Video Cord

Audio Cord

Audio In

Amplifier equipped with Dolby Pro Logic Surround

Video Cord

Video In

Amplifier with Dolby Digital Decoder

Rear Panel

Coaxial In

V Coaxial Cord

Optical Cord

Optical In

Connect either of the cords

23

Front Left Speaker

Center Speaker

Front Right Speaker

Subwoofer

Surround Left Speaker

Surround Right Speaker

Set the corresponding channel of any connected speaker not in use as 5.1CH mode.

and

The player automatically reads disc information.

DVD menu or subtitle displays on TV screen when

playing DVD disc; when playing SVCD and VCD

2.0 discs, menu displays on TV screen and the player

turns into PBC playback status; when playing CD

and VCD1.1 discs, the player plays according

to the track order.

6.Press STANDBY buttonto enter standby mode.

,and TV screen displays:

when

So switch into stop status.

1.Press P/N button to select PAL system if the

system of TV set is PAL, and TV screen displays:

decrease

Press PAUSE/STEP button once to entre panse

playback and TV screen displays:

2.Press PAUSE/STEP button n pause mode,

and each press moves one frame forward.

Press PAUSE/STEP button continuously to

entre playback.

When you set the screen saver mode to ON (See

Page 22 for details), the display on TV screen

turns to screen saver status after the picture on

TV screen keeps still for about 2 minutes (in the

mode such as pause mode, stop mode, menu select,

setup menu, no disc mode and so on).

Press KEY # button to increase tone. Each press

increases tone for 1 level, and the maximum level

is 16.

Press KEY button to increase tone. Each press

increases tone for 1 level, and the maximum level

is 16.

and then press

Select main menu 1and TV screen displays as follows:

2.Submenu displays on TV screen after entering into

main menu 1.

For instance, pres number 5 and the player begins to

play the 5th track.

6.Pres the MENU button to shut off PBC and begins

the sequence playback function.

5.Press RETURN button to return to submenu. Press

it again to return to main menu.

2/2:

buttons 0-9 to directly select the corresponding

track if the track number is above 10 (including

10).

For example:

Language varies with different recorded discs.

When playing some DVD discs, the press of

LANGUAGE button may result in playing the

track from its beginning.

Press MUTE button and the word of MUTE

displays on TV screen.

Press MUTE button when there is no audio output.

You can select forward or backward playback

to search a certain point you desire when in

playback.

1. Press FWD button and then the player starts

fast forward playback.

Each press of F

WD button switches the playback

speed of DVD, Super VCD, VCD and CD discs

in the following sequence circularly:

2.Press REV button and then the player starts

fast reverse playback.

REV button

You may enjoy slow playback according to the

following steps.

1.Press SLOW button to turn to slow playback

mode, and the following displays on TV screen.

to resume

1. Press REPEAT button each time and TV screen

displays:

Page is loading ...

OPPO Digital OPDV971H User manual

OPPO Digital OPDV971H User manual

Related papers

Other documents