Cooper Lighting 195DCS User manual

Type
User manual

This manual is also suitable for

DESCRIPTION
Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Perforated
Meshplate
Thermal
Protector
Integral Low Voltage Transformers
Separate Wiring Compartment
18” flexible conduit
3.88”
23.25”
24.08”
29.61”
26.05”
6.25”
8.50”
3.88”
1.60”
6.50”
20.15”
5.75”
Required
above
ceiling
10.24”
45º x 45º
Adjust
Double
Gimbal
A ... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic or magnetic low voltage
transformers. Transformers and electrical
are mounted in a separate metal enclosure
box attached to the junction box with 18”
of flexible conduit. Transformer enclosure
includes a separated wiring compart-
ment and six knockouts for conduit entry.
Transformer enclosure features perforated
metal door for easy maintenance access
and cooler operation. Entire electrical
assembly (jbox and transformer enclosure)
is removable from the housing for easy
maintenance.
E ... Lamps
Six (6) 12V MR16 lamps mounted in
adjustable double gimbal. Lamp holders
are removable and may be regressed 1”
for additional cut-off. Lamps can accept
up to three optical accessories (i.e. lens
+ hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp
ring is secured with threadless, bayonet
action. Optional retractable arm is avail-
able for lamp pulldown and extreme
aiming.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws through the meshplate.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.13” x 24.34”
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Six (6) Light
12V MR16
Remodel Housing
Trimless
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes SIX (6) 12V MR16 lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 121107
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
71W magnetic transformers are remote and sold separately.
Configuration
C6
=
COMBOLIGHT
Recessed Six (6) Light
Housing
R
=
Remodel
C6 R N N
Lamp Type / Wattage Label
037M16
=
37 Watt max. MR16 12V
042M16
=
42 Watt max. MR16 12V
050M16
=
50 Watt max. MR16 12V
071M16
=
71 Watt max. MR16 12V
Power Supply
E
=
Electronic Low Voltage
Transformer
M
=
Magnetic Low Voltage
Transformer
Power Supply
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Insert
N
=
Trimless
Trim Insert
N
=
Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W
=
White
B
=
Black
S
=
Industrial Silver
  • Page 1 1

Cooper Lighting 195DCS User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI