Cornea Systems CT1503 User manual

CT1503/CT1702

User Guide

Revision: 1-A

23 January 2002

2

Congratulations!

Congratulations on your purchase of a state-of-the-art TFT

LCD Monitor by Cornea Systems, Inc.

We know you will be pleased with your investment and will

enjoy the dynamic viewing—You will never see images the

same again!

Our Monitor is easy to set up.

Just follow our simple instructions and you will be viewing a

“new world” in no time:

•

Connect

the Monitor to your PC, Tuner, DVD, VCR, etc.

•

Configure

/Set-up the Monitor

•

Adjust

the display

•

Enjoy

!

Because your satisfaction is important to us, please contact

us if you have any questions.

We can be reached at:

1-800-681-6155

Monday–Friday

8 a.m. – 5 p.m. (Pacific Time)

Part Number: XXXXXXXXX

Revision: XXXXX

3

Table of Contents

General Information

GENERAL INFORMATION: General Safety Precautions . . . . . . . . . . . . . . 5

GENERAL INFORMATION: Unpacking Your Monitor & Inventorying the

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Figure 1: Inventory of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Component Information

COMPONENTS: The Back of the Monitor (Connection Locations) . . . 10

Figure 2: CT1503 Connection Locations (Back-View of the Monitor) . . . . . . . . . . . . . . 10

Figure 3: CT1702 Connection Locations (Back-View of the Monitor) . . . . . . . . . . . . . . 11

COMPONENTS: The Front of the Monitor . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 4: CT1503/T1702: Front of the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Monitor Item Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjusting the Tilt (or Viewing Angle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Power Management Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

COMPONENTS: The Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Figure 5: Remote Control Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Remote Control Item Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting

CONNECTING: Your Monitor to Your Computer . . . . . . . . . . . . . . . . . . 17

Figure 6: Monitor-to-Computer Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 19

CONNECTING: Your Monitor to a Tuner (TV/CATV). . . . . . . . . . . . . . . . 20

Figure 7: Tuner (TV/CATV)-to-Monitor Connection Diagram . . . . . . . . . . . . . . . . . . . . . 22

CONNECTING: Other External A/V Devices to Your Monitor . . . . . . . . 23

Figure 8: Monitor-to-External A/V Devices Connection Diagram . . . . . . . . . . . . . . . . . 25

Configuring/Adjusting

CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode. . . . . 26

Initial Set-Up & Adjustment of the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Explanation of Remaining Menu Items: PC (ANALOG) Mode. . . . . . . . . . . . . . . . . . . . 31

CONFIGURING & ADJUSTING the Display: TV/CATV (TUNER) Mode . . 34

Initial Set-Up & Adjustment of the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4

Explanation of Remaining Menu Items: TV/CATV (TUNER) & S-VIDEO Modes . . . . . . . 37

CONFIGURING & ADJUSTING the Display: External Devices (S-VIDEO)

Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Initial Set-Up & Adjustment of the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Explanation of Remaining Menu Items: TV/CATV (TUNER) & S-VIDEO Modes . . . . . . . 37

Troubleshooting

TROUBLESHOOTING: Resolution to Potential Problems . . . . . . . . . . . . . 41

Appendix

APPENDIX: Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

APPENDIX: CT1503 Analog Display Modes (Analog) . . . . . . . . . . . . . . 47

APPENDIX: CT1702 Display Modes (Analog) . . . . . . . . . . . . . . . . . . . . . 48

APPENDIX: CT1703 Display Modes (Digital) . . . . . . . . . . . . . . . . . . . . . . 49

GENERAL INFORMATION: General Safety Precautions

5

GENERAL INFORMATION: General Safety Precautions

This Monitor has been engineered and manufactured to assure your

safety.

To avoid electrical shock and to prevent other injuries or

damage, please read this Manual and comply with the stated

warnings and procedures.

Foreign & Magnetic Objects

•Do not place anything heavy, wet or

magnetic on the Monitor or Power Cord.

•Do not cover the ventilation openings or

touch them with metallic or flammable

material.

Temperature

•Extreme temperature may cause

discoloration or damages.

•Avoid operating the Monitor in extreme heat,

humidity, or dusty areas.

•Ambient Temperature: 0°C– 40°C

Cleaning the LCD Surface

•To prevent any damage to the LCD surface:

•D

O

NOT

use solvents, (such as benzene).

•Instead, use a damp soft cloth.

GENERAL INFORMATION: General Safety Precautions

6

Proper Tools

•To prevent any scratches to the LCD surface,

DO

NOT

use small tools (such as a pin or a

pencil) near the Monitor.

Flat, Sturdy Surface

•Place the Monitor on a sturdy, flat surface to

prevent it from falling.

External Shocks

•D

O

NOT

hit, drop, or otherwise apply any

mechanical or physical shocks to the Monitor.

Ventilation

•Install the Monitor in a well-ventilated area.

•NOTE: Be sure the ventilation is not so strong

that blows over the Monitor.

Power Off

•Turn the Monitor

OFF

before connecting it to

the power outlet or surge protector.

•Also, while installing your Monitor, it is wise to

unplug your Computer and other

components from the power outlet.

GENERAL INFORMATION: General Safety Precautions

7

Risk of electrical shock. DO NOT OPEN the Monitor.

Secure Connections

•Make sure that the Monitor’s Power Cord and

the other devices’ power cords are properly

connected.

Other Electrical Safety Notes

•Overloading AC outlets and extension cords

are dangerous.

•Also, frayed Power Cords and the broken

plugs may cause electric shock or fire.

Do Not Open the Monitor

•There are no user-serviceable components

inside.

•There is a risk of exposure to high-voltage

electricity inside, even when power is turned

OFF

.

•If the Monitor does not operate properly,

unplug the Power Cord and contact your

dealer or Technical Support.

• Handling the electrical equipment carelessly

may cause electrical shock and other

hazards.

GENERAL INFORMATION: Unpacking Your Monitor & Inventorying the Parts

8

GENERAL INFORMATION:

Unpacking Your Monitor & Inventorying the Parts

Please make sure the parts shown in the following figure are included with

your Monitor.

If any of these items are missing or appear damaged, contact your dealer

or call Technical Support immediately.

Figure 1: Inventory of Parts

CT1503/CT1703

Monitor

Installation CD

15-Pin VGA

Signal Cable

Audio Cable

RCA Cable

S-Video Cable

Remote Control

User’s Manual

AC/DC

Power Adapter

Power Cord

USER MANUAL

GENERAL INFORMATION: Unpacking Your Monitor & Inventorying the Parts

9

Depending on the voltage requirements for your

area, the Power Cord may be different than what

is indicated in the figure.

When

unpacking

the Monitor and its components:

• Carefully open the box.

• Lay the box flat on a table and carefully slide the contents out

of the box.

• Do not “dump” the contents out of the box.

DO NOT remove the protective plastic cover from the Monitor.

This cover protects the screen during Installation, and will be

removed when the Installation is complete.

When

inspecting

the Monitor and its components:

• Verify all the components are present, according to the

previous figure.

• Verify the parts are not damaged.

Save the box and other packing material in case the

Monitor needs to be returned.

COMPONENTS: The Back of the Monitor (Connection Locations)

10

COMPONENTS:

The Back of the Monitor

(C

ONNECTION

L

OCATIONS

)

Figure 2: CT1503 Connection Locations

(Back-View of the Monitor)

Number Abbreviation Definition

1 VGA 15-Pin Connector for D-Sub (Analog)

2 PWR AC/DC Adapter Connection

3 OUT AUD Sound Out Connection

4 AUD IN Sound In Connection

5 ANTENNA Tuner (TV/CATV) Connection

6 S-VIDEO S-Video Input Connection

7 VIDEO Video Input Connection (Yellow)

8 L AUD Stereo Audio Left Connection (White)

9 AUD R Stereo Audio Right Connection (Red)

COMPONENTS: The Back of the Monitor (Connection Locations)

11

Figure 3: CT1702 Connection Locations

(Back-View of the Monitor)

Number Abbreviation Definition

1 OUT AUD Sound Out Connection

2 AUD IN Sound In Connection

3 VGA 15-Pin Connector for D-Sub (Analog)

4 PWR AC/DC Adapter Connection

5DVI

Digital Video Interface Connector

(To be used if the computer has a

digital VGA card.)

6 ANTENNA Tuner (TV/CATV) Connection

7 S-VIDEO S-Video Input Connection

8 VIDEO Video Input Connection (Yellow)

9 L AUD Stereo Audio Left Connection (White)

10 AUD R Stereo Audio Right Connection (Red)

11 USB USB Port (Optional)

11

10

9

8

7

5

6

4

3

2

1

COMPONENTS: The Front of the Monitor

12

COMPONENTS: The Front of the Monitor

Figure 4: CT1503/T1702: Front of the Monitor

Monitor Item Definition

Item Item Definition

1

LCD Panel

(screen)

CT1503: 15” TFT LCD, max. resolution 1024 x 768, 16.2M

color (true color).

CT1702: 17” TFT LCD, max. resolution 1280 x 1024, 16.7M

color.

2

Built-In

Speakers

After connecting the audio input, you can use the

speakers:

•CT1503: 2W output

•CT1702: 3W output

3 MENU Pressing this button displays the Main Menu.

COMPONENTS: The Front of the Monitor

13

4 SELECT

Pressing this button:

•Selects the highlighted menu item

•Selects the desired Input Source.

CT1503 Input Source Options/Scroll Sequence:

CT1702 Input Source Options/Scroll Sequence:

5

▼ CH

(Channel

Down)

Pressing this button:

•All Input Sources: Moves to the next lower menu

item.

•TV (Tuner): Selects the next lower channel.

6

▲ CH

(Channel

Up)

Pressing this button:

•All Input Sources: Moves to the next higher menu

item.

•TV (Tuner): Selects the next higher channel.

7

Remote

Control

Sensor

This sensor receives the signal from the Remote Control

device.

8 VOL

Pressing this button:

•Decreases the volume.

•In the MENU mode, decreases the value of the

parameter displayed or changes the displayed

option.

9VOL

Pressing this button:

•Increases the volume.

•In the MENU mode, increases the value of the

parameter displayed or changes the displayed

option.

10 AUTO

PC (Analog): Activates the auto adjustment function.

This function automatically adjusts the image’s position on

the LCD.

11 POWER

Pressing this button, turns the Monitor ON or OFF.

Item Item Definition

Digital S-Video Tuner Analog

Digital Composite S-Video Tuner Analog

Adjusting the Tilt (or Viewing Angle)

14

Adjusting the Tilt (or Viewing Angle)

Your Monitor was designed to allow you to adjust it to a comfortable

viewing angle.

The Monitor can be tilted forward 45

o

or back 90

o

.

To prevent the Monitor from falling over, make sure it is

within the “safe” viewing angle range.

Power Management Function

This Monitor is equipped with a DPMS (Display Power Management

Signaling) function that automatically cuts the power dissipation down to

less than 5W when the computer is left unattended.

Although the Monitor can be left in power-saving mode for

longer periods, we recommend that you turn it off after your

daily work.

Light Status Definition

Green Power

ON

.

Amber Power saving mode enabled.

COMPONENTS: The Remote Control

15

COMPONENTS: The Remote Control

Insert the battery into the Remote Control.

Figure 5: Remote Control Device

Remote Control Item Definition

Item Item Definition

1POWER

Pressing this item, turns the Monitor ON or OFF.

2 MENU Pressing this item displays the Main Menu.

3

▲ CH

(Channel

Up)

Pressing this item:

•All Input Sources: Moves to the next higher menu

item.

•TV (Tuner): Selects the next higher channel.

4

▼ CH

(Channel

Down)

Pressing this item:

•All Input Sources: Moves to the next lower menu

item.

•TV (Tuner): Selects the next lower channel.

COMPONENTS: The Remote Control

16

5VOL

Pressing this item:

•Increases the volume.

•In the MENU mode, increases the value of the

parameter displayed or changes the option

displayed.

6 VOL

Pressing this item:

•Decreases the volume.

•In the MENU mode, decreases the value of the

parameter displayed or changes the option

displayed.

7MUTE

Pressing this item turns the sound ON or OFF.

8SOURCE

Pressing this item scrolls through the available Input

Sources.

The Input Source’s name displays briefly in the upper

right-hand corner of the screen.

9 SELECT Pressing this item, selects the highlighted menu item.

Item Item Definition

CONNECTING: Your Monitor to Your Computer

17

CONNECTING: Your Monitor to Your Computer

1. Turn

OFF

and

UNPLUG

your Computer until instructed otherwise.

2. Carefully unpack all the components and verify all the parts are

present and undamaged.

(See page 8.)

3. Organize the cables you need and familiarize yourself with the

connection configuration.

(For the CT1503, see pages 10 & 19. For the

CT1702, see pages 11 & 19.)

4. With the Monitor laying screen-side down on a smooth, clean surface,

flip open the Monitor base.

For easier access to the cable connections, keep the

Monitor laying (screen-side down) on a smooth surface.

5.

Connect the 15-pin VGA Cable to the Monitor’s “VGA”

connector.

6. Connect the 15-pin VGA Cable to your Computer.

Using your fingers, hand-tighten the screws on the 15-Pin

connectors.

7.

Plug the Audio Cable into the Monitor’s “AUD IN”

connector.

To use a headset, plug the headset into “AUD

OUT” connector on the Monitor.

8. Connect the Audio Cable to your Computer at the speaker card

location.

9. If you

are not

connecting any more components (e.g. CATV, DVD or

VCR), continue with the remaining steps.

If you are connecting other components to the Monitor, continue to

the next appropriately labeled “CONNECTING” section.

CONNECTING: Your Monitor to Your Computer

18

10. Connect the round AC/DC Adapter Plug to the Monitor’s “PWR”

connector.

11. Connect the Power Cord to the AC/DC Adapter.

Do not

plug the Power Cord into the wall outlet/surge

protector yet.

12.

Stand up your Monitor and adjust it

for proper viewing.

(See page 14.)

13. Plug in the Power Cords for both the Monitor and Computer to the wall

power outlet or surge protector.

14. Turn

ON

both the Monitor and Computer.

15.

Remove the plastic protective cover

from the front of the Monitor.

16. Pressing either the SELECT button on the front of the Monitor

(page 12)

or the SOURCE button on the Remote Control

(page 15)

, scroll to the

ANALOG Input Source option.

Insert the battery into the Remote Control.

17. Insert the Set-up Disk into your Computer’s CD slot and follow the

instructions on page 27.

18. If necessary, fine-tune the display by using the On Screen Display

(OSD) menus (image position, brightness, and other items).

(See page 26.)

19. Enjoy your new Monitor from Cornea Systems, Inc.!

Save the original container and the packing materials in

case there are difficulties and you need to return the

Monitor.

CONNECTING: Your Monitor to Your Computer

19

Figure 6: Monitor-to-Computer Connection Diagram

CONNECTING: Your Monitor to a Tuner (TV/CATV)

20

CONNECTING: Your Monitor to a Tuner (TV/CATV)

1. Carefully unpack all the components and verify all the parts are

present and undamaged.

(See page 8.)

2. Organize the cable(s) you need and familiarize yourself with the

connection configuration.

(For the CT1503, see pages 10 & 22. For the CT1702, see pages 11 & 22.)

3. With the Monitor laying screen-side down on a smooth, clean surface,

flip open the Monitor base.

For easier access to the cable connections, keep the

Monitor laying (screen-side down) on a smooth surface.

4.

Connect the Antenna

(from your Cable TV or external/internal

antenna) into the Monitor’s “ANTENNA” connector.

The Antenna connection should be hand-tight.

5.

Connect the

round

AC/DC Adapter

Plug

to the Monitor’s “PWR”

connector.

6. Connect the Power Cord to the AC/DC Adapter.

Do not

plug the Power Cord into the wall outlet/surge

protector yet.

7. If you are not

connecting any more components (e.g. DVD or VCR),

continue with the remaining steps.

If you are connecting other components to the Monitor, continue to

the next appropriately labeled “CONNECTING” section.

8. Stand up your Monitor and adjust it for proper viewing.

(See page 14.)

Page is loading ...

Cornea Systems CT1503 User manual

This manual is also suitable for

Cornea Systems CT1503 User manual

Other documents