Wolf Microwave Ovens 19
wolfappliance.com/specs
ELECTRICAL REQUIREMENTS
Wolf microwave ovens require a separate, grounded
120 V AC, 60 Hz power supply. The service should have its
own 15 amp circuit breaker. A grounded 3-prong recepta-
cle should be located within reach of the power cord.
Planning Information
Wolf drawer microwave ovens can be installed in a
standard or flush inset application. A flush inset installa-
tion requires the microwave to be recessed into the
cabinet. Refer to the illustrations on the following pages
for minimum cabinet dimensions for your specific installa-
tion. The cabinet must be able to support 125 lbs (57 kg).
Wolf convection and standard microwave ovens can be
used freestanding or built-in with optional trim kit available
through your authorized Wolf dealer. For local dealer infor-
mation, visit the showroom locator section of our website,
wolfappliance.com.
In a freestanding application, allow 2" (51) of airflow space
on the top, rear and both sides. Built-in opening dimen-
sion accommodate air flow space.
In built-in applications, convection and standard
microwaves with trim kit will overlap stiles and rails and
will match overlaps of the L series and E series ovens.
Refer to the chart for overlap dimensions.
Microwave Trim Overlap Convection Standard
27" (686) E SERIES TRIM
Top Overlap
13
/16" (21)
7
/16" (11)
Bottom Overlap
13
/16" (21)
13
/16" (21)
Side Overlap
5
/8" (16)
13
/16" (21
30" (762) L SERIES AND E SERIES TRIM
Top Overlap
1
/4" (6)
7
/16" (11)
Bottom and Side Overlap
13
/16" (21)
13
/16" (21)
36" (914) L SERIES TRIM
Top Overlap
5
/16" (8) NA
Bottom and Side Overlap
13
/16" (21) NA
Interior Specifications
INTERIOR CAPACITY CU FT (L)
Drawer Microwave 1.0 (28)
Convection Microwave 1.5 (42)
Standard Microwave 2.0 (57)
INTERIOR DIMENSIONS W H D
Drawer Microwave 17
3
/8" (441) 5
7
/8" (149) 17
1
/8" (435)
Convection Microwave 16
1
/8" (410) 9
5
/8" (244) 16
1
/8" (410)
Standard Microwave 17
3
/8" (441) 10
1
/2" (267) 18
5
/8" (473)