Creative FPS1000 User manual

Brand: Creative

Model: FPS1000

Category: Soundbar speakers

Type: User manual

This manual is also suitable for

Four Point Surround FPS1000

Creative FPS1000

The Creative FPS1000 FourPointSurround system is a powerful and versatile audio system that can be used for a variety of purposes, including:

Home theater: The FPS1000 can be used to create a immersive home theater experience, with its four satellite speakers providing clear and detailed audio.
Gaming: The FPS1000 is also a great choice for gaming, as its accurate sound reproduction and powerful bass can help you to get the most out of your games.
Music: The FPS1000 can also be used to listen to music, with its wide frequency response and clear sound quality.

Creative FPS1000

The Creative FPS1000 FourPointSurround system is a powerful and versatile audio system that can be used for a variety of purposes, including:

Home theater: The FPS1000 can be used to create a immersive home theater experience, with its four satellite speakers providing clear and detailed audio.
Gaming: The FPS1000 is also a great choice for gaming, as its accurate sound reproduction and powerful bass can help you to get the most out of your games.
Music: The FPS1000 can also be used to listen to music, with its wide frequency response and clear sound quality.

Information in this document is subject to change without notice and does not represent a commitment on the part

of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means,

electronic or mechanical, including photocopying and recording, for any purpose without the permission of

Creative Technology Ltd.

User’s Guide

Version 1.0

April 1999

Soundblaster is a registered trademark of Creative Technology Ltd.

Microsoft, MS-DOS, Windows and the Windows Logo are registered trademarks of Microsoft Corporation.

FourPointSurround is a trademark of Cambridge SoundWorks, Inc.

Cambridge SoundWorks is a registered trademark of Cambridge SoundWorks, Inc.

All other products are trademarks of their respective owners.

Important Safety Instructions .............................................................................. 3

Warning................................................................................................................ 4

Introduction .......................................................................................................... 5

Inspecting For Damage........................................................................................ 6

Overview .............................................................................................................. 6

Installation Sequence ........................................................................................... 6

Speaker Placement ............................................................................................... 7

Speaker Wiring Diagram ..................................................................................... 8

Satellite Connections ........................................................................................... 9

Attaching The Desktop Stands .......................................................................... 10

Attaching The Floor Stands ............................................................................... 10

Power Supply Adapter ....................................................................................... 11

The Volume Control .......................................................................................... 12

Mounting the Volume Control .......................................................................... 13

Adjusting Output Level ..................................................................................... 13

Subwoofer Level Control .................................................................................. 14

Important ............................................................................................................ 14

Optimizing The Sound Of Your System ........................................................... 15

Mounting the Satellites ...................................................................................... 15

Specifications ..................................................................................................... 16

If You Have a Problem ...................................................................................... 16

Limited Warranty............................................................................................... 17

Creative Technical Services ............................................................................ 181

Contents

FourPointSurround

FPS1000

READ INSTRUCTIONS - All safety and oper-

ating instructions should be read before the

FourPointSurround FPS1000

amplified sub-

woofer/satellite system is operated.

RETAIN INSTRUCTIONS - The safety and

operating instructions should be retained

for future reference.

HEED WARNINGS - All warnings on the

subwoofer and in the operating instruc-

tions should be adhered to.

FOLLOW INSTRUCTIONS - All operating

and use instructions should be followed.

CLEANING - Unplug the subwoofer from the

wall outlet or other power source before

cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for

cleaning.

ATTACHMENTS - Do not use attachments

not recommended by Cambridge

SoundWorks as they may cause hazards.

WATER AND MOISTURE - Do not use the

subwoofer near water—for example, near

a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a

swimming pool; and the like.

ACCESSORIES - Do not place the

FourPointSurround FPS1000

system on

an unstable cart, stand, tripod, bracket, or

table. The subwoofer or satellites may

fall, causing serious injury to a child or

adult, and serious damage to the product.

Use only with a cart, stand, tripod, bracket,

or table recommended by Cambridge

Sound-Works, or sold with the product.

Any mounting of the satellites or sub-

woofer should follow the manufacturer’s

instructions, and should use a mounting

accessory recommended by Cambridge

SoundWorks.

VENTILATION - Slots and openings in the

cabinet are provided for ventilation and to

ensure reliable operation of the subwoofer

and to prevent it from overheating, and

these openings must not be blocked or

covered. The openings should never be

blocked by placing the product on a bed,

sofa, rug, or other similar surface. The

subwoofer should not be placed in a built-

in installation such as a bookcase or rack

unless proper ventilation is provided or

Cambridge SoundWorks’ instructions

have been adhered to.

HEAT - The subwoofer should be situated

away from heat sources such as radia-

tors, heat registers, stoves, and other

products (including amplifiers) that pro-

duce heat.

POWER SOURCES - The subwoofer should

be operated only from the type of power

source indicated on the marking label. If

you are not sure of the type of power

supply to your home, consult your product

dealer or local power company. For prod-

ucts intended to operate from battery

power, or other sources, refer to the oper-

ating instructions.

POLARIZATION - The subwoofer may be

equipped with a polarized alternating-cur-

rent line plug (a plug having one blade

wider than the other). This plug will fit into

the power outlet only one way. This is a

safety feature. If you are unable to insert

the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit,

contact your electrician to replace your

obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

POWER-CORD PROTECTION - Power-sup-

ply cords should be routed so that they are

not likely to be walked on or pinched by

items placed upon or against them, pay-

ing particular attention to cords at plugs,

convenience receptacles, and the point

where they exit from the subwoofer.

LIGHTNING - For added protection for the

FourPointSurround FPS1000

system dur-

ing a lightning storm, or when it is left

unattended and unused for long periods

of time, unplug it from the wall outlet. This

will prevent damage to the subwoofer due

to lightning and power-line surges.

OVERLOADING - Do not overload wall out-

lets, extension cords, or integral conve-

nience receptacles as this can result in a

risk of fire or electric shock.

OBJECT AND LIQUID ENTRY - Never push

objects of any kind into the subwoofer

through openings as they may touch dan-

gerous voltage points or short out parts

that could result in a fire or electric shock.

Never spill liquid of any kind on the sub-

woofer.

SERVICING - Do not attempt to service the

subwoofer yourself as opening or remov-

ing covers may expose you to dangerous

voltage or other hazards. Refer all servic-

ing to qualified service personnel.

DAMAGE REQUIRING SERVICE - Unplug

the subwoofer from the wall outlet or other

power source and refer servicing to quali-

fied service personnel under the following

conditions:

a) When the power-supply cord or plug is

damaged.

b) If liquid has been spilled, or objects

have fallen into the subwoofer.

c) If the subwoofer has been exposed to

rain or water.

d) If the subwoofer does not operate nor-

mally by following the operating instruc-

tions; or exhibits a distinct change in per-

formance.

e) If the product has been dropped or

damaged in any way.

REPLACEMENT PARTS - When replace-

ment parts are required, be sure the ser-

vice technician has used replacement

parts specified by Cambridge SoundWorks

or have the same characteristics as the

original part. Unauthorized substitutions

may result in fire, electric shock, or other

hazards.

SAFETY CHECK - Upon completion of any

service or repairs to the

FourPointSurround

FPS1000

system, ask the service techni-

cian to perform safety checks to deter-

mine that the

FourPointSurround FPS1000

system is in proper operating condition.

WALL OR CEILING MOUNTING - The

FourPointSurround FPS1000

satellites

should be mounted to a wall or ceiling only

as recommended by Cambridge

SoundWorks.

IMPORTANT SAFETY INSTRUCTIONS

The exclamation point within an equilateral

triangle is intended to alert the user of the

presence of important operating and main-

tenance (servicing) instructions in the lit-

erature accompanying this product.

WARNING:

TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

IMPORTANT

The lightning flash with arrowhead, within

an equilateral triangle, is intended to alert

the user of the presence of uninsulated

“dangerous voltage” within a product’s en-

closure that may be of sufficient magnitude

to constitute the risk of electric shock to

persons.

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SUBWOOF-

ER’S COVER. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

READ AND HEED IMPORTANT SAFETY WARNING

ON BOTTOM OF SUBWOOFER ENCLOSURE

CAUTION: TO PREVENT ELECTRIC

SHOCK, MATCH WIDE BLADE OF PLUG

TO WIDE SLOT, INSERT FULLY.

The following section

CAUTION: This devic

CSA/TUV/UL certified

computers in the manu

Check the equipment o

equipment manufactur

suitable for user-install

Modifications

Any changes or modifi

grantee of this device c

device.

Compliance

This product conforms

Directive 89/336/E

hank you for purchasing

FourPointSurround™ FPS1000.

FourPointSurround FPS1000

Introduction

lets you experience the full potential

of the multichannel sound encoded

in today’s latest computer software.

We think you will find it adds an

exciting new dimension to computer

sound and gaming.

The following sections contain notices for various countries:

CAUTION: This device is intended to be installed by the user in a

CSA/TUV/UL certified/listed IBM AT or compatible personal

computers in the manufacturer’s defined operator access area.

Check the equipment operating/installation manual and/or with the

equipment manufacturer to verify/confirm if your equipment is

suitable for user-installed application cards.

Modifications

Any changes or modifications not expressly approved by the

grantee of this device could void the user’s authority to operate the

device.

Compliance

This product conforms to the following Council Directive:

Directive 89/336/EEC, 92/31/EEC (EMC), 73/23/EEC (LVD)

Safety & Regulatory Information

Installation SequenceInspecting For

Damage

Examine each speaker unit carefully for

signs of shipping damage. If there is any

damage, do not install the system and

follow the procedure outlined in the

section “If You Have a Problem.”

All the items shown in the illustration

should be included. If anything is missing,

notify the retailer.

Save the carton and its inserts in case

you need to transport your PCWorks

FourPointSurround FPS1000 system

later.

1. Read through the instructions

before installing the speakers. The

instructions assume you have a 4-

channel sound card, one that

supports Direct Sound 3D and has

front and rear stereo outputs. If your

sound card has a single stereo

minijack line output, please read the

note under “Volume Control” on

page 12.

2. Place the satellites and the

subwoofer at appropriate sites

near your computer. Attach the

stands, if necessary.

3. To help you identify each

satellite’s channel later, apply the

appropriate preprinted label to the

rear of each satellite.

4. Connect the four satellites to the

back of the subwoofer enclosure.

Leave all the wires accessible.

FourPointSurround FPS1000 consists

of a powered subwoofer, four satellite

speakers and a volume control. All five

speakers are magnetically shielded.

The subwoofer is designed to sit on

the floor beneath a desk, and sounds

best in this position. The satellites used

for the front left and right channels

should flank the computer monitor. The

satellites used for the rear left and right

channels can be placed on the desktop,

on floor stands, or attached to other sites

with hook and loop fasteners.

Overview

Subwoofer/amplifer

Desktop Stands for satellites (4)

Volume Control with 12 ft. audio

connecting cable and stereo mini-plugs*

DC Power

Adapter

(4) Hook & Loop

fasteners for the

satellite cubes

(one each)

Satellites: (2) with 9 ft. speaker wire attached, (2) with 12 ft. speaker wire attached

Labels

(6) Rubber foot plugs

Semipermanent

mounting strip

(1) for attaching

volume control

Strips of 5 feet (4)

(2) Apex Joints

(2) Slotted Legs(4) Solid Legs

Speaker Placement

The front left and front right satellites

should be placed to the sides of the

monitor. When placing satellites on

the desktop, install the desktop

stands. If you wish to save desktop

space, use the hook and loop fasteners

to attach the satellites to the sides of

the computer monitor (see page 15).

If your are lucky enough to have

side walls close to your listening

position, excellent placement for the

left rear and right rear satellites is

alongside or behind your listening

position, slightly above ear level (use

the hook and loop fasteners, see

diagram A). Do not be concerned if

this is not practical, since any rear

satellite placement to the left and right

side of the listening position will

attach the rear satellites under a desktop

or at the sides of a desk using the hook

and loop fasteners (D).

The subwoofer does not contribute to

directional sound effects. Its optimum

position is on the floor against the wall.

The closer the subwoofer is to the

corner, the stronger the maximum

bass output. Alternately, it can be

placed on a shelf or other sites, but its

maximum output will be reduced.

provide strong directional and

surround effects.

The rear satellites may be installed

on their convenient floor stands (see

diagram B). When listening, the stands

should be positioned to the immediate

left and right of your listening

position. The stands are small enough

to be stowed underneath or alongside

a desk when not in use.

The rear satellites may also be

placed in any convenient sites

alongside the listener, including sites

slightly forward of the listening

location. The rear satellites do not

have to be at exactly the same height,

nor at the same height as the front

satellites. Try the extreme corners of a

desk using the desktop stands (C) or

5. Connect the Volume Control to the

subwoofer and then to the sound

card line outputs.

6. Connect the power supply adapter.

7. Listen to the system and adjust the

Subwoofer Level control for the

most pleasing bass output.

8. You may wish to experiment with

satellite placement briefly before

concealing the connecting wires

and making the installation more

permanent.

Speaker Wiring Diagram

Your plug adapter may vary

depending on your country

One pair of satellites has 9 foot

(3 meter) cables and one pair has 12

foot (4 meter) cables. Typically, the

satellites in the rear will require

longer cable lengths,

but the satellites are otherwise

identical. If you need extra cable

length for the front channel

satellites, use the ones with

longer cable there instead.

A panel of eight self-adhesive

labels is provided to identify each

satellite. To start, apply the small,

square “FRONT RIGHT” label to the

back of a satellite (see diagram A).

Then wrap the remaining, longer

“FRONT RIGHT” label around the

satellite cable just behind the plug

(see diagram B).

Insert the satellite’s plug into the

corresponding output jack on the

subwoofer (see Speaker Wiring

Diagram).

Repeat the process for the

remaining three satellites.

Satellite Connections

Attaching The Desktop Stands

For most applications, the satellite

speakers should be used with their

desktop stands. Install each stand by

inserting it into the “

” shaped

socket in the back of each satellite.

Make sure to feed the wires through

the cut-out in the top of the desktop

stands (see diagram C).

For desktop placement, apply the

five self adhesive feet to the base of

the desktop stands. If you wish to

install the rear satellites in the floor

stands, do not apply the self

adhesive feet to the base of their

desktop stands (see diagram D).

Attaching The Floor Stands

apex joint.

4. Slide the back of the satellite’s

desktop stand into the front of

the slot in the apex joint. The

slot’s front is the side further

away from the rear leg socket.

Make sure the stand is securely

pressed into the slot (see

Diagram F).

5. At the base of the rear leg,

gently pull on the satellite cable

to remove any unnecessary

slack in the cable.

6. Insert a rubber plug into the

base of each leg, taking care to

feed the cable out the short

notch in the rear leg (see

Diagram G).

The rear satellites (with their

desktop stands attached) may be

installed in their floor stands.

1. One leg of each floor stand has

a full length slot, with short

notches opposite the slot at

each end. Insert a satellite cable

inside one of these legs by

feeding it down the length of

the full length slot. At each end,

feed the cable through the short

notches (see Diagram E).

2. Ensure there are no feet

attached to the satellite’s

desktop stand. Insert the

satellite end of the leg/cable

assembly into the middle socket

of the apex joint. Make sure the

satellite cable exits through the

short notch and not the full

length slot (see Diagram F).

3. Insert the two solid legs into

the outside sockets in the

Power Supply Adapter

Confirm that the power switch is in

the “OFF” position. Insert the power

supply’s AC plug into the

appropriate receptacle. Insert the

small DC connector into the

“12V DC IN” receptacle on the

back of the subwoofer.

The Volume Control

The FourPointSurround FPS1000

system comes with a separate wired

Volume Control, designed to be

positioned close at hand and affixed

with the semipermanent mounting

strip.

Each plug has either an “F” or an

“R” moulded into it. One pair

of plugs connects to the audio inputs

on the back of the subwoofer (SUB).

The other pair connects to the sound

card line outputs (LINE). Connect

the two pairs of signal plugs before

affixing the Volume Control (see

diagram at right). Connect the “F”

LINE plug to the front stereo line

output minijack of your sound card.

Connect the “R” LINE plug to the

rear or “surround” line output

minijack of your sound card.

Connect the “F” SUB plug to the

“Front” minijack input on the

Subwoofer. Connect the “R” SUB

plug to the Rear minijack input on

the Subwoofer (see diagram H).

At this point you may now turn

the power switch “ON”.

If you have a stereo soundcard

(one without a rear stereo minijack

line output), connect the “F” LINE

plug to the stereo line output

minijack of your soundcard (see

diagram I). Leave the “R” LINE

plug unconnected. Connect the “F”

SUB plug to the “Front” mini-jack

input on the subwoofer. Leave the “R”

LINE plug unconnected.

If you upgrade to a four-channel

sound card, connect both “F” and

“R” LINE and SUB plugs to the

soundcard and subwoofer and enjoy

full surround sound.

Note: When only one of the two

stereo inputs on the subwoofer is

used (either “Front” or “Rear”), the

stereo signal will be reproduced by

both the front and rear pairs of

satellites.

Adjusting Output Level

In most instances, the

FourPointSurround FPS1000 Volume

Control will be the most convenient

way to adjust the overall playback

level. It responds instantly and

doesn’t require you to pause games

or programs. But there are other

output level controls present in

software to consider.

Versions of Microsoft

and

Windows

and most other operating

systems offer an on-screen sound

level control, while most game

programs provide yet another one.

For the FourPointSurround FPS1000

Volume Control to perform at its

best, these “software” level controls

should be set to an “optimum”

position and then left alone.

Set any software volume controls

to approximately 75% of their

maximum output level. This should

allow the FourPointSurround

FPS1000 Volume Control

to achieve the highest output

level desired when set to its loudest

setting.

If the FourPointSurround

FPS1000’s maximum output is still

not sufficient at the extreme setting

of its Volume Control, try

increasing one and only one of the

software volume controls to

increase overall output.

If you find the optimum output

level of the FourPointSurround

FPS1000 system occurs at too low

a setting of its volume control,

reduce the setting of one software

volume control (preferably the

operating system’s output level

control) to achieve greater

control range.

Note: Some software volume

controls may introduce distortion

when set to their maximum level.

Experiment to achieve the cleanest

sound.

Mounting The Volume Control

Press exposed adhesive side

firmly against back of volume

control.

Remove protective paper from one

side to reveal adhesive.

Press control firmly against

mounting surface

(desktop, keyboard or monitor).

Remove remaining paper strip.

The enclosed mounting strip is

semipermanent—it holds well but can

be peeled off gently. Be sure that the

mounting surface, such as the

computer monitor or your desktop, is

smooth and clean.

REAR

FRONT

The output of the subwoofer should

be adjusted to suit the listener’s

taste. Start with the volume control

in the 12 o’clock position (see

diagram below). After using the

system for a little while, adjust the

control up or down to fine tune it.

Subwoofer Level Control

Important

Playback Levels

FourPointSurround FPS1000 is

intended for individual or small

group listening and will achieve

surprisingly high output levels.

However, playing the system

continuously at overly loud,

distorted levels on heavy bass

program material may cause its

internal fuse to blow.

The fuse can be replaced only by a

qualified representative. To avoid

this inconvenience and a possible

non-warranty repair charge, reduce

the playback volume when the

system shows obvious signs of

stress, i.e. it sounds “raspy,”

“fuzzy,” and/or “muddy.”

Mounting The Satellites

To a flat surface:

To mount the satellites the side of a

monitor or other flat surface, use

the self-adhesive “hook and loop”

fastener squares.

To the wall:

To wall-mount the cubes on

structurally strong surfaces (a wall

stud or wood panelling), screw the

No. 10 screws into the material.

Allow their heads to protrude about

inch to fit into the keyhole slots

Once you have adjusted the

subwoofer level control, leave it in

that position. It should not be used to

compensate for differences in

recordings or games.

Have a clear line of sight from your

listening position to the satellites. This

prevents their higher frequencies from

being blocked. It is not necessary for

each satellite to be aimed directly at

the listener.

The relative strength of low bass

depends on how close the subwoofer

is to intersecting room surfaces. The

most bass output results from the

subwoofer placed on the floor in a

corner. The least bass output results

with the unit positioned away from

any corners or walls.

Optimizing The Sound Of Your

System

on the back of each cube (as shown

below).

The plastic anchors supplied will be

needed to secure the screws in most

wall surfaces. If so, drill

inch holes

in the wall, then tap the anchors into the

holes until they are flush with the wall.

Then screw the screws into the anchors

until they protrude about

inch.

Be sure to apply the stick-on rubber

feet to the back of the satellite cubes.

This assures an acoustically secure

installation.

Hook and loop fastener mounting Keyhole slot mounting

If You Have a Problem

Please retain all contents including packaging and proof of purchase until you

are fully satisfied with product.

If you find that you have a problem with your Creative product and believe

that it needs to be repaired or replaced, you should verify the purchase date

and take the appropriate action as detailed below:

Less than 30 days since date of purchase

Should your store receipt indicate that the product is less than 30 days old, you

have the option of calling Technical Support for assistance or returning the full

product to the dealer/retailer for a replacement or credit (see Creative

Technical Services section for contact numbers).

More than 30 days since date of purchase

First contact European Technical Support (see Creative Technical Services

section for contact numbers) to establish the nature of the problem and details

on our repair procedure. Creative Labs requires that all returns for repair/

replacement must first be issued with an authorisation number.

Returning a product for repair

• Contact Technical Support to receive your authorisation number for repair/

replacement of product.

• Technical Support will communicate how to return the product in question

for repair/replacement.

• You should only return the hardware item in question and return it to the

address detailed by technical support. Please retain all software, accessories

and the original packaging.

• Please quote the authorisation number clearly on the outside of the

packaging, in which you return the hardware item in question.

• Upon receipt of the faulty item, Creative Labs will process your request and

arrange return.

Specifications

FourPointSurround FPS1000’s

Five-channel

Amplifier Specifications

Satellite amplifier: One channel driven into a 4 ohm

load at less than 1% total harmonic

distortion, at 1kHz: 3.5 watts RMS.

Subwoofer amplifier: With a 4 ohm load at less than

1% total harmonic distortion, at 100Hz: 10 watts

RMS.

These specifications apply to a

FourPointSurround

FPS1000 operating from a 220 VAC line and a

12V DC power adapter.

Creative Labs (Ireland) Limited (“Creative”) warrants to you, the original

purchaser only, that the hardware product will be free of defects in materials

and workmanship for a period of two years after the date of purchase, or such

other period as may be required by applicable law (“Warranty Period”).

Creative’s entire liability and your remedy will be, at Creative’s sole discre-

tion, the repair or replacement (with the same or similar model of any

hardware or accompanying item(s) not meeting the “Limited Warranty”

explained above that is returned to Creative’s authorised distributor or dealer

during the Warranty Period with a copy of your receipt.

What this warranty does not cover

To the maximum extent permitted by applicable law, Creative disclaims all

other warranties and conditions, expressed or implied, including the condi-

tions of quality, merchantability or fitness for a particular purpose with respect

to the use of this product. Creative also disclaims any obligation to support

products for all operating environments - for example, by ensuring

interoperability with future versions of software or hardware. In no event shall

Creative or its licensors be liable for any indirect, incidental, special or

consequential loss or for any lost profits, savings or data arising from or

relating to the use of this product, even if Creative or its licensors have been

advised of the possibility of such loss.

Specifically, this warranty does not cover failures of the product which

result from accident, abuse, misuse, alterations (by persons other than Creative

or its authorised repair agents), moisture, corrosive environments, shipping,

high voltage surges, or abnormal working conditions. This warranty does not

cover normal wear and tear. You are specifically advised to take a backup copy

of any software provided with the Creative product for security purposes.

Note: This warranty gives you specific legal rights. You may have other rights

which vary from country to country. Certain limitations in this warranty are

not permitted by the jurisdiction of some countries, so some limitations here

may not apply to you.

Limited Warranty

Note: Creative may replace or repair the product with new or reconditioned

parts and the faulty parts will become the property of Creative. The warranty

period for your repaired/replacement items is 90 days from the date of

shipment from Creative, or what is left on the original item’s warranty, which

ever is longer.

To avoid tariffs when shipping a product to Creative Labs from outside the

E.U., you must complete the relevant customs documentation before shipping

the product (please allow 30 Days).

Creative FPS1000 User manual

Brand: Creative

Model: FPS1000

Category: Soundbar speakers

Type: User manual

This manual is also suitable for

Four Point Surround FPS1000

Creative FPS1000

The Creative FPS1000 FourPointSurround system is a powerful and versatile audio system that can be used for a variety of purposes, including:

Home theater: The FPS1000 can be used to create a immersive home theater experience, with its four satellite speakers providing clear and detailed audio.
Gaming: The FPS1000 is also a great choice for gaming, as its accurate sound reproduction and powerful bass can help you to get the most out of your games.
Music: The FPS1000 can also be used to listen to music, with its wide frequency response and clear sound quality.

Download PDF

report

Creative FPS1000 User manual

This manual is also suitable for

Creative FPS1000 User manual

Related papers

Other documents