Cateye CC-RD310W Owner's manual

CC-RD310W ENG 1

CATEYE

STRADA SLIM

CYCLOCOMPUTER

CC-RD310W

Before using the computer, please thoroughly read this manual and keep

it for future reference.

Please visit our website, where detailed instructions with movies are

available and the instruction manual can be downloaded.

Warning / Caution

•Donotconcentrateonthecomputerwhileriding.Ridesafely!

•Installthemagnet,sensor,andbracketsecurely.Checktheseperiodically.

•Ifachildswallowsabattery,consultadoctorimmediately.

•Donotleavethecomputerindirectsunlightforalongperiodoftime.

•Donotdisassemblethecomputer.

•Donotdropthecomputertoavoidmalfunctionordamage.

•WhenyoupresstheMODEbuttonwiththecomputerinstalledtothebracket,pressaroundthe

dotsectiononthesurfaceofthecomputer.Pressingstronglytheothersectionmayresultin

malfunctionordamage.

•Whencleaningthecomputer,bracketandsensor,donotusethinners,benzene,oralcohol.

•Disposeofusedbatteriesaccordingtolocalregulations.

•LCDscreenmaybedistortedwhenviewedthroughpolarizedsunglasslenses.

Wireless Sensor

Thesensorwasdesignedtoreceivesignalswithinamaximumrangeof60cm,toreduce

chanceofinterference.

Whenadjustingthewirelesssensor,notethefollowing:

•Signalscannotbereceivedifthedistancebetweenthesensorandthecomputeristoolarge.

Thereceivingdistancemaybeshortenedduetolowtemperatureandexhaustedbatteries.

•Signalscanbereceivedonlywhenthebackofthecomputerisfacingthesensor.

Interferencemayoccur,resultinginincorrectdata,ifthecomputeris:

•NearaTV,PC,radio,motor,orinacarortrain.

•Closetoarailroadcrossing,railwaytracks,TVstationsand/orradarbase.

•Usingwithotherwirelessdevices,orsomeparticularbatterylights.

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo

conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustac-

ceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.

Modiﬁcations

TheFCCrequirestheusertobenotiedthatanychangesormodicationsmadetothis

devicethatarenotexpresslyapprovedbyCatEyeCo.,Ltd.Mayvoidtheuser’sauthorityto

operatetheequipment.

This model comes with a sensor inspired by modern road bikes.

It may not be used for bikes with a large space between the front fork and

spoke.

Batterycasecover

Dotsection

MODE

L mm

CC-RD310W ENG 2

Perform the All Clear operation, when you use the unit for the ﬁ rst

time or restore the unit to the condition checked at the factory.

Preparing the computer

1 Clear all data (initialization)

PresstheACbuttononthe

backofthecomputer.

2 Select the speed units

Select“km/h”or“mph”.

MODE

km/h ↔ mph

3 Enter the tire circumference

Enterthefrontwheeltirecircumference

ofyourbicycleinmm.

*Refertothe“Tirecircumferencerefer-

encetable”asaguide.

MODE

Increasethevalue

MODE

Movedigits

(Press&hold)

4 Set the clock

PressingandholdingtheMODEbutton

switchesthedisplayto“Displayedtime”,

“Hour”,and“Minute”inorder.

MODE

12h↔24horincreases

thevalue

MODE

DisplayformatSwitch-

ing“Hour”and“Minute”

(Press&hold)

(Finish)

Tire circumference

Therearethefollowingwaystodeterminethe

tirecircumference.

•Measure the tire circumference (L)

Measurethedistancewhenthetireturnsright

roundwithyourweightapplied,whileadjusting

thetirepressureappropriately.

•Refer to the tire circumference reference table

*Generally,thetiresizeorETRTOisindicatedonthesideofthetire.

ETRTO Tire size

L (mm)

47-203 12x1.75 935

54-203 12x1.95 940

40-254 14x1.50 1020

47-254 14x1.75 1055

40-305 16x1.50 1185

47-305 16x1.75 1195

54-305 16x2.00 1245

28-349 16x1-1/8 1290

37-349 16x1-3/8 1300

32-369

17x1-1/4(369)

1340

40-355 18x1.50 1340

47-355 18x1.75 1350

32-406 20x1.25 1450

35-406 20x1.35 1460

40-406 20x1.50 1490

ETRTO Tire size

L (mm)

47-406 20x1.75 1515

50-406 20x1.95 1565

28-451 20x1-1/8 1545

37-451 20x1-3/8 1615

37-501 22x1-3/8 1770

40-501 22x1-1/2 1785

47-507 24x1.75 1890

50-507 24x2.00 1925

54-507 24x2.125 1965

25-520 24x1(520) 1753

24x3/4Tubular

1785

28-540 24x1-1/8 1795

32-540 24x1-1/4 1905

25-559 26x1(559) 1913

32-559 26x1.25 1950

ETRTO Tire size

L (mm)

37-559 26x1.40 2005

40-559 26x1.50 2010

47-559 26x1.75 2023

50-559 26x1.95 2050

54-559 26x2.10 2068

57-559 26x2.125 2070

58-559 26x2.35 2083

75-559 26x3.00 2170

28-590 26x1-1/8 1970

37-590 26x1-3/8 2068

37-584 26x1-1/2 2100

650CTubular

26x7/8 1920

20-571 650x20C 1938

23-571 650x23C 1944

ETRTO Tire size

L (mm)

25-571 650x25C

26x1(571) 1952

40-590 650x38A 2125

40-584 650x38B 2105

25-630 27x1(630) 2145

28-630 27x1-1/8 2155

32-630 27x1-1/4 2161

37-630 27x1-3/8 2169

18-622 700x18C 2070

19-622 700x19C 2080

20-622 700x20C 2086

23-622 700x23C 2096

25-622 700x25C 2105

28-622 700x28C 2136

30-622 700x30C 2146

ETRTO Tire size

L (mm)

32-622 700x32C 2155

700CTubular 2130

35-622 700x35C 2168

38-622 700x38C 2180

40-622 700x40C 2200

42-622 700x42C 2224

44-622 700x44C 2235

45-622 700x45C 2242

47-622 700x47C 2268

54-622 29x2.1 2288

60-622 29x2.3 2326

Displayformat

MinuteHour

Displayformat

Minute

CC-RD310W ENG 3

How to install the unit on your bicycle

Attach the bracket to the stem or handlebar

When mounting the bracket to the stem

*Useanylontietogeth-

ertoxitrmly.

When mounting the bracket to the handlebar

1-1

1-2

Refer to the Quick Start Manual, where you can learn how to

install the unit in detail using a movie.

http://www.cateye.com/en/products/detail/CC-RD310W/manual/

Bracket Bracketrubberpad

Rubberband

(largebandforbracket)

(middleandsmallbandsforsensor)

Magnet

Sensor

rubberpad

Speedsensor

Nylontie

1-2

2 3

1-1

Bracket

Bracket

rubberpad

Bracket

rubberpad

Rubberband

Nylontie

(SPD-02)

(x3)

Adjustthesensormagnetsothattheconditionsof , , aresatised,and

thenchecktheoperationbyturningthefrontwheelslowly.

Positioning and testing

5 mm

CC-RD310W ENG 4

How to install the unit on your bicycle

2Install the sensor

Install the magnet Remove/Install the computer

Install the sensor and magnet in a position where

the following conditions are satisﬁ ed.

Thedistancefromthecomputer

tothesensoriswithinthetrans-

missiondatalength,andtheback

ofthecomputerfacesdownward.

Themagnetpassesthroughthesensor

zoneofthespeedsensor.

Theclearancebetweenthesensorsur-

faceandthemagnetiswithin5mm.

Check the mounting position of the sensor and magnet

Getanestimateofthemount-

ingpositionwheretheclearance

betweenthemagnetsurfaceand

sensorzoneis5mmorless,by

slidingupanddownthesensor

andmagnetbeforemounting.

3 4

Whilesupportingitbyhand,

Pushitoutasifliftingthefrontup

Tothe SENSOR ZONE

Spoke

Magnet

Insidethe

frontfork

Rubberband

Nylontie

SENSOR ZONE

Speedsensor

(SPD-02)

Speedsensor

(SPD-02)

Magnet

Spoke

Insidethefrontfork

Sensorrub-

berpad

Click

Sensorrub-

Speedsensor

(SPD-02)

To“Changingthecomputersettings[Menuscreen]”(page7)

CC-RD310W ENG 5

Operating the computer [Measuring screen]

PressingMENUonthemeasurementscreen

changestothemenuscreen.Variousset-

tingscanbechangedonthemenuscreen.

*Theaveragespeeddisplays.Ein-

steadofthemeasurementvalue,

whenTmexceedsabout27hours

orDstexceeds999.99km.Reset

thedata.

Switching computer function

PressingtheMODEbuttonswitchestheselecteddataatthebottomintheordershowninthe

followinggure.

MODE

MODE MODE

MODE

Dst2

Trip Distance-2

0.00–999.99/

1000.0-9999.9km[mile]

AvAverage Speed

0.0–105.9km/h

[0.0–65.0mph]

TmElapsed Time

0:00’00”–9:59’59” DstTrip Distance

0.00–999.99km[mile]

MxMaximum Speed

0.0(4.0)–105.9km/h

[0.0(3.0)–65.0mph]

OdoTotal Distance

0.0–9999.9/

10000-99999km[mile]

Clock

0:00-23:59or

1:00-12:59

MODE

MODE operation when the computer

is mounted on the bracket

Whenthecomputerismountedonthebracket,

onceyoupressthedotsectionontheunit,the

MODEbuttonispressed.

Current speed

0.0(4.0)–105.9km/h

[0.0(3.0)–65.9mph]

Speed unit

Selected mode

Tire icon

Sensor signal icon

Flashesinsynchwithasen-

sorsignal.

Pace arrow

Indicateswhetherthecur-

rentspeedisfaster( )or

slower( )thantheaverage

speed.

CC-RD310W ENG 6

Operating the computer [Measuring screen]

Power-saving function

Ifthecomputerhasnotreceivedasignalfor10minutes,

power-savingscreenwillactivateandonlytheclockwillbe

displayed.

WhenyoupressMODE,orthecomputerreceivesasensor

signal,themeasuringscreenreappears.

Ifanother60minutesofinactivityelapsesinthepower-

savingscreen,onlythespeedunitisdisplayedonthescreen.

Withsuchascreen,pressingtheMODEbuttonreturnstothe

measurementscreen.

Resetting data

WiththedataotherthanDst2displayed,pressingandholding

theMODEbuttonreturnsthemeasurementdatato0.

WithDst2displayed,pressingandholdingtheMODEbutton

returnsonlyDst2to0.

Thetotaldistance(Odo)cannotbereset.

Starting / Stopping measurement

Theunitautomaticallymeasuresaccordingtothemovement

ofyourbicycle.

Thespeedunit(km/hormph)ashesduringmeasurement.

(Press&hold)

MODE

Starting

measurement

Stopping

measurement

1hour

10minutes

Sleep

Power-saving screen

CC-RD310W ENG 7

Changing the computer settings [Menu screen]

Measuring

screen

From“Selectingthemeasurementunit”

PressingMENUonthemeasure-

mentscreenchangestothemenu

screen.

Varioussettingscanbechanged

onthemenuscreen.

Switching the circumference A/B

Thetiretobeused(  )canbeselected.

MODE

↔ Switch

Setting the tire circumference

Setthetirecircumference.

To“Settingtheclock”

MODE

Increase

thevalue

Switching the

circumference A/B

Overview of the menu screen

Setting the tire

circumference

Setting the

clock

Setting the

function

Selecting the

measurement unit

Entering the total

distance

Withamenuyouwantto

changedisplayed,once

youpressandholdthe

MODEbutton,youcan

changevarioussettingby

thebuttonoperationas

described.

MODE

*Afterchanging,besureto

pressingtheMENUbut-

ton.

*Leavingthemenuscreen

withoutanyoperationfor

1minutesreturnstothe

measurementscreen,and

changesarenotsaved.

MODE MODE

(Press&hold) (Press&hold)

Changingthe

settings

Changingthe

settings

MENU MENU

setting

MODE MODE

MODE

(Press&hold)

Movedigits

MODE

(Press&hold)

Changingthe

settings

setting

CC-RD310W ENG 8

Changing the computer settings [Menu screen]

From“Settingthetirecircumference” To“Enteringthetotaldistance”

Setting the clock

Settheclock.

Setting the function

Youcanskiptheselecteddatatobedisplayed.

Onceyouselect“Off”foraparticularselected

data,itwillbeskippedinthemeasurementscreen.

*Theelapsedtime(Tm)cannotbeskipped.

*Eventhehiddenselectedmodeismeasured,

andthemeasurementresultwillbereected

whenitisdisplayedagain.

Selected

dataswitch

MODE

12h↔ 24h

MODE

ON↔ OFF

MODE

Increase

thevalue

MODE

Increase

thevalue

MODE

(Press&hold)

Dst

Dst 2

Odo

MODE

(Press&hold)

MODE

(Press&hold)

Hour

Minute

Selecting the display

MODE MODE

setting

MODE

(Press&hold)

Changingthe

settings

Changingthe

settings

CC-RD310W ENG 9

Changing the computer settings [Menu screen]

From“Settingthefunction” To“SwitchingthecircumferenceA/B”

Entering the total distance

Enterthetotaldistance.

(Nodecimalnumbercanbeentered.)

*Onceyouenteranyvaluetothetotaldistance,youcanstartfrom

thevalueyouentered.Usethisfunctionwhenyourenewyourunit

and/orreplacethebattery.

Selecting the measurement unit

Thespeedunit(km/hormph)canbeselected.

MODE

Movedigits

(Press&hold)

MODE

km/h↔ mph

MODE

Increase

thevalue

setting

MODE

(Press&hold)

Changingthe

settings

MODE MODE

MODE

(Press&hold)

Changingthe

settings

Standard accessories

Optional accessories

CC-RD310W ENG 10

In use

Troubleshooting

The sensor signal icon does not ﬂ ash.

(the speed is not displayed)

Checkthattheclearancebetweenthesensorandmagnet

isnottoolarge.(Clearance:within5mm)

Checkthatthemagnetpassesthroughthesensorzone

correctly.

Adjustthepositionsofthemagnetandsensor.

Isthecomputerinstalledatthecorrectangle?

Backofcomputermustfacetowardthesensor.

Checkthatthedistancebetweenthecomputerandsen-

soriscorrect.(Distance:within20to60cm)

Installthesensorwithinthespeciedrange.

Isthecomputerorsensorbatteryweak?

*Inwinter,batteryperformancediminishes.

Ifthecomputerreactsonlywhenitisclosetothesensor,

weakbatteriesmaycauseit.

Replacewithnewbatteriesaccordingtotheprocedure

speciedinthesection“Replacingthebattery”.

Nothing is displayed by pressing the button.

Replacethecomputerbatteryaccordingtotheproce-

durespeciedinthesection“Replacingthebattery”.

Incorrect data appear.

Clearallaccordingtotheproceduredescribedin“Pre-

paringthecomputer”.

Allmeasureddataaredeleted.

Maintenance

Tocleanthecomputeroraccessories,usedilutedneutral

detergentonasoftcloth,andwipeitoffwithadrycloth.

Replacing the battery

Computer

Whenthedisplaybecomesdim,replacethebattery.Installa

newlithiumbattery(CR1616)withthe(+)sidefacedupward.

*Afterreplacingthecomputerbattery,followtheprocedure

describedin“Preparingthecomputer”

*Notingthetotaldistancebeforereplacingthebatteryallows

youtostartfromthetotaldistanceyouentermanuallyafter

replacingit.

Speed sensor

Whenthespeedisnotdisplayedevenafteradjustingcor-

rectly,replacethebattery.

Insertnewlithiumbatteries(CR2032)withthe(+)signup-

ward,andclosethebatterycoverrmly.

*Afterreplacement,checkthepositionsofthesensorand

magnet.

1603890

Partskit

1603893

Rubberband/nylontie

1699691N

Wheelmagnet

1603850

Lithiumbattery

CR1616

1665150

Lithiumbattery

CR2032

1602196

Speedsensor

(SPD-01)

1600280N

Bracketband

(FlexTight™)

*Useasasetwith1602193

1602193

Bracket

(forFlexTight™)

*Useasasetwith1600280N

1603891

Speedsensor

(SPD-02)

1603892

Bracketkit

COIN

CR1616

Press

Slide

CR2032

CC-RD310W ENG 11

In use

2-8-25,Kuwazu,HigashiSumiyoshi-ku,Osaka546-0041

Japan

Attn:CATEYECustomerServiceSection

Phone :(06)6719-6863

Fax :(06)6719-6033

E-mail :[email protected]

URL :http://www.cateye.com

[For US Customers]

CATEYEAMERICA,INC.

2825WildernessPlaceSuite1200,BoulderCO80301-5494USA

Phone :303.443.4595

TollFree :800.5CATEYE

Fax :303.473.0006

E-mail :[email protected]

Limited warranty

2-Years Computer/Sensor only

(Accessories and Battery Consumption excluded)

CatEyecyclecomputersarewarrantedtobefreeofdefects

frommaterialsandworkmanshipforaperiodoftwoyears

fromoriginalpurchase.Iftheproductfailstoworkdueto

normaluse,CatEyewillrepairorreplacethedefectatno

charge.ServicemustbeperformedbyCatEyeoranautho-

rizedretailer.Toreturntheproduct,packitcarefullyand

enclosethewarrantycerticate(proofofpurchase)with

instructionforrepair.Pleasewriteortypeyournameand

addressclearlyonthewarrantycerticate.Insurance,han-

dlingandtransportationchargestoCatEyeshallbeborneby

persondesiringservice.ForUKandREPUBLICOFIRELAND

consumers,pleasereturntotheplaceofpurchase.Thisdoes

notaffectyourstatutoryrights.

Speciﬁcation

Battery

Batterylife

Computer

Lithiumbattery(CR1616)x1Ap-

prox.1year

(Ifthecomputerisusedfor1hour/

day;thebatterylifewillvaryde-

pendingontheconditionsofuse.)

Speed

sensor

Lithiumbattery(CR2032)x1

Distancereachesabout10000

km(6250mile)

Thisistheaveragegureofbeingusedunder20°Ctem-

peratureandthedistancebetweenthecomputerandthe

sensoris60cm.

Thefactory-loadedbatterylifemightbeshorterthanthe

above-mentionedspecication.

Controller 4bit,1-chipmicrocomputer

(Crystalcontrolledoscillator)

Display Liquidcrystaldisplay

Sensor Nocontactmagneticsensor

Transmission

distance Between20and60cm

Tirecircum-

ferencerange

0100mm-3999mm

(Initialvalue:A=2096mm,B=2096mm)

Workingtem-

perature

0°F-104°F(0°C-40°C)

(Thisproductwillnotdisplayappropriately

whenexceedingtheWorkingTemperature

range.SlowresponseorblackLCDatlower

orhighertemperaturemayhappenrespec-

tively.)

Dimensions/

weight

Computer 1-55/64”x1-17/64”x1/2”(47x

32x12.5mm)/0.43oz(12g)

Speed

sensor

2-43/64”x1-3/16”x21/64”(67.7

x30x8.1mm)/0.48oz(13.5g)

*Thespecicationsanddesignaresubjecttochangewithout

notice.

CO., LTD.

Cateye CC-RD310W Owner's manual

Related papers

Other documents