2. EZ Lighting
  3. EZSH022050BR00

EZ Lighting EZSH022050BR00 User manual

  • Hello! I am an AI chatbot trained to assist you with the EZ Lighting EZSH022050BR00 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Model#:
EZSH022050BR00/
EZSH022050WH00
Remove the fixture and moun ng package from the box and make sure that no parts
are missing by referencing the illustra on on the installa on instruc ons.
User Manual
Congratula ons on your EZ LIGHTING products purchase
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
WARNING
!
ASSEMBLY AND INSTALLATION
and then through the rubber gasket. Use the wirenuts to connect the white wire from the line feed
LED
X1
X2
X2
X2
X2
X3
X2
X1 X1
X1
L
N
white
black
5
GRD
a
b
a or b
340°
Warning: "CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR".
CONSULTER UN ÉLECTRICIEN QUALIFIÉ POUR VOUS ASSURER QUE LES CONDUCTEURS DE LA DÉRIVATION SONT ADÉQUATS
Trouble Shooting
EZ Ligh ng LLC
1385 Hwy 35, Suite 116, Middletown, NJ 07748
Tel:1-800-585-7239
Website:www.ez-
Mail:
Provided by www.ez-ligh
ng.com
SPECIFICATIONS
e lastest in LED technology
for maximum light output in a low-profile, compact housing. These fixtures come with
perfect system for your home and business. It is controlled by a sensor, which measures
must accept any interference received, including interference that may cause undesired
EZ Code Type
Wa age
Voltage Kelvin CRI IP Ra ng Lumens
EZSH021850BR00
LED 18W 120Vac
5000 Cool
80+ IP 44 1600
EZSH021850WH00
LED 18W 120Vac
5000 Cool
80+ IP 44 1600
1.Make sure power is on, check circuit
breaker. If fixture is installed on a
switched circuit then check that switch
1.Power is off.
2.Test or replace switch.
2.Faulty switch (if on switched circuit)
Fuse blows on circuit breaker
or trips when light is turned on:
1. Crossed wires or power wire is
grounding out. black wire is not connected to ground.
Light will not turn
on.
3. Check wiring and verify that wire caps
4.Check circuit breaker for tripping.
Re-install fixture with proper silicone
4.Water seepage into fixture
Please scan below QR code for installaon video.
1.When the arrow on the “TEST / OFF / AUTO“ adjustment screw is at the “Test“ seng, the
dimming funcon is deacvated. If any movements are detected, the connected load is
switched on for “5“ seconds. The “Time“ funcon is deacvated under this seng.
2.The switch posion "AUTO" acvates the movement sensor funcon. The switch posion
"OFF" switches the LED light.
3. The sensor’s scope of detecon is between “10“ and “40“ (adjustable). The installaon
height should preferably be adjustable between “6“ and “8.3“ . The angle of
detecon is “150 °“.
4. When movement is detected, the operang period of the connected load is between “5“
seconds and “3“ minutes (adjustable). When new movements are detected during this original
operang period, the duraon is always lengthened by the amount of me set by the user.
Motion sensor functions:
/