Sonnet DuoModo Dual-Module Rackmount Enclosure Quick start guide
- Type
- Quick start guide
1. Adjust or remove the extension rails as necessary before installing
the enclosure.
2. Optional Step: Remove the cover plate.
If you purchased the enclosure separately and you are going to install two
modules, remove and set aside the four screws securing the cover plate
inside the enclosure, and then remove and set aside the cover plate; you
will not reuse these parts.
How to Prepare the Enclosure
Upper Mounting Pins
Lower Mounting Pins
1. Insert the modules until they stop.
2. Secure the modules.
How to Install Modules
1. Remove the screws.
2. Pull out the modules.
How to Remove Modules
©2021 Sonnet Technologies, Inc. All rights reserved. Sonnet, SONNETTECH, the Sonnettech logotype, and DuoModo, are trademarks of Sonnet Technologies,
Inc. Product specifications subject to change without notice. QS-DM-ENC-2M-R-E-A-042721
-
1
-
2
-
3
-
4
Sonnet DuoModo Dual-Module Rackmount Enclosure Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sonnet DuoModo Single-Module Desktop Enclosure Quick start guide
-
-
-
-
-
-
-
-
-
