Page is loading ...
LED STANDBY RECHARGEABLE FLASHLIGHT
Operation and Safety Notes
AMPERLED
S T A N D B Y
Frankfurter Landstraße 68 • 61440 Oberursel/ Germany • www.ampercell.com • [email protected]
Seite 2 von 5
Congratulations! With LED flashlight “STANDBY” you have purchased a high quality product.
Our products are manufactured to meet the highest standards of quality, functionality and
design.
We hope you enjoy your new Ampercell LED flashlight.
Before using the lamp, please read carefully following instructions:
Safety Advice
This product is only suitable for indoor use.
Life and accident risk to infants and children!
Never leave children
unsupervised with this product, it is not a toy.
Children or persons who lack knowledge or experience in handling with the appliance
or who are restricted in their physical, sensory or mental capabilities should not use
the appliance without supervision or instruction by a person responsible for their
safety.
Do not use the product if it is damaged.
Do not carry out any modifications or repairs to the product yourself.
LEDs cannot be replaced.
Seite 3 von 5
Description of Parts and Features
① Switch modes: ON/OFF mode for LED front light (flashlight)
② Optical coupler (light sensor)
③ Charging indicator light (red light)
④ Orientation/Night light (blue light)
⑤ LED Front light (white light)
Seite 4 von 5
Technical Data
LED Front Light
3 x Ø 5mm white LED (not replaceable)
Orientation /Night Light
1 x cube shape blue LED (not replaceable)
Charging Indicator Light
1 x Ø 5mm red LED (not replaceable)
Battery
1 x 3.6V 750 mAH Ni-MH battery (not replaceable)
Input: 100-240V, 50-60Hz
Output: 4.2V, 80mA
Charging time: 10-15 hours
Size
65(L) x 50(W) x 45(H) mm
Weight
142g (battery included )
Before Use
Battery charging
Battery must be charged at first before using the flashlight.
The first charge takes about 15 hours.
To charge the battery plug directly into a standard household socket with 220-230 V.
Recharging takes about 10-15 hours.
Charging indicator Light ③
The red light ③ on the side of the torch will be continuously ON during the charging
process.
The red light doesn’t switch off after complete charging.
Seite 5 von 5
Standby
Emergency Light ⑤
Setting the switch ① in “ON / STANDBY” mode during the charging, the front light ⑤
will switch ON automatically in case of power failure as emergency light.
Setting the switch in “OFF” mode during the charging, the emergency light will not be
running.
Orientation /Night Light ④
If the lamp is plugged into a standard socket, the blue light ④ will switch ON
automatically when it is dark and switch OFF when it is bright.
This function is triggered by the light sensor ②.
Use
Front Light ⑤
Set the switch ① to “ON / STANDBY” mode for continuous light as flashlight.
Slide the switch to “OFF” mode to turn off the front light.
Maintenance and cleaning
This product doesn’t require maintenance. LEDs and accu cannot be replaced.
Never immerse the product in water or other liquids.
Clean the product regularly with a dry, lint-free cloth. Use a slightly moist cloth to
remove any stubborn dirt.
Disposal
Environmental Protection Notice
At the end of its useful life, this product must not be disposed of together with normal
household waste, but has to be dropped off at a collection centre for the recycling of
electrical and electronic devices. This is indicated by the symbol on the product, on the
instruction manual and on the packaging.
The materials of which this product is made are recyclable pursuant to their labelling.
With the reuse, the recycling of the materials or other forms of scrap usage you are
making an important contribution to the protection of the environment.
/
