Dwyer Series SPPM User manual

Brand: Dwyer

Model: Series SPPM

Type: User manual

Dwyer Series SPPM, a weatherproof housing, safeguards your Series SPPM programmable panel meters from harsh elements and tampering. Designed for both indoor and outdoor use, its aluminum-glass construction boasts a NEMA 4X (IP66) enclosure rating, ensuring reliable protection. Effortless installation with captured screws simplifies mounting. Experience peace of mind knowing your panel meters are shielded from the elements, ensuring accurate readings in diverse environments.

Series SPPM-HSG Weatherproof Housing

Specifications - Installation and Operating Instructions

Bulletin PC-SPPM-HSG

The Series SPPM-HSG Weatherproof Housing was designed to

protect the Series SPPM programmable panel meters from weather and

tampering. Housings can be factory-configured for either 2.4˝ or 2.8˝

panel meters. For added flexibility, the brackets inside of the housing

can be reversed to fit the other display size. The top bracket swivels on

a hinge to allow access to wiring and the mini-USB port on the panel

meter.

Installation

Step 1) Remove the lid by loosening the four screws in the corners of

the lid (screws should stay captured in the lid).

Step 2) Mount the enclosure to the wall or duct.

Step 3) Unscrew the two screws on the bottom of the panel meter

mounting bracket only (as seen in Figure 1).

Step 4) Slide the panel meter through the center hole of the mounting

bracket.

Step 5) For the 2.4˝ model, lift the bottom of the mounting bracket so

that it swivels up exposing the rear of the panel meter (as seen

in Figure 2) and slide the mounting hardware over the rear of

the meter locking it in place.

Step 6) Bring the wire into the enclosure through the conduit hole at the

bottom of the housing and wire the panel meter according to its

instruction manual (Bulletin PC-SPPM).

Step 7) Replace the two screws on the bottom of the panel meter

mounting bracket.

Step 8) Re-attach the lid and tighten the four screws.

SPECIFICATIONS

Service: Indoor or outdoor.

Material: Painted aluminum and glass.

Enclosure Rating: NEMA 4X (IP66).

DWYER INSTRUMENTS, INC.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

MAINTENANCE/REPAIR

Upon final installation of the Series SPPM-HSG, no routine maintenance

is required. The Series SPPM-HSG is not field serviceable and should

be returned if repair is needed. Field repair should not be attempted and

may void warranty.

WARRANTY/RETURN

Refer to “Terms and Conditions of Sales” in our catalog and on our

website. Contact customer service to receive a Return Goods

Authorization number before shipping the product back for repair. Be

sure to include a brief description of the problem plus any additional

application notes.

REMOVE THESE

SCREWS TO LIFT

TOP PLATE.

SECTION A-A

107° RANGE

OF MOTION

Figure 1

Figure 2

-23/32

[

120]

-9/64

[

105]

-23/32

[

120]

-9/64

[

105]

7/8

[

Ø22]

-37/6

[

91]

-5/32

[30]

*Shown with Series SPPM Panel Meter sold seperately.

Dwyer Series SPPM User manual

Dwyer Series SPPM User manual

Dwyer Series SPPM User manual

Related papers

Other documents