Vitek VT-08HD2A-NH User guide

Type
User guide

This manual is also suitable for

Vitek On Cue App Quick Guide for iPhone
Use our DVR Networking Guide’ to network your DVR BEFORE attempting to use this
guide!!!
Step 1: Open App Store.
Step 2: Search for ‘Vitek’.
Step 3: Install the Vitek On Cue
Viewer.
Step 4: Open the On Cue Viewer.
Step 5: Click ‘DVR List’ and select
‘+ New’.
Step 6: Begin by entering a
‘Connection Name’. This can be
any name of your choice.
Step 7: Add the IP Address or
DDNS of your DVR. For example:
12.22.195.26.
Step 8: Enter the Port numbers
from the ‘Network’ page of your
DVR.
Step 9: Enter the ‘User Name’ and
‘Password’ for the DVR. The
default ‘User Name’ is ADMIN and
the default ‘Password’ is 1234
Step 10: Make sure none of the
fields were left blank, then hit
‘Save’.
Step 11: Back at the Viewer DVR
List, You should now see the DVR
you just added. Select it and press
Connect at the bottom.
Step 12: Connect to your DVR and
enjoy your Hi-Def cameras!
If you have any questions at all about this guide, or if you still haven’t had the chance to
Network your DVR, please checkout our Tech Support FAQ for illustrated guides on
whatever configuration questions you may have.
Tech Support F.A.Q.:
www.vitekcctv.com/Support.asp
VITEK Industrial Video Products, Inc.
Valencia CA, U.S.A.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Vitek VT-08HD2A-NH User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI