Sylvania SCR1206B-PL User manual

Sylvania
Brand
Sylvania
Model
SCR1206B-PL
Category
Alarm clocks
Type
User manual

This manual is also suitable for

Sylvania SCR1206B-PL Jumbo LED Display Clock Radio. This device features:

  • Alarms with adjustable volume, choice of buzzer or radio, and snooze function
  • Large, easy-to-read LED display
  • Sleep timer
  • FM radio with digital tuning and presets
  • Auxiliary input for connecting external audio devices
  • Battery backup to maintain time and alarm settings during power outages

Sylvania SCR1206B-PL Jumbo LED Display Clock Radio. This device features:

  • Alarms with adjustable volume, choice of buzzer or radio, and snooze function
  • Large, easy-to-read LED display
  • Sleep timer
  • FM radio with digital tuning and presets
  • Auxiliary input for connecting external audio devices
  • Battery backup to maintain time and alarm settings during power outages
MODEL NO. SCR1206B-PL
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
INSTRUCTION MANUAL
JUMBO LED DISPLAY CLOCK RADIO
2
This symbol, located on back or bottom of the unit, is
intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol, located on back or bottom of the unit, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
This product utilizes a Class 1 laser to read Compact
Discs. This laser Compact Disc Player is equipped with
safety switches to avoid exposure when the CD door
is open and the safety interlocks are defeated. Invisible
laser radiation is present when the CD Player’s lid
is open and the system’s interlock has failed or been
defeated. It is very important that you avoid direct
exposure to the laser beam at all times. Please do not
attempt to defeat or bypass the safety switches.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
To reduce the risk of electric shock, do not remove
cover (or back). There are no user-serviceable parts
inside. Please refer any servicing to qualified service
personnel.
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Warnings and Precautions
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
1. Read Instructions - All the safety and
operating instruction should be read before the
product is operated.
2. Retain Instructions - The safety and
operating instruction should be retained for
future reference.
3. Heed Warnings - All warning on the product
and in the operating instructions should be
adhered to.
4. Follow instructions - All operating and use
instructions should be followed.
5. Cleaning - Unplug this product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Clean only with a
dry cloth.
6. Attachments - Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
7. Water and Moisture - Do not use this product
near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet
basement, or near a swimming pool, and the
like. The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
apparatus.
8. Accessories - Do not place this product on
an unstable cart, stand tripod, bracket, or
table. The product may fall, causing serious
injury to a child or adult, and serious damage
to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use
a mounting accessory recommended by the
manufacturer.
9. A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
See figure:
10. Ventilation - Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instruction have been adhered
to.
11.
Power Sources - This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company. For products intended to operate
from battery power, or other sources, refer to
the operating instruction.
12. Grounding or Polarization - This product
may be equipped with a polarized alternating-
current line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarizes
plug.
Alternate Warnings - This product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
13. Power-Cord Protection - Power supply cords
should be routed so that they are not likely to
be walked on or pinched by items placed upon
or against them, paying particular attention to
cords at plugs, convenience receptacles, and
point where they exit from the product.
14. Protective Attachment Plug - The product
is equipped with an attachment plug having
overload protection. This is a safety feature.
See Instruction Manual for replacement or
resetting of protective device. If replacement
of the plug is required, be sure the service
technician has used a replacement plug
specified by the manufacturer that has the
same overload protection as the original plug.
15. Outdoor Antenna Grounding - If an
outside antenna is connected to the receiver,
be sure the antenna system is grounded
so as to provide some protection against
voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and
supporting structure, grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna-discharge unit, size
of grounding conductors, location of antenna-
discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
See figure:
16. Lightning - For added protection for this
product during a lightning storm, or when it
is left unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
17.
Power Lines - An outside antenna system
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might be
fatal.
18. Overloading - Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
19.
Object and Liquid Entry - Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
20. Servicing - Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.
21. Damage Requiring Service - Unplug
this product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
a) When the power-supply cord or plug is
damaged,
b) If liquid has been spilled, or objects have
fallen into the product,
c) If the product has been exposed to rain or
water,
d) If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
e) If the product has been dropped or
damaged in any way, and
f) When the product exhibits a distinct change
in performance - this indicates a need for
service.
22.
Replacement Parts - When replacement parts
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
23. Safety Check - Upon completion of any
service or repairs to this product, ask the
service technician to perform safety checks
to determine that the product is in proper
operating condition.
24. Wall or Ceiling Mounting - The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
25.
Heat - The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat. Battery shall not
be exposed to excessive heat such as sunshine,
fire, or the like.
26. Main plug is used as disconnect device and
it should remain readily operable during
intended use. In order to disconnect the
apparatus from the mains completely, the
mains plug should be disconnected from the
mains socket outlet completely.
27. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Important Safety Instructions
3
1. POWER, AL OFF & SOURCE BUTTON
2. VOLUME DOWN & ALARM ONE BUTTON
3. VOLUME UP & ALARM TWO BUTTON
4. SNOOZE, SLEEP & DIMMER BUTTON
5. TUNING DOWN & HOUR BUTTON
6. TUNING UP & MINUTE BUTTON
7. MEMORY & CLOCK SET BUTTON
8. PM INDICATOR
9. FM INDICATOR
LOCATION OF CONTROLS
4
1 2 3 4 5 6 7
8
9
10
11
12
13
14
15
16 17 18
10. AM INDICATOR
11. LED CLOCK & RADIO FREQUENCY
DISPLAY
12. ALARM ONE INDICATOR
13. ALARM TWO INDICATOR
14. SLEEP INDICATOR
15. SPEAKER
16. POWER JACK (AC ~9V/0.4A)
17. FM ANTENNA
18. BACKUP BATTERY COMPARMENT
(2 X 1.5V “AA” BATTERY) (Not Include)
POWER SOURCE
SETTING CLOCK
5
Plug the included AC/DC power adapter (120W/60Hz ~ 9V) into the POWER JACK
on the dock and an AC power outlet to power the dock.
The battery backup is intended for short power outages only. The clock radio’s primary
functions cannot run off of the battery backup alone.
Requires 2, AA Size, batteries (Not Include)
1.5V “AA” SIZE
1.5V “AA” SIZE
BATTERY BACKUP
1. In standby mode, press and hold the MEMORY & CLOCK SET BUTTON
2. The hours will blink. Press TUNING DOWN & HOUR BUTTON to set the current hour.
3. Press the TUNING UP & MINUTE BUTTON to set the current minute.
4. Press MEMORY & CLOCK SET BUTTON once and the current time is set.
NOTE: The PM indicator will light when the hour is set in the PM
SETTING SLEEP TIMER
When listening to radio, press SNOOZE, SLEEP & DIMMER BUTTON to enter sleep mode.
You can just adjust the sleep timer from 10 to 90 minutes by pressing the SNOOZE, SLEEP
& DIMMER BUTTON.
The unit will automatically turn off after the selected time expires.
PLAYING AM/FM RADIO
6
1. Press the POWER, AL OFF & SOURCE BUTTON to turn the clock radio on
2. Press the POWER, AL OFF & SOURCE BUTTON again to switch between the AM and
FM radio mode.
3. Press TUNING DOWN & HOUR BUTTON and TUNING UP & MINUTE BUTTON to
adjust the radio to desired frequency.
4. Press and hold the TUNING DOWN & HOUR BUTTON and TUNING UP & MINUTE
BUTTON to search for the next available frequency.
5. Press and hold the POWER, AL OFF & SOURCE BUTTON to turn the clock radio off.
Saving a Station as Preset
1. Follow the instructions for Tuning the AM or FM Radio.
2. Tune to the desired station
3. Press and hold the MEMORY & CLOCK SET BUTTON to save the current radio station
as a preset.
4. Press TUNING DOWN & HOUR BUTTON and TUNING UP & MINUTE BUTTON to
select the preset slot.
Tuning to a Preset Radio Station
1. Follow the instructions for Tuning the radio and saving a station as a preset.
2. Press the MEMORY & CLOCK SET BUTTON then Press TUNING DOWN & HOUR
BUTTON and TUNING UP & MINUTE BUTTON to select the preset slot to recall preset
radio stations.
Notes:
* Adjust the posistion of the FM antenna to improve FM Radio reception.
* An AM antenna is built into the clock radio. To improve AM radio reception, adjust the
position of the clock radio.
ALARM
Setting the Alarm
1. If in radio mode, press and hold the POWER, AL OFF & SOURCE BUTTON to turn the
unit off.
2. Press the VOLUME DOWN & ALARM ONE BUTTON or VOLUME UP & ALARM
TWO BUTTON.
3. Press the TUNING UP & HOUR BUTTON to adjust the hour.
*The PM indicator will light when the hour is set in the PM
4. Press the TUNING DOWN & MINUTE BUTTON to adjust the minute.
*The Alarm One or Alarm Two indicator will come on.
5. Press the VOLUME DOWN & ALARM ONE BUTTON or VOLUME UP & ALARM
TWO BUTTON repeatedly to switch between Radio (AM/FM), Buzzer (bb) or Off.
*If the alarm is set to Radio, use the VOLUME DOWN & ALARM ONE BUTTON or
VOLUME UP & ALARM TWO BUTTON to adjust the volume of the alarm.
6. Once the set alarm time is reached, the alarm will sound.
7. To set the other alarm, follow the above steps and choose the alarm not currently set.
Cancelling the Alarm
1. Follow the insurtcions for Setting the Alarm.
2. Press the VOLUME DOWN & ALARM ONE BUTTON or VOLUME UP & ALARM
TWO BUTTON repeatedly until the display show “OFF” and indicator will no longer lit.
When the Alarm sounds
Press SNOOZE, SLEEP & DIMMER BUTTON to delay for an additional 9 minntes.
Press POWER, AL OFF & SOURCE BUTTON to turn the alarm off until the set alarm time
is reached again.
CARE AND MAINTENANCE
SPECIFICATIONS
TROUBLESHOOTING GUIDE
S
y
m
p
t
o
m Possible Ca
us
Se
o
l
u
t
i
on
Noise or sound
distorted on AM or
FM broadcast
Station not tuned properly for AM
or FM.
FM: Telescopic antenna is not
fully extended.
AM: Internal antenna is not
positioned correctly
Fine tune the AM or FM
broadcast station.
FM: Fully extend the FM
Telescopic antenna.
AM: Reposition the unit until the
best reception is obtained.
AM or FM no sound
Volume at minimum
Increase Volume
7
1. Clean the unit with a soft, damp (never wet) cloth. Solvent or detergent should never
be used.
2. Avoid operating your unit under direct sunlight or in hot, humid or dusty places to
reduce the risk of fire or electric shock.
3. Keep your unit away from heating appliances and sources of electrical noise such
as fluorescent lamps or motors.
4. For better clock display clarity, avoid operating the unit under direct sunlight or in
strong room illumination.
5. Unplug the AC adapter from the unit and the electrical power outlet immediately in
case of malfunction.
Frequency:
AM 520 - 1710 kHz
FM 87.5 - 108 MHz
AC Adapter: Input - AC120V/60Hz 5W
Output - DC 5V 0.4A
Back-up Battery: 2 x DC 1.5V AA batteries
LIMITED PRODUCT WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workman-ship,
provided that the unit is used under the normal operating conditions intended by the manufacturer.
Should you have any problem with this product, please and it is highly recommended to visit our website at
www.curtisint.com before you take any other steps as we have additional copies of instruction manuals,
operating manuals and trouble shooting tips on our website which gives you the answer on most of the
questions you could have in operating the unit.
TERMS OF WARRANTY
C.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 90 days on
parts and 90 days on labor. If you originally purchased your product more than 90 days ago, a repair fee
may apply.
Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any items
placed in this product, whether due to any defect of the product, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), there are no other
warranties, conditions, representations or guarantees, express or implied, made or intended by C.I. or its
authorized distributors and all other warranties, conditions, representations or guarantees, including any
warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or
statue is hereby expressly excluded. Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service
Dept. (USA), shall not be responsible for any damages to persons or property, including the unit itself,
howsoever caused or any consequential damages arising from the malfunction of the unit and by the
purchase of the unit, the purchaser does hereby agree to indemnify and save harmless C.I. from any claim
for damages to persons or property caused by the unit.
TO OBTAIN REPAIRS UNDER THE TERMS OF THIS WARRANTY
1. The original purchaser must present a copy of the original bill of sale and the service warranty card.
2. Any alterations, abuse, misuse, battery corrosion or accidental damage voids the warranty.
3. The warranty does not cover cabinets and accessories.
4. No warranty or insurance contained or set out shall apply when damage or repair is caused by power
failure; damage in transit or when moving the unit; improper power supply; use for commercial or
industrial purposes; service calls resulting in customer education, etc.
5. The defective product should be mailed to:
Canada
U.S.A
C.I. Service Dept.
Curtis International Ltd
315 Attwell Drive
100 Lakeview Parkway
Toronto, Ontario
Vernon Hills, IL
M9W 5C1
60061
For service assistance and product information, please call: 1-800-968-9853.
If mailing the product, the freight must be prepaid and a money order for $7.00 should be included
to cover the cost of insurance and the return of the product.
6. C.I. reserves the right to repair or replace the parts which have become defective.
Model No.
Date Purchased
Serial No.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Sylvania SCR1206B-PL User manual

Sylvania
Brand
Sylvania
Model
SCR1206B-PL
Category
Alarm clocks
Type
User manual
This manual is also suitable for

Sylvania SCR1206B-PL Jumbo LED Display Clock Radio. This device features:

  • Alarms with adjustable volume, choice of buzzer or radio, and snooze function
  • Large, easy-to-read LED display
  • Sleep timer
  • FM radio with digital tuning and presets
  • Auxiliary input for connecting external audio devices
  • Battery backup to maintain time and alarm settings during power outages
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents