R82 Multi Frame Assembly Instruction

Type
Assembly Instruction

This manual is also suitable for

Monteringsvejledning (DK)
Ryg kstur til brug af Panda Futura str.3+4 på Multi Frame i motorkøretøj
Mounting instruction (GB)
Back xture when using Panda Futura sz.3+4 on Multi Frame in vehicle
Rev. 001 - 05.2014
9 9 9 6 0 9 7 7 1 3 8
Monteringsveiledning (N)
Ryggbeslag til bruk på Panda Futura str. 3+4 på Multi Frame i bil
Montage-handleiding (NL)
Rugbevestiging bij gebruik van Panda Futura maat 3 of 4 op Multi Frame in een voertuig
Instructions de montage (FR)
Attaches dorsales en cas d’utilisation de Panda Futura sz.3+4 sur Multi Frame dans un véhicule
取付方法 (JP)
バック・フィッティング取付と調整 *お車でPanda Futura付(サイズ3・4)Mulitiフレームをご使用時
Montageanweisung (D)
Rückenbefestigung des Panda Futura Gr. 3+4 auf dem Multi Frame
Montážní instrukce (CZ)
Kování při používání sedačky Panda Futura vel. 3+4 na Multi Frame ve vozidle
A
C
E
D
B
A
Mounting instruction
Back xture when using Panda Futura sz.3+4 on Multi Frame in vehicle
Follow the description below to mount the back fixture:
1. Dismount the plastic plugs located on the Multi Frame (A)
2. Dismount the headrest fitting (B)
3. Fasten the back fixture in the Multi Frame slide (C). Mount the upper
part of the back fixture on the back of the seat, together with fitting
(B) the enclosed 4 screws and 4 washers (D).
Use the bolts (E) to adjust the height and tighten afterwards!
4. Make sure to tighten all of the screws after the correct position is
achieved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

R82 Multi Frame Assembly Instruction

Type
Assembly Instruction
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages