LIPETY Foldable Ring Light User manual

  • Hello! I am an AI chatbot trained to assist you with the LIPETY Foldable Ring Light User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Foldable LED Ring Light Kit
Product Parameters:
1. The Ring Light
(1) Model: V36 plus (6) Light color: white light / warm light / mixed light
(2) Material: ABS + PC (7) Color rendering index: 80RA
(3) Lamp beads: 336pcs #2835 lamp beads (8) Output power: 48W
(4) Color temperature: 3000K- 6000K (9) Power input voltage: DC24V
(5) Lumen: 1500LM (10) Product size: Φ14.2 * 1.6inch
2. The Tripod Stand
(1) Style: reverse folding type + external heightened hose (2) Stand’s color: black
(3) Size: Folded -15.4", fully stretched -59", fully stretched & external hose-68.9"
Product Structure:
(1) Foldable, adjustable illumination angle (170-350°)
(2) 3 Pcs international standard 1/4 screw holes: support M1/4 screw accessories, such as mirror, gimbal.
(3) Dual USB output ports: support to charge your cellphone, the output is 5V 2A when single charging, and the output is
5V 1A when two interfaces are charged at the same time.
(4) 2 control knobs: one controls the color of the light, and the other one controls the brightness.
(5) 29 Pcs dissipate heat holes on its back: effective heat dissipation, longer service life.
Folded Front Back
Product Assembly:
1. Combine the cellphone holder to the hose:
2. Use of the Tripod Stand:
(1) Remove the folded tripod from the package.
(2) Loosen the fixing screw knob of the folded tripod.
(3) Hold the middle pole of the tripod with one hand, and pull out the stand legs with the other hand.
(4) Adjust the stand legs to the suitable angle, and fix the screw knobs of the stand legs.
(5) Loosen the screw knob of the middle pole, and stretch the middle pole to the height you need.
(6) Tighten the screws of the corresponding node to fix the height.
3. Combine the ring light to the tripod stand:
According to the diagram in the following figure, connecting the ring light, steering gimbal, heightened hose and bracket
to each other, and assemble them and power it, then it works.
Attention:
1. This is an electronic product. It is strictly forbidden to approach the fire source or throw it into fire.
2. It is strictly forbidden to artificially damage the product, such as score, impact, and dismantle without permission.
Package List:
1* power cord & adapter 3* phone holder & hose 1* foldable ring light 1* tripod stand & heightened hose
/