Miele cva 2650 Datasheet

Brand: Miele

Model: cva 2650

Category: Coffee making accessories

Type: Datasheet

This manual is also suitable for

TECHNICAL INFORMATION

CVA 2650, CVA 2652, CVA 2660, and CVA 2662 Coffee Systems

Technical Information

CVA 265x & CVA 266x

Table of Contents

A Warning and Safety Instructions ....................................................................... 7

1 General Information ......................................................................................... 7

2 Risk of Burning/Scalding ................................................................................. 7

B Modification History ............................................................................................ 7

C Technical Data ..................................................................................................... 8

1 Technical Data ................................................................................................ 8

2 Nespresso Capsule Overview ......................................................................... 9

D Layout of Electrical Components ...................................................................... 9

1 Appliance Overview (CVA 2650/2660) ............................................................ 9

2 Appliance Overview (CVA 2652/2662) .......................................................... 10

3  Electrical Components .................................................................................. 12

010 Casing ................................................................................................................ 14

2 Function ......................................................................................................... 15

2.1 Main Power (On/Off) Switch .............................................................. 15

2.2 Door Switch ....................................................................................... 15

2.3 Water Tank Level Switch ................................................................... 15

2.4 Drip Tray Contact Springs ................................................................. 15

2.5 Waste Container Optical Sensors ...................................................... 17

4 Service .......................................................................................................... 18

4.1 Appliance Removal for Service .......................................................... 18

4.2 Door Switch Removal ........................................................................ 18

4.3 Water Tank Level Switch Removal .................................................... 19

4.4 Placing Appliance in Service Setting ................................................. 20

4.5 Top Casing Removal ......................................................................... 22

4.6 Front Casing Removal ....................................................................... 22



4.7 Valve Housing Seal Removal ............................................................ 23

020 Door .................................................................................................................... 25

2  Function ......................................................................................................... 26

2.1 Optical Interface................................................................................. 26

2.2 Display Electronic (EPWZ 85x) .......................................................... 26

3  Fault Repair ................................................................................................... 26

3.1 Lighting Switches Itself Off ................................................................ 26

3.2 Stripes on Displays ............................................................................ 26

3.3 Cups Filled Unevenly ......................................................................... 27

3.4 Steam Not Available .......................................................................... 28

3.5 Switch Knobs Do Not Always Operate Correctly ............................... 28

3.6 Machine Operates Automatically, Beeps when Door is Opened ....... 29

3.7 Machine Whistles/Twitters/Squeaks during Rinsing or Dispensing ... 29

4 Service .......................................................................................................... 30

4.1 Setting the Portion Size (Water Quantity per Capsule) ..................... 30

4.2 Removing the Coffee Dispensing Nozzle .......................................... 31

4.3 Display Electronic Cover Removal .................................................... 31

4.4 Display Electronic Removal ............................................................... 32

4.5 Door Removal .................................................................................... 33

4.6 Hinge Removal .................................................................................. 33

4.7 Removing the Serving-Area LEDs ..................................................... 34

030  Component Bracket, Flow-Through Heaters, Pumps .................................... 35

Technical Information

CVA 265x & CVA 266x

1 Technical Data .............................................................................................. 36

2 Function ......................................................................................................... 37

2.1 Water Paths ....................................................................................... 37

4 Service .......................................................................................................... 39

4.1 Pressure Test .................................................................................... 39

4.2 Carrier Panel Removal ...................................................................... 39

4.3 Coffee/Hot-Water Heater (2R1) Removal .......................................... 42

4.4 Steam Heater (1R1) Removal ........................................................... 42

4.5 Coffee Hot-Water Pump (2M7) Removal ........................................... 42

4.6 Steam Pump (1M7) Removal ............................................................ 42

4.7 Flow Meter (B3/4) Removal ............................................................... 42

4.8 Decompression Vessel Removal ....................................................... 43

040  Containers, Drip Tray, Cappuccinatore ........................................................... 44

1  Technical Data .............................................................................................. 45

1.1 Capacities .......................................................................................... 45

2 Function ......................................................................................................... 45

2.1 Water Tank ........................................................................................ 45

2.2 Waste Container ................................................................................ 45

2.3 Drip Tray ............................................................................................ 45

3 Fault Repair ................................................................................................... 45

3.1 Milk Froth Unsatisfactory ................................................................... 45

3.2 Water Tank Drains Empty .................................................................. 47

4 Service .......................................................................................................... 48

4.1 Cappuccinatore Assembly ................................................................. 48

050  Brew Unit, Capsule Magazine, DC Motors, Valves ......................................... 49

1 Technical Data .............................................................................................. 50

1.1 Motor Voltages................................................................................... 50

2 Function ......................................................................................................... 50

2.1 Initializing ........................................................................................... 50

2.2 Capsule Magazine Optical Sensor .................................................... 50

2.3 Brewing Procedure ............................................................................ 50

3 Fault Repair ................................................................................................... 52

3.1 Capsule Magazine Drawer Can’t Be Removed from Appliance ........ 52

4 Service .......................................................................................................... 52

4.1 Brew Unit Removal ............................................................................ 52

4.2 Brew Unit Motor Removal .................................................................. 53

4.3 Ceramic Valve Removal .................................................................... 54

4.4 Steam Valve Removal ....................................................................... 55

4.5 Capsule Magazine Motor Removal .................................................... 56

4.6 Capsule Transport Motor Removal .................................................... 56

4.7 Intermediate Plate Assembly Removal .............................................. 58

4.8 Capsule Magazine Optical Sensor Removal ..................................... 59

060 Power Electronic, Interference Suppression Filter, Connection Cable........ 60

2  Function ......................................................................................................... 61

2.1 Appliance Status after a Power Failure ............................................. 61

2.2 EPL 85x Power Electronic - Plug and Pin Connections ..................... 61

3  Fault Repair ................................................................................................... 63

3.1 Display Message Summary ............................................................... 63

3.2 Fault Code Summary ......................................................................... 64

3.3 Fault Code F1 .................................................................................... 64



Technical Information

CVA 265x & CVA 266x

3.4 Fault Code F2 .................................................................................... 65

3.5 Fault Code F3 .................................................................................... 65

3.6 Fault Code F4 .................................................................................... 65

3.7 Fault Code F10 .................................................................................. 65

3.8 Fault Code F17 .................................................................................. 66

3.9 Fault Code F42 .................................................................................. 67

3.10 Fault Code F45 .................................................................................. 67

3.11 Fault Code F47 .................................................................................. 67

3.12 Fault Code F71 .................................................................................. 67

3.13 Fault Code F72 .................................................................................. 67

3.14 F72, F71, F75, F76 (CVA 2650/2660 Only) ....................................... 70

3.15  Fault Code F73 .................................................................................. 70

3.16 Fault Code F74 .................................................................................. 71

3.17  Fault Code F75 .................................................................................. 71

3.18  Fault Code F76 .................................................................................. 72

3.19  Fault Code F77 .................................................................................. 72

3.20  Fault Code F80 .................................................................................. 72

3.21  Fault Code F81 .................................................................................. 73

3.22 Fault Code F82 .................................................................................. 73

3.23  Fault Code F83 .................................................................................. 73

3.24 “Please Insert Drip Tray” is Displayed (Drip Tray Installed) ............... 74

3.25 “Please Empty Drip Tray” is Displayed (Drip Tray Not Full) .............. 75

3.26  “Warming Up - Please Wait” is Displayed, Even Though Appliance is

Ready for Operation .......................................................................... 76

3.27  “Please Close the Door” is Displayed (Door is Closed) ..................... 76

3.28  Descaling Cannot Be Reset in Service Mode .................................... 76



3.29  Appliance Is in Standby Mode and Cannot Be Switched On Again ... 77

3.30  Descaling is Interrupted ..................................................................... 77

4  Service .......................................................................................................... 77

4.1 Customer Programming ..................................................................... 77

4.2 Capsule Cage Replacement .............................................................. 82

4.3 Temperature Adjustment for Espresso, Coffee and Hot Water ......... 83

4.4 Service Programming (CVA 2652/2662 Only) ................................... 83

4.5 Service Mode Summary .................................................................... 84

4.6 Pressure Test .................................................................................... 90

4.7  Power Electronic Removal ................................................................. 93

4.8 Wiring Diagrams ................................................................................ 94

Technical Service Bulletins .......................................................................................... 96

1  Troubleshooting Tips for CVA 26XX Cappuccinatore Froth Problems .......... 96

2  Power Electronic TRIAC Failure .................................................................... 97

3  CVA & French Roast Coffee ......................................................................... 98

4  CVA Replacement Coffee Grinders .............................................................. 98

5 Understanding Coffee System Temperature Fuses ...................................... 99

Technical Information

CVA 265x & CVA 266x

List of Figures

Figure D-1: CVA 2650/2660 Appliance Overview (Front) ................................................. 9

Figure D-2: CVA 2650/2660 Appliance Overview (Front Door Open) ............................. 10

Figure D-3: CVA 2652/2662 Appliance Overview (Front) ............................................... 10

Figure D-4: CVA 2652/2662 Appliance Overview (Front Door Open) ............................. 11

Figure D-5: Component Overview (CVA 2650/2660) ...................................................... 12

Figure D-6: Component Overview (CVA 2652/2662) ...................................................... 13

Figure 010-1: Drip Tray Contact Springs ........................................................................ 16

Figure 010-2: Drip Tray Contacts .................................................................................... 16

Figure 010-3: Appliance Retaining Screws ..................................................................... 18

Figure 010-4: Door Switch .............................................................................................. 19

Figure 010-5: Water Tank Level Switch Removal ........................................................... 20

Figure 010-6: Top Casing Retaining Screws .................................................................. 21

Figure 010-7: Top Casing in the Service Position ........................................................... 21

Figure 010-8: Top Casing Removal ................................................................................ 22

Figure 010-9: Front Casing Retaining Screws ................................................................ 23

Figure 010-10: Valve Housing Seal Removal ................................................................. 24

Figure 020-1: Optical Interface Location ......................................................................... 26

Figure 020-2: Coffee Dispensing Nozzle Removal ......................................................... 31

Figure 020-3: Display Electronic Cover Removal (CVA 2650/2660 Shown) ................... 31

Figure 020-4: Display Electronic Removal, CVA 2650/2660 ........................................... 32

Figure 020-5: Display Electronic Removal, CVA 2652/2662 ........................................... 32

Figure 020-6: Door Retaining Screws ............................................................................. 33

Figure 020-7: Hinge Retaining Screws ........................................................................... 33

Figure 020-8: Removing the Serving-Area LEDs (CVA 2650/2660 shown) .................... 34

Figure 030-1: Water Path – Overview of Components ................................................... 37

Figure 030-2: Carrier Panel Retaining Screws ................................................................ 39

Figure 030-3: Hose Connections .................................................................................... 40

Figure 030-4: Component Locations on Carrier Panel .................................................... 41

Figure 040-1: Steam Valve Positions .............................................................................. 46

Figure 040-2: Cappuccinatore Components ................................................................... 48

Figure 050-1: Brewing Procedure ................................................................................... 51

Figure 050-2: Releasing the Capsule Magazine Drawer ................................................ 52

Figure 050-3: Brew Unit and Retaining Screws .............................................................. 53

Figure 050-4: Brew Unit Motor Assembly ....................................................................... 54

Figure 050-5: Ceramic Valve .......................................................................................... 54

Figure 050-6: Steam Valve Assembly ............................................................................. 55

Figure 050-7: Capsule Magazine Motor Assembly ......................................................... 56

Figure 050-8: Capsule Transport Motor Assembly ......................................................... 57

Figure 050-9: Capsule Transport Motor Assembly Components .................................... 57

Figure 050-10: Intermediate Plate Assembly .................................................................. 58

Figure 050-11: Capsule Magazine Optical Sensor ......................................................... 59

Figure 060-1: EPL 85x Connectors and Pin Locations ................................................... 61

Figure 060-2: Ceramic Valve Hose Connections ............................................................ 66

Figure 060-3: Capsule Transport Assembly .................................................................... 68

Figure 060-4: Modified Capsule Transport Arm with 55° Bezel (2650/2660) .................. 69

Figure 060-5: Grease ...................................................................................................... 70

Figure 060-6: Base Plate Removal ................................................................................. 75

Figure 060-7: Contact Springs in Housing ...................................................................... 75

Technical Information

CVA 265x & CVA 266x

Figure 060-8: Pressure-Measuring Instrument Set ......................................................... 90

Figure 060-9: Capsule Plate and Rubber Insert .............................................................. 91

Figure 060-10: Connection Piece and Holding Bracket .................................................. 91

Figure 060-11: Pressure-Measuring Instrument and Valve ............................................ 92

Figure 060-12: Removing the Power Electronic .............................................................. 93

Figure 060-13: CVA 2650/2660 Wiring Diagram ............................................................. 94

Figure 060-14: CVA 2652/2662 Wiring Diagram ............................................................. 95

List of Tables

Table C-1: Technical Data ................................................................................................ 8

Table C-2: Nespresso Capsule Overview ......................................................................... 9

Table 020-1: Grinding Grades ......................................................................................... 27

Table 020-2: Drink Sizes, CVA 2650/2660 ..................................................................... 30

Table 020-3: Drink Sizes, CVA 2652/2662 ..................................................................... 30

Table 030-1: Heater Data ................................................................................................ 36

Table 030-2: Pump Data ................................................................................................. 36

Table 030-3: Flow Meter Data ......................................................................................... 36

Table 040-1: Container Capacities .................................................................................. 45

Table 050-1: Motor Technical Data ................................................................................. 50

Table 060-1: EPL 85x Power Electronic Plug and Pin Connections ............................... 62

Table 060-2: Display Message Summary ....................................................................... 63

Table 060-3: Fault Code Summary ................................................................................. 64

Table 060-4: Customer Programming, CVA 2650/2660 ................................................. 79

Table 060-5: Customer Programming, CVA 2652/2662 ................................................. 82

Table 060-6: Water Hardness Settings ........................................................................... 82

Table 060-7: Service Programming, CVA 2652/2662 ..................................................... 84

Table 060-8: Service Functions, CVA 2650/2660 ........................................................... 86

Table 060-9: Capsule Magazine Check .......................................................................... 86

Table 060-10: Brew Unit Display Codes ......................................................................... 86

Table 060-11: Flow Meter Pulse Rates ........................................................................... 87

Table 060-12: Sensor/Switch Check Reference ............................................................. 87

Table 060-13: Service Functions, CVA 2652/2662 ......................................................... 89

Table 060-14: Brew Unit Position Sensor (B10) Display Codes ..................................... 90

Table 060-15: Flow Meter Pulse Rates ........................................................................... 90

Technical Information

CVA 265x & CVA 266x

A Warning and Safety Instructions

1 General Information

Service should only be performed by qualified personnel.

Follow all applicable regulations and codes during service.

Disconnect the appliance from the main power supply by shutting off the

appropriate circuit breaker or by unplugging the appliance before service.

Note:

Remove the water tank, waste container, drip tray and capsule magazine

drawer from the appliance before service.

2 Risk of Burning/Scalding

Components may be hot.

Pressurized steam may be present within certain components.

To avoid the risk of burns:

 If possible, switch off the appliance about 1 hour before performing any

service procedures; this will allow the heaters to cool or

 To cool the heaters, pump water through the system for about 30

seconds using the service mode (without heat).

B Modification History

When? Who? What?

1/30/2012 Jessica Naples Tech service bulletins added

9/19/2011 Jessica Naples CVA 2652/2662 service mode corrected

12/3/2009 Jessica Naples CVA 2652/2662 information added

9/00/2004 Miele USA Updated for US use

8/00/2004 Miele USA Initial conversion to English

Technical Information

CVA 265x & CVA 266x

C Technical Data

1 Technical Data

Model CVA 2650/2652 CVA 2660/2662

Type

Built-in

Appliance dimensions

Height 13.8” (35cm)

Width 19.7” (50cm) 23.6” (60cm)

Depth 11.8” (30cm)

Niche dimensions (tall cabinet)

Height 14.2” (36cm)

Width 18.1” – 18.4” (46 – 46.8 cm) 22.0” – 22.4” (56 – 56.8 cm)

Depth  12.2” (31cm)

Niche dimensions (wall unit)

Height  13.8” (35cm)

Width 18.1” – 18.4” (46 – 46.8 cm) 22.0” – 22.4” (56 – 56.8 cm)

Depth  12.2” (31cm)

Weight

37.0 lbs (16.8kg) 41.4 lbs (18.8kg)

Electrical requirements

120 VAC (60Hz) 15A breaker

Rated load

2.3kW maximum

Standby consumption

Main switch-off 0.12W

Off via touchpad, display off 0.9W

Off via touchpad, display on 2.5W

Power cord/connection

6 ft equipped with NEMA 5-15P plug

Door hinge

Left only

Water tank capacity

1.5 liters (0.4 gallons)

Waste container capacity

40 capsules (indication at 20 capsules)

Capsule magazine capacity

5 positions / 4 capsules each position (20 total)

Drip tray capacity

0.8 liters (0.2 gallons); indicator at 0.4 liters (0.1 gallons)

Drink temperatures

At flow-through heater

See Section 060-4.4.

At outlet

Espresso (°C) 86 ± 3

Coffee (°C) 86 ± 3

Table C-1: Technical Data

Ensure that the cabinet and the wall can support the weight of the appliance.

CVA 2652/2662 only.

Measure the temperature 1 cm under the outlet, not in the cup.

Technical Information

CVA 265x & CVA 266x

2 Nespresso Capsule Overview

Range Name/Type Capsule Colo

Strength Ideal Cup Size

Espresso

Ristretto Black

1/2 espresso cup (25mL)

Espresso cup (40mL)

Ideal for making cappuccino

Arpeggio Dark blue

1/2 espresso cup (25mL)

Espresso cup (40mL)

Ideal for making cappuccino

Roma Gray

1/2 espresso cup (25mL)

Espresso cup (40mL)

Ideal for making cappuccino

Decaf Intenso Dk. red (maroon)

7 Espresso cup (40mL)

Livanto Bronze (copper)

6 Espresso cup (40mL)

Capriccio Dk. green

5 Espresso cup (40mL)

Volluto Gold

4 Espresso cup (40mL)

Cosi Brown

3 Espresso cup (40mL)

Decaffeinato Red

2 Espresso cup (40mL)

Lungo

Vivalto Light blue

6 Large cup (110mL)

Decaf Lungo Red

5 Large cup (110mL)

Finezzo

Pale yellow

4 Large cup (110mL)

Table C-2: Nespresso Capsule Overview

D Layout of Electrical Components

1 Appliance Overview (CVA 2650/2660)

Figure D-1: CVA 2650/2660 Appliance Overview (Front)

Left display

Drain grill

Left control dial

Drip tray cover

Right control dial

Coffee spout

Right display

Inset for cappuccinatore

Upper door handle

Steam/hot-water valve

Lower door handle

Technical Information

CVA 265x & CVA 266x

Figure D-2: CVA 2650/2660 Appliance Overview (Front Door Open)

Main switch

Carousel runners

Capsule plate

Water container

Perforator (not visible)

Drip tray (w/ grid)

Capsule carousel

Waste container

2 Appliance Overview (CVA 2652/2662)

Figure D-3: CVA 2652/2662 Appliance Overview (Front)

On/off touch control

Door grip

Display

Plastic drip tray

Left arrow

Metal drip tray

OK touch control

Coffee spout

Right arrow

Inset for cappuccinatore

Drink selection touch control

Steam/hot-water valve

Technical Information

CVA 265x & CVA 266x

Figure D-4: CVA 2652/2662 Appliance Overview (Front Door Open)

Main switch

Carousel runners

Capsule plate

Water container

Brew unit

Drip tray (w/grid)

Capsule carousel

Waste container

Technical Information

CVA 265x & CVA 266x

3 Electrical Components

Figure D-5: Component Overview (CVA 2650/2660)

Door switch (S4)

Flow meter (B3/4)

Display electronic (EPWZ) (N5)

Waste container optical sensor (receiver) (N1)

Water tank level switch (S7)

Coffee/hot-water pump (2M7) w/temp. limiter (4F1)

Brew unit position encoder (E1)

Steam pump (1M7) w/ temp. limiter (3F1)

Brew unit motor (M2)

Steam NTC (1R30)

Capsule magazine motor (M4)

Steam heater (1R1)

Capsule magazine switch (motor) (S6)

Steam heater fuse (1F8)

Capsule magazine switch (drawer) (S5)

Steam heater temperature limiter (1F1)

Serving-area lights (LED1/1 & 1/2)

Interference suppression filter (Z1)

Capsule magazine optical sensor (N3)

Coffee/hot-water heater fuse (3F8)

Drip tray level sensor contact spring (S9)

Coffee/hot-water heater (2R1)

Waste container optical sensor (transmitter) (N2)

Coffee/hot-water heater fuse (2F8)

Drip tray present sensor contact spring (S8)

Coffee/hot-water NTC (2R30)

Main power switch (S10)

Capsule transport motor (M3) w/ switch (S11)

Steam valve switch (S1)

Power electronic (EPL) (N4)

Ceramic valve (M1) w/valve position switch (S2)

and reference switch (S3)

Not

shown

Transformer (T1) - not on all models

Technical Information

CVA 265x & CVA 266x

Figure D-6: Component Overview (CVA 2652/2662)

Door switch (S24)

Flow meter (B3/4)

Display electronic (EPWZ) (N5)

Waste container optical sensor (receiver) (1B3/16)

Water tank level switch (S12/1)

Coffee/hot-water pump (2M7) w/ temp. limiter (2F3)

Position sensor (B10)

Steam pump w/ temp. limiter (1F3) (1M7)

Brew unit motor (M26)

Steam NTC (1R30)

Capsule magazine motor (M31)

Steam heater (1R1)

Capsule magazine switch (step contact) (S51/2)

Steam heater fuse (1F8)

Capsule magazine switch (monitoring) (S87/3)

Steam heater temperature limiter (F1/5)

Serving-area lights (1H3 & 2H3)

Interference suppression filter (Z1)

Capsule magazine optical sensor (B3/15)

Coffee/hot-water heater temp. limiter (F1/8)

Drip tray present sensor contact spring (S12/2)

Coffee/hot-water heater (2R1)

Waste container optical sensor (transmitter) (2B3/16)

Coffee/hot-water heater fuse (2F8)

Drip tray monitoring switch (S9)

Coffee/hot-water NTC (2R30)

On/off switch (S2)

Capsule transport motor (M30) w/ switch (S51/3)

Steam generator monitoring switch (S79)

Power module (EPL) (N4)

Ceramic valve (M29) w/ valve position switch (S60/3)

and reference switch (S51/1)

Display module (N6)

Technical Information

CVA 265x & CVA 266x

010 Casing

Technical Information

CVA 265x & CVA 266x

2 Function

2.1 Main Power (On/Off) Switch

The main power switch is located on the front left of the casing; see Figure D-5

or D-6, Item 14.

Danger!

Even with the switch set to 0 (“off”), voltage remains applied to some

components.

Setting 0: Power module EPL 850 (N4) disconnected from power supply.

Setting 1: Power module EPL 850 (N4) connected to power supply.

If the clock time has been previously set, then after power is switched on

again Please set the time of day is displayed.

2.2 Door Switch

The door switch is located on the front right of the casing; see Figure D-5 or

D-6, Item 1. The associated magnet is installed in the door.

The door switch monitors whether the door is open or closed. If the door is

open, Please close the door is displayed.

The door switch can be checked in the service mode; see Section 060-4.5.

2.3 Water Tank Level Switch

The water tank level switch is located on the right of the casing bottom part;

see Figure D-5 or D-6, Item 3.

The associated magnet is installed in the water tank float.

The water tank level switch monitors the following:

 Whether the water tank is inserted.

 Whether the water tank is sufficiently full.

When the water level drops below a certain quantity (500 milliliters), the

magnet in the float activates the water tank level reed switch. The quantity of

water consumed after the reed switch has activated is registered via the flow

meter and saved by the power module. At the latest, when the water quantity

remaining is only 200 milliliters or after the door is opened, Please fill and

replace the water container is displayed.

The water tank level switch can be checked in the service mode; see Section

060-4.5.

2.4 Drip Tray Contact Springs

The drip tray contact springs are in the housing (Figure 010-1). They consist

of 2 springs to monitor if the drip tray is present (Item 1) and 1 spring to

monitor the level of residual water in the tray (Item 2).

Technical Information

CVA 265x & CVA 266x

Figure 010-1: Drip Tray Contact Springs

The two associated contacts are on the rear of the drip tray (Figure 010-2).

The power electronic registers whether the drip tray is present via the left

contact (Figure 010-2, Item 1)

and the two “drip tray present” contact springs

(Figure 010-1, Item 1). When 13.5 fluid ounces (400 milliliters) residual water

is in the drip tray, both contacts (Figure 010-2, Items 1 and 2) touch the

water. The power electronic then detects a level of conductivity via the drip

tray level contact (Figure 010-1, Item 2) and registers that the drip tray is full.

The message Please empty drip tray is displayed.

Figure 010-2: Drip Tray Contacts

The drip tray present contact springs and the drip tray level contact spring

can be checked in the service mode; see Section 060-4.5.

Technical Information

CVA 265x & CVA 266x

Note:

If Please empty drip tray is still displayed after the drip tray has been

emptied and replaced, see Section 060-3.25.

2.5 Waste Container Optical Sensors

There are two electronic components for the waste container light barrier: the

infrared transmitter and the receiver. They are located above the waste

container, in the casing bottom part; see Figure D-5 or D-6, Items 12 and 18.

The waste container optical sensors monitor the following:

 Whether the waste container is installed.

 Whether the waste container is full.

 Whether the capsule for the last coffee dispensed has fallen out of the

brew unit.

When a capsule falls into the waste container, the light barrier is interrupted

and this is registered by the power electronic. The number of capsules is thus

counted and when the number reaches 20 or when a capsule permanently

interrupts the light barrier, Please empty waste container and then replace

it is displayed.

Always remove the waste container for at least 3 seconds to ensure that the

electronic registers it as empty and the counter is reset to zero.

If the full

container is reinserted after 3 seconds and an ejected capsule breaks the

light barrier, Please empty waste container and then replace it will be

displayed again.

The waste container optical sensors can be checked in the service mode; see

Section 060-4.5.

Technical Information

CVA 265x & CVA 266x

4 Service

4.1 Appliance Removal for Service

Note:

Before any service work is started, the water tank, waste container, drip

tray with wave damper and drawer with capsule magazine must be

removed from the appliance.

1. Loosen the four T20 retaining screws (Figure 010-3, Item 1).

2. Slide the appliance out of the cabinet.

3. Disconnect the power connection.

Figure 010-3: Appliance Retaining Screws

Danger!

Risk of burning or scalding!

Components may be hot.

Pressurized steam may exist in the system.

To avoid the risk of burning, the following should be carried out:

 The appliance should be shut off approximately 1 hour before starting

service and repair work to allow the flow-through heaters to cool or

 Using the service mode, water should be pumped through the flow-

through heaters for approximately 30 seconds to cool them; see Section

060-4.5.

4.2 Door Switch Removal

1. Remove the appliance for service; see Section 010-4.1.

2. Remove the right side panel.

3. Remove the right cover; see Figure 010-4, Item 2.

4. Disconnect the connection plug; see Figure 010-4, Item 1.

5. Remove the door switch; see Figure 010-4, Item 3.

Technical Information

CVA 265x & CVA 266x

Figure 010-4: Door Switch

4.3 Water Tank Level Switch Removal

1. Remove the appliance for service; see Section 010-4.1.

2. Remove the right side panel.

3. Disconnect the connection plug (Figure 010-5, Item 1).

4. Remove the water tank level switch (Figure 010-5, Item 2).

1 Connection plug

2 Right cover

3 Door reed switch

Technical Information

CVA 265x & CVA 266x

Figure 010-5: Water Tank Level Switch Removal

4.4 Placing Appliance in Service Setting

1. Remove the appliance for service; see Section 010-4.1.

2. Remove the left and right side panels.

3. Remove the rear panel.

4. Remove the top casing retaining screws (Figure 010-6, Items 2 and 3).

Note:

The screws have different lengths. Take care to note where the longer

screws (Figure 010-6, Item 3) are located to avoid damage to the casing

during reassembly.

5. Remove the connection cable (Figure 010-6, Item 1) from its groove.

6. Slide the transformer up from its support (if applicable).

7. Pull the top casing back.

Page is loading ...

Miele cva 2650 Datasheet

Brand: Miele

Model: cva 2650

Category: Coffee making accessories

Type: Datasheet

This manual is also suitable for

Download PDF

report

Miele cva 2650 Datasheet

This manual is also suitable for

Miele cva 2650 Datasheet

Related papers

Other documents