EAW Speaker KF910 User manual

EAW
Brand
EAW
Model
Speaker KF910
Category
Loudspeakers
Type
User manual

This manual is also suitable for

EAW Speaker KF910 is a dedicated PPST long throw high frequency system in a trapezoidal enclosure. It includes 5x 2-in exit compression drivers on SimplePhase™ horns. Engineered for use in KF900 Series arrays, it provides HF coverage from 0° to 15° below the array. With an extended high frequency response, it can reach distances in excess of 600 ft. The KF910 has an efficiency of 117 dB SPL, a peak output of 153 dB SPL, and a nominal coverage angle of 30°. It features a trapezoidal enclosure made of Baltic birch plywood with a black catalyzed polyurethane finish.

EAW Speaker KF910 is a dedicated PPST long throw high frequency system in a trapezoidal enclosure. It includes 5x 2-in exit compression drivers on SimplePhase™ horns. Engineered for use in KF900 Series arrays, it provides HF coverage from 0° to 15° below the array. With an extended high frequency response, it can reach distances in excess of 600 ft. The KF910 has an efficiency of 117 dB SPL, a peak output of 153 dB SPL, and a nominal coverage angle of 30°. It features a trapezoidal enclosure made of Baltic birch plywood with a black catalyzed polyurethane finish.

SPECIFICATIONS KF910
PHYSICAL
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF910/888056(A)/2 pp 1/29/99 Printed in USA
DESCRIPTION
PERFORMANCE
APPLICATION
A dedicated PPST long throw high frequency system in a
trapezoidal enclosure. Includes 5x 2-in exit compression driv-
ers on SimplePhase™ horns.
The KF910 PPST long throw HF module is engineered for use
in KF900 Series arrays. It provides HF coverage from 0° to 15°
below the array. It is engineered to provide extended high fre-
quency response at distances in excess of 600 ft. KF900 Series
modules can only be used in arrays and must be integrated
with complex PPST processing. Six year warranty.
Applications include:
Stadiums Concert Tours
Frequency Response (1 Watt @ 1m)
±3 dB 500 Hz to 14 kHz
-10 dB 400 Hz to 2 16 khz
Efficiency/Axial Sensitivity (dB SPL, 1 Watt @ 1m)
HF 117
Impedance (Ohm)
HF 5x 8
Power Handling, AES Standard (Watts)
HF 5x 200
Recommended Amplifier Power (Watts)
HF 5x 400
Calculated Maximum Output (dB SPL)
HF Peak 153.0
HF Long Term 146.0
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 30
Vertical Beam profile adjustable via PPST
processing
Recommended Complementary Systems
Sub KF940
LF KF930
Mid/High KF920/KF911
Part Number 999522
HF Subsystem & Loading 5X 2-in exit compression drivers
on 30° (H) SimplePhase horns
System Configuration Dedicated HF, long throw
Powering Configuration Active processing
System Crossover 800 Hz to 1300 Hz
Controls (switches, knobs) None
Recommended High-Pass
Frequency (24 dB/Octave) 1250 Hz, 500 Hz minimum
Cabinet Type (shape) Trapezoidal
Enclosure Materials Baltic birch plywood
Finish Black catalyzed polyurethane
Connectors One each male and female AP6,
2x Neutrik NL4 Speakon
Suspension Hardware (16) 3/8”-16 threaded mounting
suspension points (4 each top,
bottom and sides)
Grille Vinyl coated perforated steel,
foam backed
Dimensions inches millimeters
Height 46.00 1168
Width (Front) 30.00 762
Width (Rear) 8.56 217
Depth 40.00 1016
Trapezoid Angle 15° per side
Weights pounds kilograms
Net Weight 288 131.0
Shipping Weight 293 133.3
Prototype shown with temporary hardware
SPECIFICATIONS KF910
DIMENSIONAL DRAWING
INPUT PLATE
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF910/888056(A)/2 pp 1/29/99 Printed in USA
Manufacturing tolerances are +/-0.13 and +/-1°
15.83
7.00
4.50
8.58
23.00
18.25
30º
40.00
30.00
42.00
46.00
10.81
8.58
8.75
16.75
22.00
KF910
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED
FRONT
BACK
TOP
RIGHT SIDE/VIEW A-A
A
A
510497 (1)
EXP 9/4/97 SHB
The long throw high frequency module shall incorporate 5x
horn-loaded 2-in exit compression driver HF transducers. The
module shall have a nominal horizontal coverage pattern of
30°. The module’s vertical beam profile shall be adjustable via
complex digital signal processing. The module shall be inte-
grated with complementary frequency-specific modules into a
single acoustical unit via complex digital signal processing.
Module frequency response shall vary no more than ±3 dB
from 500 Hz to 14 kHz measured on axis. The module shall
produce a Sound Pressure Level (SPL) of 117 dB SPL on axis
at 1 meter with a power input of 1 Watt, and shall be capa-
ble of producing a peak output of 153 dB SPL on axis at 1
meter. Each driver shall handle 200 Watts of amplifier power
(AES Standard) and shall have a nominal impedance of 8
Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 1/2-in thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed
polyurethane. Input connectors shall be one each male and
female AP6 plus two Neutrik NL4 Speakon. The enclosure shall
include sixteen 3/8”-16 threaded mounting/suspension
points (4 each top, bottom and sides). The front of the loud-
speaker shall be covered with a vinyl coated perforated steel
grille backed with open cell foam to protect against dust.
The long throw high frequency module shall be the EAW model
KF910.
470540 (A) KF910
KF910
S/N
PIN 1
PIN 1
HF D
HF D
- ...
+...
--
+
PIN 2
PIN 2
HF E
HF E
- ...
+...
--
+
CANNON
1
2
3
4
5
6
CANNON
1
2
3
4
5
6
PIN 1
PIN 2
HF A
HF A
...
...
--
+
PIN 5
PIN 6
HF C
HF C
...
...
--
+
PIN 3
PIN 4
HF B
HF B
...
...
--
+
NEUTRIK
NL 4 MPR
NEUTRIK NEUTRIK
NL 4 MPR
NEUTRIK
AP6-FEMALE
AP6-MALE
  • Page 1 1
  • Page 2 2

EAW Speaker KF910 User manual

EAW
Brand
EAW
Model
Speaker KF910
Category
Loudspeakers
Type
User manual
This manual is also suitable for

EAW Speaker KF910 is a dedicated PPST long throw high frequency system in a trapezoidal enclosure. It includes 5x 2-in exit compression drivers on SimplePhase™ horns. Engineered for use in KF900 Series arrays, it provides HF coverage from 0° to 15° below the array. With an extended high frequency response, it can reach distances in excess of 600 ft. The KF910 has an efficiency of 117 dB SPL, a peak output of 153 dB SPL, and a nominal coverage angle of 30°. It features a trapezoidal enclosure made of Baltic birch plywood with a black catalyzed polyurethane finish.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers