Fluance RT80 Classic High Fidelity Vinyl Turntable User manual
- Type
- User manual
Turntable Connection Guide
Turntable + Preamp +
Amplifier + Passive Speakers
Turntable + Preamp +
Powered Speakers
Amplifier (required)
RCAGND
Speaker Wire
Preamp*
Speaker Wire
Preamp*
RCAGND
GND**
*Some Turntables (RT80/RT81) have a Built-in Preamp (Line Output) and some Amplifiers/Speakers have a Built-in Preamp
(Phono Input). Ensure you do not use an external Preamp if using a Built-in Preamp.
**Connecting a ground wire from the Preamp to the Powered Speakers may not be needed. If experiencing humming or
other audio issues it is recommended to connect a ground wire to a screw on the back of the active Powered Speaker.
For additional information, resources, or support, visit www.fluance.com/support
-
1
Fluance RT80 Classic High Fidelity Vinyl Turntable User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI