2. LECTRIC
  3. XP Suspension Seat Post

LECTRIC XP Suspension Seat Post User guide

  • Hello! I'm a chat assistant that has reviewed the Suspension Seatpost user manual. This document details how to correctly install your new suspension seatpost, including how to remove the old saddle, insert the new post, adjust the position, and ensure proper tightening. I'm ready to answer your questions about the installation or features of the seatpost.
  • What size wrench is needed for installation?
    What is the maximum weight capacity for the seatpost?
    What should you do after inserting the new seat post?
SUSPENSION SEATPOST QUICK START
How to correctly install your suspension seatpost
STEP 1
Use a 14mm wrench to loosen
the nuts on the bottom of the
saddle rails and separate the
saddle from the seat post.
STEP 3
Make sure to evenly tighten both
sides until wrench leaves an
impression on your palm.
STEP 2
MAX Weight Capacity: 220lbs
Insert your new suspension
post into the frame and
re-engage the seatpost collar.
At this time you can slightly
adjust the tilt of your seat and
the front to back position.
/