Sharp AQUOS D10 User manual

Hard Reset SHARP Aquos D10

How to factory reset SHARP Aquos D10? How to wipe all data in SHARP Aquos D10? How to bypass screen lock in SHARP

Aquos D10? How to restore defaults in SHARP Aquos D10?

The following tutorial shows all method of master reset SHARP Aquos D10. Check out how to accomplish hard reset by hardware keys

and Android 8.0 Oreo settings. As a result your SHARP Aquos D10 will be as new and your Qualcomm Snapdragon 630 core will run

faster.

1. In the first step, hold down the Power Button for a short while in order to switch off the

smartphone.

2. After that, push Volume Up and Power Key simultaneously for a couple of seconds.

3. When the Sharp logo appears, release both held buttons.

4. Now, by using Volume Buttons highlight the Wipe Data/Factory Reset option and then

press Power Key to confirm that.

5. Afterward, choose to YES--delete all user data and click Power Key to begin the whole

Hard Reset operation.

6. Finally, you can select Reboot System Now and press Power Button to accept it.

7. Good job, you performed the Hard Reset operation.