Lockly PGD 628 SN Operating instructions

  • Hello! I've reviewed the instructions for the F1 and F2 locks. This document provides guidance on installation using double-sided tape and optional drilling. I'm ready to answer any questions you might have about the dimensions, installation process, or any other details mentioned in the document.
  • Is drilling a hole mandatory for installation?
    What is the suitable door thickness for this lock?
    What are the dimensions?
1-3/4 "(45mm)
1-3/8 "(35mm)
2"(50mm)
1-3/4 " (45mm)
4-7/50"(105mm)
1-3/4 "(45mm)
1-3/8 "(35mm)
2"(50mm)
1-3/4 " (45mm)
4-7/50"(105mm)
Drilling a hole is not required. Stabilizing the lock with 3M
Double Sided tape is sufficient, as it is secured on the
bottom. However, if you wish to drill a hole for added
stability, you may use this guide for assistance.
Drilling a hole is not required. Stabilizing the lock with 3M
Double Sided tape is sufficient, as it is secured on the
bottom. However, if you wish to drill a hole for added
stability, you may use this guide for assistance.
86.0mm(3.39in)
170.0mm(6.69in)
164.4mm(6.47in)
178.0mm(7.01in)
77.1mm(3.04in)
199.0mm(7.83in)
70.0mm(2.76in)
41.0mm(1.7in)
13mm(0.51in)
41.0mm(1.7in)
60.0mm(2.36in)
41.0mm(1.7in)
25mm(0.98in)
57mm(2.24in)
13mm(0.51in)
F1 F2
86.0mm(3.39in)
170.0mm(6.69in)
164.4mm(6.47in)
178.0mm(7.01in)
77.1mm(3.04in)
199.0mm(7.83in)
70.0mm(2.76in)
41.0mm(1.7in)
13mm(0.51in)
41.0mm(1.7in)
60.0mm(2.36in)
41.0mm(1.7in)
25mm(0.98in)
57mm(2.24in)
13mm(0.51in)
F1 F2
F1 F2
ITPGD62820191217
/