2. Handy Living
  3. A163682

Handy Living A163682, A163699, A179713, A179720, A179737, A179744, B340C-LNN55-100, B340C-LNN83-100, B340C-PSU19-100, B340C-PSU30-100 Operating instructions

  • Hello! I've reviewed the provided instructions for assembling the chair. This document details how to put together the chair, including attaching the legs and back, and ensuring a secure fit. It also provides important maintenance tips for preserving the chair's condition over time and gives safety measures to reduce possibility of injury. I'm ready to answer any questions you might have about your chair assembly.
  • What should I avoid doing when opening the packaging?
    What should I do to prevent scratching the finish during assembly?
    What to do to make the chair stable?
Assembly
Chair Assembly Instructions
Parts List
1 x Back
4 x Washers
1 x Seat
2 x Front Legs
2 x Back Legs
E
A
B
C
D
Your chair comes packaged in one box.
DO NOT use any sharp objects to open plastic wrapped components
as damage to product or components may result.
Carefully remove all of the components from the packaging and
set aside for assembly. Assemble on a soft surface to prevent
scratching the finish.
CAUTION: Tighten all components securely
before use. Failure to do so may result in
personal injury.
Customer Support: 866-238-0531
Mon-Fri 8:00am - 4:30pm CST
[email protected]
Step 3
Step 2
B
B
A
A
DDD
φ47mm
Replaceable Parts
*
*
*
*
E
A
C
C
D
D
E
E
E
E
Adjust each leg by inserting
a washer (E) to make it
even and level with the floor.
OPTIONAL
or
C
B
C
B
D
E
Your style may differ from images. Care for your furniture by periodically
tightening all legs.
About your furniture piece:
• Softening of foam is natural and will happen over time with use.
• Fabric will fade or discolor in direct sunlight. Minimize exposure to
direct sunlight to extend the life of your furniture.
• Wood grain, knots, streaks, and color variation occur naturally in wood
and are not considered defects.
Estimated Assembly
Time in Minutes
<15 <45 60+
Line up brackets. Push
down hard on the back.
Make sure bracket locks
into place on both sides.
There should be no gaps
between the back and
the seat.
Step 1
/