Page is loading ...
IAN 285272
IonIc HaIr Dryer
SecaDora De pelo IónIca SHTD 2200D a1
IonIc HaIr Dryer
Operating instructions SecaDora De pelo IónIca
Instrucciones de uso
US - EN Operating instructions Page 1
US - ES Instrucciones de uso Página 19
Before reading, unfold the page containing the illustrations and familiarize yourself with all functions of the
device.
Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas
las funciones del dispositivo.
B
A
2
4
5
1
3
6
7
8
C
q
0
9
US-EN │ 1 ■
SHTD 2200D A1
Index
Introduction .......................................2
Warning used ......................................2
Important safety instructions .........................3
Additional safeguards ...............................5
Important Cord Information .....................................
7
Intended use .......................................8
Appliance description ...............................8
Unpacking ........................................9
Items supplied .....................................9
Operating Instructions ..............................10
Connect to power source .................................... 10
Heat and blower levels ...................................... 10
Cooling level ............................................. 11
Ionisation function .......................................... 11
Drying and styling hair .............................12
Technical data .....................................13
Cleaning .........................................14
Cleaning the housing ....................................... 14
Cleaning the air suction grill .................................. 14
Storage ..........................................15
Troubleshooting ...................................15
Disposal .........................................16
Disposal of the packaging ................................... 16
Warranty ........................................17
Distributor ........................................18
Read the operating instructions thoroughly, particularly the safety
instructions.
IB_285272_SHTD2200DA1_LB9.indb 1 20.04.17 14:31
■ 2 │ US-EN SHTD 2200D A1
Introduction
Congratulations on the purchase of your new appliance!
You have chosen a modern, high-quality product. These operating
instructions are part of the product. They contain important in-
formation about safety, usage and disposal. Before using the
product, please familiarize yourself with all operating and safety
instructions. This appliance may only be used as described and
for the purposes indicated. Please also pass these operating
instructions on to any future owner.
Warning used
The following types of warnings are used in these operating
instructions:
This is the safety alert symbol. It is used to alert you to
potential injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury and death.
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE indicates information considered important, but not
hazard-related (e. g. messages related to property damage).
IB_285272_SHTD2200DA1_LB9.indb 2 20.04.17 14:31
US-EN │ 3 ■
SHTD 2200D A1
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are
present, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER – As with most electrical appliances, electrical parts
are electrically live even when the switch is off:
To reduce the risk of death by electric shock:
1. Always “unplug it” immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled
into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, “unplug it” immediately. Do
not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or
injury to persons:
1. An appliance should never be left unattended when plugged
in.
2. Close supervision is necessary when this appliance is used
by, on, or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by the
manufacturer.
IB_285272_SHTD2200DA1_LB9.indb 3 20.04.17 14:31
■ 4 │ US-EN SHTD 2200D A1
4. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, damaged, or dropped into
water.
Return the appliance to a service center for examination and
repair.
5. Keep the cord away from heated surfaces. Do not wrap the
cord around the appliance.
6. Never block the air openings of the appliance or place it on
a soft surface, such as a bed or couch, where the air open-
ings may be blocked. Keep the air openings free of lint, hair,
and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) prod-
ucts are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11.
Do not direct hot air toward eyes or other heat sensitive
areas.
12. Attachments may be hot during use. Allow them to cool
before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair away from the air
inlets.
15. Do not operate with a voltage converter.
SAVE THESE INSTRUCTIONS
IB_285272_SHTD2200DA1_LB9.indb 4 20.04.17 14:31
US-EN │ 5 ■
SHTD 2200D A1
ADDITIONAL SAFEGUARDS
► Electrocution possible if used or dropped in tub.
► Unplug after using.
► Household use only.
Never use the appliance near water, and keep it away from
sinks, baths and other similar containers. The proximity of water
is hazardous, even if the appliance is switched off. Always
disconnect the plug from the electrical outlet after use.
► Connect the hairdryer only to a correctly installed electrical outlet
providing electrical current at the level detailed on the rating plate.
► Under no circumstances may the hairdryer be submerged in
liquids, or liquids be permitted to enter the appliance housing.
Do not expose the appliance to humidity or use it outdoors.
If any liquid gets into the housing, unplug the appliance
immediately and have it repaired by a qualified technician.
► Unplug the hairdryer from the power socket if defective operation
is apparent and before cleaning it.
► To disconnect the appliance, pull only on the plug itself, not on
the power cable.
► Do not wrap the power cable around the appliance and protect
the cable from being damaged.
IB_285272_SHTD2200DA1_LB9.indb 5 20.04.17 14:31
■ 6 │ US-EN SHTD 2200D A1
► Never touch the hairdryer, the power cable or the plug with
wet hands.
► Disconnect the hairdryer from the power source immediately
after use. The appliance is completely free of electrical power
only when you unplug it.
► You must not open or repair the housing of the hairdryer.
This is unsafe and invalidates the warranty.
► Children must not play with the appliance.
► NEVER put the hairdryer down or leave it unsupervised when it
is switched on.
► Never place the hairdryer close to sources of heat and protect
the power cable against potential damage.
► Do not cover the air intake grille while operating the appliance.
Clean it at regular intervals.
► The hairdryer becomes hot when it is in use. Hold it only by the
grip when it is hot.
This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm.
IB_285272_SHTD2200DA1_LB9.indb 6 20.04.17 14:31
US-EN │ 7 ■
SHTD 2200D A1
Important Cord Information
This appliance has a polarized plug. To reduce the risk of elec-
tric shock, this plug is intended to fit into a polarized outlet only
one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
► A short power-supply cord (or detachable power-supply cord)
should be used to reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
► Longer detachable power-supply cords or extensions cords are
available and may be used if care is exercised in their use.
► If a longer detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord set or extension cord
should be at least as great as the electrical rating of the appliance;
2) The cord should be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by children or
tripped over unintentionally; and
3) If the appliance is of the grounded type, the cord set or extension
cord should be a grounding-type-3-wire cord.
IB_285272_SHTD2200DA1_LB9.indb 7 20.04.17 14:31
■ 8 │ US-EN SHTD 2200D A1
Intended use
This hair dryer is intended only for the drying and shaping of
human hair, under no circumstances is it to be used for wigs and
hairpieces made of synthetic material. This hair dryer is intended for
domestic use only. Pay heed to all of the information in this operat-
ing manual, especially the safety instructions. This appliance is not
designed for use in commercial or industrial applications.
This appliance is not intended for any other use or for uses
beyond those mentioned herein. Claims of any kind for damage
resulting from unintended use will not be accepted. The operator
alone bears liability.
Appliance description
Figure A:
1 Styling jet
2 Air intake grill
3 Suspension loop
4 Ionic switch-in
5 Blower level switch (2 levels)
6 Heater level switch (3 levels)
7 Cooling level button d
Figure B:
8 Finger Diffusor
Figure C:
9 “Reset” button
0 “Test” button
q Safety connector
IB_285272_SHTD2200DA1_LB9.indb 8 20.04.17 14:31
US-EN │ 9 ■
SHTD 2200D A1
Unpacking
1) Remove all parts of the appliance and the operating instruc-
tions from the carton.
2) Remove all packaging material.
3) Clean all parts of the appliance as described in the section
“Cleaning”.
Check the package for completeness and signs of visible
damage.
If any items are missing or damaged as a result of defective
packaging or transportation, contact the service department
hotline (see chapter “Warranty”).
Items supplied
The appliance is delivered with the following components as
standard:
▯ Ionic Hairdryer
▯ Styling jet
▯ Finger Diffusor
▯ Operating instructions
IB_285272_SHTD2200DA1_LB9.indb 9 20.04.17 14:31
■ 10 │ US-EN SHTD 2200D A1
Operating Instructions
Connect to power source
This appliance is fitted with a safety connector q, which con-
tains a Ground Fault Circuit Interrupter (GFCI). If the appliance
malfunctions (by coming into contact with water, for example),
the GFCI changes to “off” and the hairdryer will no longer have
power.
If the Ground Fault Circuit Interrupter in the
safety connector q is no longer functioning, discontinue use.
Unplug the safety connector q and contact the Customer Service
department.
We recommend testing the safety connector q before each use
to make sure it is functioning perfectly:
1) Plug the safety connector q into an electrical outlet. Ensure
that the power being supplied from the electrical outlet
matches the voltage specified on the label.
2) Now press the “Test” button 0. The “Reset” button 9 will
spring out a little more from the q safety connector.
Now the hairdryer cannot be turned on again. The Ground
Fault Circuit Interrupter is working.
3) Press the “Reset” button 9 so that it snaps into place.
You can now use the hairdryer.
Heat and blower levels
1) Insert the plug into a power socket.
2) Switch the hair dryer on with the blower level switch 5.
The hair dryer is fitted with two function switches. With these you
can separately select the strength of the air flow (blower level
switch 5) and the level of heat (heat level switch 6):
IB_285272_SHTD2200DA1_LB9.indb 10 20.04.17 14:31
US-EN │ 11 ■
SHTD 2200D A1
Blower levels
OFF The hair dryer is switched off
reduced air flow
full power air flow
Heat levels
low heating level
medium heat level
high heating level
3) After use, switch the appliance off in that you place the blower
level switch 5 into position “OFF”. Then remove the plug from
the wall socket.
Cooling level
With the cooling level button 7 d you can produce a cooler air
flow with any combination of blower and heat levels (except level
“OFF”). If you wish to create a cold air stream, press and hold the
cooling level button 7 d. When you no longer need the cold air
stream, release the cooling level button 7 d.
Ionisation function
With the Ionic switch-in 4 you can additionally add the ionic func-
tion to every combination of blower and heat level.
■ Set the ionic switch-in 4 to the “ “ position: The ionisa-
tion function is turned on.
■ Set the ionic switch-in 4 to the “ “ position: The ionisa-
tion function is turned off.
IB_285272_SHTD2200DA1_LB9.indb 11 20.04.17 14:31
■ 12 │ US-EN SHTD 2200D A1
When drying the hair using a hair dryer, the hair takes on a static
charge and begins to “fly”.
The ionisation function ensures that this charging of the hair is
neutralised and cancelled. The hair becomes soft, supple, shiny
and easier to style. Please note, however, that the ionisation func-
tion will only work optimally if the attachments (finger diffuser 8/
styling jet 1) are removed as the attachment will interfere with
the application of the ions to the hair. Therefore, use the hairdryer
without attachments for maximum ionisation effect.
Drying and styling hair
■ To quickly dry hair, we recommend first of all using a high
blower and heater setting for a short period. Also, place the
Ionic switch-in 4 at the position
“”. After drying the hair, switch to a lower blower and
heat level to shape the hairstyle.
■ With the supplied styling jet 1 you can apply a directed air-
flow to shape and style your hair. Start by removing the finger
diffuser 8 first with a downwards snapping motion. Fit the styl-
ing jet 1 by pushing it with light pressure onto the hair dryer
so that it snaps into place and sits evenly on the hair dryer.
If you no longer require the styling jet 1, wait until the ap-
pliance has cooled down and pull it off with a downwards
snapping motion:
IB_285272_SHTD2200DA1_LB9.indb 12 20.04.17 14:31
US-EN │ 13 ■
SHTD 2200D A1
■ If you wish to dry your hair especially gently, or create a so-
called “air-dried wave”, then use the finger diffusor 8. Start by
removing the styling jet 1 with a downwards snapping motion.
Fit the finger diffusor 8 by pushing it with light pressure onto
the hair dryer so that it snaps into place and sits evenly on
the hair dryer.If you no longer require the finger diffusor 8,
wait until the appliance has cooled down and pull it off with a
downwards snapping motion:
■ Before you comb your hair out, allow it to cool so that the shap-
ing and styling can retain its form.
■ You can use the cooling level button 7 d to cool down your
hair down.
Technical data
Mains voltage 125 V ~, 60 Hz
Nominal power 1875 W
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interfer-
ence that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
IB_285272_SHTD2200DA1_LB9.indb 13 20.04.17 14:31
■ 14 │ US-EN SHTD 2200D A1
Cleaning
Always remove the safety connector q from
the electrical outlet before cleaning the appliance.
UNDER NO CIRCUMSTANCES should you
immerse the appliance in water or other liquids during cleaning!
After being cleaned, the hairdryer must be
completely dry before using it again.
Allow the appliance to cool sufficiently before
cleaning it.
Do not use any aggressive cleaning liquids or
solvents. They could damage the surface.
Cleaning the housing
■ Use a soft cloth lightly moistened with a mild soap solution to
clean the housing and attachments.
Cleaning the air suction grill
Risk of fire! Clean the air intake grille 2 at
regular intervals with a soft brush.
1) Turn the air intake grill 2 a little way anticlockwise so that it
can be removed from the hair dryer.
2) Clean the openings of the air intake grill 2 with a soft brush.
3) Push the air intake grille 2 back onto the hairdryer so that the
tabs on the air intake grille 2 click back onto the recesses on
the hairdryer. Turn the air intake grille 2 clockwise a little way
so that it clicks into place and sits tightly.
IB_285272_SHTD2200DA1_LB9.indb 14 20.04.17 14:31
US-EN │ 15 ■
SHTD 2200D A1
Storage
Do not package or transport the hairdryer
until it has cooled down. Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section "Cleaning".
■ For storage purposes, you can hang the hairdryer up by the
suspensionloop 3.
■ Store the hair dryer at a dustfree and dry location.
Troubleshooting
Should your hair dryer not function as expected, first remove the
plug from the mains power socket and allow the appliance to cool
down for a few minutes. The appliance is fitted with an overheat-
ing protector!
Should the appliance still not function, consult the service depart-
ment detailed under "Service".
IB_285272_SHTD2200DA1_LB9.indb 15 20.04.17 14:31
■ 16 │ US-EN SHTD 2200D A1
Disposal
Electrical devices may not be thrown away as part of normal
household trash. If you can no longer use your electrical device,
dispose of it in accordance with the legal provisions applicable in
your state. This will allow you to ensure that old electrical devices
are recycled and environmental pollution is kept to a minimum.
Further information about disposal is available on the Internet at
www.epa.gov.
Disposal of the packaging
The packaging protects the appliance from damage during
transport. The packaging materials have been selected for their
environmental friendliness and ease of disposal, and are therefore
recyclable.
Returning the packaging to the material cycle conserves raw mate-
rials and reduces the amount of waste that is generated. Dispose
of packaging materials that are no longer needed in accordance
with applicable local regulations.
If possible, keep the original packaging during the warranty pe-
riod so that the appliance can be properly packed for returning
in the event of a warranty claim.
IB_285272_SHTD2200DA1_LB9.indb 16 20.04.17 14:31
US-EN │ 17 ■
SHTD 2200D A1
Warranty
What does this warranty cover?
The warranty covers:
■ Damage, breakage, or inoperability due to defect.
■ Damage not accounted by normal wear and tear or following
the safety and maintenance instructions provided in the user
manual.
What is not covered by the warranty?
The warranty does not cover damage caused by:
■ Normal wear and tear of the product, including fragile parts
(such as switches, glass, etc.);
■ Improper use or transport;
■ Disregarding safety and maintenance instructions;
■ Accidents or acts of nature (eg., lightening, fire, water, etc.).
■ Tampering with the product (such as removing cover, unscrew-
ing screws etc.)
What is the period of coverage and warranty resolution?
The warranty is for 3 years from the date of purchase. At our dis-
cretion, product will either be refunded or replaced.
What will we not do?
We will not:
■ Start a new warranty period upon product exchange;
■ We will not repair product.
IB_285272_SHTD2200DA1_LB9.indb 17 20.04.17 14:31
/
