KuulAire KA15 Owner's manual

Brand: KuulAire

Model: KA15

Type: Owner's manual

This manual is also suitable for

KA12

CSD KuulAire Service Manual – KA12 & KA15

Port-A-Cool, LLC DOC. CSDKA12_KA15-1-0409.doc Rev. April 2009

1. How to replace cooling pad:

WARNING –

Before servicing, remove the unit from power source by unplugging

power supply cord from power outlet

Required Tool – Phillips head screw driver (Phillips head screw driver long (12”+)

with magnetized tip)

1.1. Rear Pad

a. Remove rear pad frame rear by removing two (2) screws.

b. Remove the pad assembly from the pad frame by removing four (4) screws.

CSD KuulAire Service Manual – KA12 & KA15

Port-A-Cool, LLC DOC. CSDKA12_KA15-1-0409.doc Rev. April 2009

c. Remove, pad retainer piece in the bottom from the pad assembly by gently

bending the snap-fit tabs.

d. Remove pad back cover by removing three (3) screws and slide out the pad

from the frame. Water dispersion media is located at the top of the pad

frame.

Pad retainer

Media main

Water dispersion

media

Slightly bend the

snap-fit tab each side

to get the pad

retainer loose

Media back

cover

Pad frame

CSD KuulAire Service Manual – KA12 & KA15

Port-A-Cool, LLC DOC. CSDKA12_KA15-1-0409.doc Rev. April 2009

1.2. Front pad

a. Remove rear pad assembly – see procedure 5.1.

b. Remove four (4) screws in the front bottom – may have to lay down the unit

on its back

c. Reach from the rear side (opened) and remove two screws on each side of

blower housing

d. Lift the front inlet panel from the bottom and remove it from the unit.

e. Follow procedure 5.1.b thru 5.1.d to remove media from the pad frame

Remove two (2), one on each side of blower

housing: use long Philips head screw driver

with magnetized tip

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

KuulAire KA15 Owner's manual

Brand: KuulAire

Model: KA15

Type: Owner's manual

This manual is also suitable for

KA12

Related papers

Other documents