EDEN GARDEN PRO Metal 4-Pattern Turbo Extension Watering Wand Operating instructions

Brand: EDEN GARDEN

Model: PRO Metal 4-Pattern Turbo Extension Watering Wand

Type: Operating instructions

TURBO

PRO METAL 4PATTERN THUMBCONTROL

TURBO EXTENSION WATERING WAND

94625EDAMZ

Eortless thumb control to

conveniently operate the

on/o function and volume

of water ow

Aluminum alloy construction for a

lightweight design with added durability

Dual-clamp – lock extension adjusts

between 40" (101.6 cm) to 66” (167.6 cm)

4-patterns for all your cleaning

& gardening needs

Honeycomb grip provides extra

control in wet conditions

Quick Connect Starter Set

ts all standard garden hoses

and watering tools

REACHING CHALLENGING WATERING TASKS

Make watering hard-to-reach places easier with the 4-pattern Turbo Extension Watering Wand. All done like a PRO. The 40- inch wand oers an

extended reach up to 66 inches to go further and clean hard-to-reach areas like under the car or above the windows. The 270 degree pivoting head

adjusts the spray angle to get water exactly where you need it.

The Turbo Wand cleans all surfaces using a precise compact stream of water that twists as it cleans. The circular twisting pulse motion quickly

washes dirt and debris away.

The PRO Metal 4-Pattern Turbo Extension Watering Wand helps you tackle your most challenging cleaning chores. With four adjustable spray

patterns, you can go from watering hanging baskets and delicate plants to cleaning cars or gutters. Easily adjust the water ow with the smooth

thumb control. No squeezing of the handle is required.

Tur bo: Great for large surface cleaning such as gutters, driveways, windows, decks, and pavement or for deep water penetration of hard soil.

Jet: Creates precise narrow strips and reaches a far distance. Useful for cleaning soits, porches, balconies, lawnmowers, snowblowers,

quadrunners, etc...

Flat: Creates a wide spray of at water. Useful to disperse and sweep leaves and dirt.

Cone: Gives you a circle of spray so that you can water a ring of plants all at once.

Eortless thumb control

270˚ Rotating pivoting head –

Water hard-to-reach areas

Midway foam for better

handling reduces hand fatigue

Extends from

40” (101.6cm) to 66” (167.6cm)

TURBO

FLAT JET

CONE

UNLOCK LOCK

Attach

the adapter

to the nozzle

Quickly attach

the connector

at the end of

your hose

Snap the two

together

Twist-and-lock mechanism

prevents accidental

disconnection

The Quick Connect Adapter (2 pcs) and Hose

Connector with Water Stop (1 pc) simplify your

watering experience. Simply attach the connector

at the end of your hose. Then, connect the

adapters to your watering tools. Interchange

various tools in a snap without turning o the

water as the adapter will stop the water ow. No

more kinking or hose twisting as the adapter

allows the hose to swivel 360 degrees.

A B C D

Quick and easy connections to 5/8-inch and

1/2-inch garden hoses, sprinklers, nozzles, and/or

any other garden watering tools

UNLOCK

LOCK

UNLOCK LOCK

Twist-and-lock

mechanism prevents

accidental disconnection

 CAUTION 

-For outdoor use with cold water only

-Do not spray near electrical connections

-When not in use, rinse the tool with water to remove most of the dirt, dry your tool, and store indoors

To unlock,

push down the

nozzle

270° pivoting head

allows watering in all

directions. Great for

reaching challenging

areas.

270˚

WARNING: This product can expose you to chemicals including styrene,

which is known to the State of California to cause cancer. For more

information go to www.P65Warnings.ca.gov.

Made in Taiwan www.edengarden.com

PRO METAL 4-PATTERN THUMB-CONTROL

TURBO EXTENSION WATERING WAND

Quick Assembly:

1- Completely loosen the main extension locking nut (counterclockwise).

2- Extend the added extension. You can now see the wand head

connection notch.

3- Align the wand head connection notch with the added extension

connection notch.

4- Insert the added extension into the wand head all the way

to the rubber o-ring.

5- Tighten the added extension locking nut by turning it clockwise

(Do not overtighten).

6- Repeat the above steps for the wand handle.

94625EDAMZ

Connection Notch

Rubber o-ring

Wand Head

Main extension locking nut

Added extension

Added extension locking nut

Main extension

Main extension locking nut

Wand Handle

EDEN GARDEN PRO Metal 4-Pattern Turbo Extension Watering Wand Operating instructions

EDEN GARDEN PRO Metal 4-Pattern Turbo Extension Watering Wand Operating instructions

EDEN GARDEN PRO Metal 4-Pattern Turbo Extension Watering Wand Operating instructions

Other documents