Home Styles 5182-42 Assembly Instructions

Brand: Home Styles

Model: 5182-42

Category: TV stands

Type: Assembly Instructions

Hardware List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Tools required for assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

[email protected]

Part List

Hex Wrench

1 pc.

Small

Hex Wrench

1 pc.

Cam Lock Screw

10 pcs.(+1 extra)

Cam Lock

10 pcs.

(+1 extra)

Wood Screw (short)

for Drawer Base Part

4 pcs. (+1 extra)

Machine

Screw

1 pc.

Pull Handle

1 pc.

Head Cap Bolt

for Bottom

4 pcs. (+1 extra)

88 5182 42

Art & Crafts Night Stand

White Finish

Drawer

1 pc.

)

(Knock-Down Construction, please refer

to the last page of these instructions for

drawer assembly steps

Frame Leg

2 pcs.

Top

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Front Rail

1 pc.

Front Rail

1 pc.

Bottom

1 pc.

Back Panel

1 pc.

Back Rail

2 pcs.

Stopper

1 pc.

Wood Screw

for Bottom

4 pcs. (+1 extra)

Wood Screw (long)

for Drawer Side Part

8 pcs. (+1 extra)

Wood Screw (short)

for Back Panel, Stopper

5 pcs. (+1 extra)

Flat Washer

4 pcs. (+1 extra)

Assembly Instructions 2/5

IMPORTANT

* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.

Figure 1

Cam Lock

Figure 2

STEP 2

Attach Back Rail (H) to Side Panel (B) with

Cam Locks. (See figure 2)

Slide Back Panel (G) to the unit.

Attach Front Rail (D) and (E) to unit with

Cam Lock.

Attach Side Panel (C) to unit with Cam

Locks.

Cam Lock Screw

STEP 1

Pull out shelf from Top (A).

Insert Cam Lock Screws into the pre-drilled holes of Top (A), Side Panel (B) and (C).

(See figure 1)

Assembly Instructions 3/5

STEP 4

Attach Top (A) to unit with Cam Locks.

Figure 3

STEP 3

Attach Bottom (F) to the unit with Flat Washers, Screws.

(See figure 3)

Attach Frame Leg (I) to the unit with Head Cap Bolts.

(See figure 4)

Figure 4

Flat Washer

Head Cap Bolt

Wood Screw

for Bottom

Cam Lock

Wood Screw

for Bottom

Flat Washer

Assembly Instructions 4/5

Figure 5

STEP 5

Slide shelf back into Top (A) of unit.

Insert Stopper and Wood Screw into the pre-drilled

holes of shelf. (See figure 5)

STEP 6

Insert 4X Wood Screws from the back of the unit,

tighten up all the Wood Screws. (See figure 6)

Slide Drawer (J) into place.

Figure 6

Stopper

Wood Screw

for Shelf

Wood Screw

for Back Panel

Figure 2

MAKE SURE ROLLER

IS ON THE BACK

Figure 3

Figure 4

Insert short wood screws (4X)

into the pre-drilled holes in J5,

tighten screws. (see Figure 3)

Slide J5 into the grooves in J3

and J4. Be sure to push J5 all

the way forward so it meets J1.

(see Figure 2)

STEP 2

STEP 3

STEP 4

Tighten all screws used in drawer assembly.

Assemble Pull Handle with

machine screws. (see Figure 4)

Assembly Instructions 5/5

Part List

J1.

Front Part

1 pc.

J5.

Base Part

1 pc.

J2.

Back Part

1 pc.

J3.

Side Part

1 pc.

J4.

Side Part

1 pc.

Drawer (J)

Attach J1 to J3 and J4, using

a Phillips screwdriver and

long wood screws (4X),

tighten halfway.

Attach J2 to J3 and J4 using

long wood screws (4X),

tighten halfway. (see Figure 1)

Figure 1

STEP 1

Home Styles 5182-42 Assembly Instructions

Brand: Home Styles

Model: 5182-42

Category: TV stands

Type: Assembly Instructions

Download PDF

report

Home Styles 5182-42 Assembly Instructions

Home Styles 5182-42 Assembly Instructions

Related papers

Other documents