Insignia NS-TADPT1USB | NS-TADPT1USB-C Owner's manual

Brand: Insignia

Model: NS-TADPT1USB | NS-TADPT1USB-C

Type: Owner's manual

This manual is also suitable for

Check out these important

safety instructions to keep

yourself and your devices safe.

• READ ALL INSTRUCTIONS BEFORE USING.

• DO NOT use this adapter with products containing screw-base sockets

or convenience receptacles.

• THIS PRODUCT IS NOT A VOLTAGE CONVERTER. Use this adapter only if

the power outlet voltage is within the range of your device’s voltage.

Using this adapter with an incompatible device and power outlet

may result in a risk of re, electric shock, injury to persons, or damage

to the device.

• Always attach the adapter to the device plug rst, then insert the

adapter into the power outlet.

• Always disconnect the adapter and the device from the power outlet

when not in use.

• To replace the fuse, use a new fuse with an identical size and rating to

the default fuse spec.

• No grounding. This product is for use with an unearthed or

double-insulated device only.

• This product should not be used with hair dryers or other high

wattage devices. Check your device label to make sure it does not

require more than 6A.

Warning: This product is intended for adult use. This product is NOT intended for use

by unsupervised children. Choose the proper settings and plug in this product before

directly supervising children using devices connected to this product. Intended for use

outside of USA and Canada.

Quick Setup Guide | NS-TADPT1USB / NS-TADPT1USB-C

Travel Adapter with Built-in USB Port

Before using your new product, please read

these instructions to prevent any damage.

PACKAGE CONTENTS

• Travel adapter with built-in USB port

• Quick Setup Guide

MAKING SURE YOUR DEVICE IS

COMPATIBLE

1 Determine the voltage of the power outlet you want to use.

See the table on the next page for common voltages.

2 Check the voltage of the device you want to connect to the

power outlet. You can nd the voltage information on your

device, on its power adapter, or in its manual.

3 Compare the power outlet voltage to your device’s voltage.

Notes:

• The voltage of some devices will be a range (for example,

a 120-240V device and a 240V power outlet).

• If your device has a dual voltage switch, slide it to the correct voltage.

4 Compare the power outlet voltage to your device’s wattage.

• If your device’s wattage is less than or equal to the max device

wattage, you may use this adapter with your device.

• If your device’s wattage is greater than the max device wattage,

your adapter is NOT compatible. You must purchase a converter to

power your device.

CAREFUL!

The power outlet voltage is:

• The same as your device’s voltage

• In the range of your device’s voltage

• 100V and your device is 120V

• Greater than your device’s voltage

• Less than your device’s voltage*

Instructions:

See step 4 to check

wattage compatibility.

NOT compatible. You

must purchase a

converter to power your

device.

USING YOUR ADAPTER

1 Make sure your device is compatible before use. Incorrect use

could damage your device.

2 Find the power outlet you want to connect your device to in

the table on the next page, then choose the adapter that will

t that outlet.

3 Make sure all plugs are COMPLETELY retracted, then push in

and slide forward the button that corresponds with your plug.

Caution: Do not open multiple plugs at the same time.

4 Connect the adapter to your device, then to a power outlet.

The power indicator lights. Use or charge your device as usual.

Connect a USB charging cable from the adapter to your

device, then connect the adapter to a power outlet. The

power indicator lights. Use or charge your device as usual.

Power outlet voltage:

100V

120V

240V

Max device wattage:

600W

720W

approx. 1380W

*Note: If the power outlet is 100V and your device is 120V, you may

use the adapter.

NS-TADPT1USB_14-0477_QSG_V2_EN.ai 1 5/12/2014 4:36:03 PMNS-TADPT1USB_14-0477_QSG_V2_EN.ai 1 5/12/2014 4:36:03 PM

V2 ENGLISH 14-0477

LEGAL NOTICES

FCC Statement

Caution: Changes or modications not expressly approved

by the part responsible for compliance could void the user's

authority to operate the equipment.

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Outlet types

Flat parallel

blades

Round pins

Flat angled

blades

3-prong

blades

USB charging

port

Plug types Location

Japan

Parts of North America and

Caribbean

Parts of South America,

Caribbean, and China

Parts of Middle East, Africa,

Asia, South America

Europe, parts of Middle East,

Africa, Asia, South America

Northern Europe

Australia, New Zealand, and

Fiji

Great Britain, Ireland, parts of

Africa, Hong Kong, and

Singapore

All USB charging devices

Voltage

100V

120V

240V

120V

240V

5V DC / 1.0A

REPLACING THE FUSE

Note: Replace only with a UL certied 6.3A/250V AC fuse.

1 Unscrew the fuse cover.

2 Remove the broken fuse.

3 Install the new fuse, then replace fuse cover.

SPECIFICATIONS

• AC Power Rating: 6A max. 100-240V AC (660W max. at

110V, 1380W max. at 230V)

• USB Power Rating: 1000mA +5V DC

• Built-In 6.3A replaceable fuse

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

Canadian Notice

CAN ICES-3 B/NMB-3 B

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 (U.S. and Canada)

or 01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated companies.

Registered in some countries.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

Made in China

NS-TADPT1USB_14-0477_QSG_V2_EN.ai 2 5/12/2014 4:36:03 PMNS-TADPT1USB_14-0477_QSG_V2_EN.ai 2 5/12/2014 4:36:03 PM

Insignia NS-TADPT1USB | NS-TADPT1USB-C Owner's manual

Brand: Insignia

Model: NS-TADPT1USB | NS-TADPT1USB-C

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Insignia NS-TADPT1USB | NS-TADPT1USB-C Owner's manual

This manual is also suitable for

Insignia NS-TADPT1USB | NS-TADPT1USB-C Owner's manual

Related papers

Other documents