Samsung LE32A436T1D User manual

Country

Customer Care Centre

Web Site

AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at

BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be

CZECH REPUBLIC

844 000 844 www.samsung.com/cz

Distributor pro Českou republiku:

Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4

DENMARK 70 70 19 70 www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

FINLAND 030-6227 515 www.samsung.com/

FRANCE

3260 SAMSUNG (€ 0,15/Min)

08 25 08 65 65 (€ 0,15/Min)

www.samsung.com

GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com

HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com

ITALIA 800-SAMSUNG (726-7864) www.samsung.com

LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be

NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND

0 801 801 881

022-607-93-33

www.samsung.com/pl

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt

SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk

SPAIN 902 10 11 30 www.samsung.com

SWEDEN 0771-400 200 www.samsung.com/se

SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch

U.K 0845 SAMSUNG (7267864) www.samsung.com

TURKEY 444 77 11 www.samsung.com

ESTONIA 800-7267 www.samsung.ee

LATVIA 800-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz

KYRGYZSTAN 00-800-500-55-500 -

RUSSIA 8-800-555-55-55 www.samsung.ru

TADJIKISTAN 8-10-800-500-55-500 -

UKRAINE 8-800-502-0000 www.samsung.com

UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/global/register

Model Serial No.

BN68-01464C-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care centre.

BN68-01464C-Cover.indd 1 2008-03-17 �� 3:45:27

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen

image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when

displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of

borders displayed on the left, right and center of the screen caused by the difference

of light emission on the screen. Playing a DVD or a game console may cause a similar

effect to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may

produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care centre.(See back cover for more information)

BN68-01464A-Eng-0229.indd 1 2008-03-17 �� 2:11:02

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts ........................................................ 2

Installing the Stand ............................................. 2

Installing the Wall Mount Kit ............................... 2

Viewing the Control Panel .................................. 3

Viewing the Connection Panel ........................... 4

Viewing the Remote Control ............................... 7

Installing Batteries in the Remote Control .......... 8

Switching On and Off ......................................... 8

Placing Your Television in Standby Mode........... 8

Viewing the Menus ............................................. 9

Using the TOOLS Button .................................... 9

Plug & Play ....................................................... 10

SETTING THE CHANNELS

Storing Channels Automatically ........................11

Storing Channels Manually .............................. 12

Adding / Locking Channels .............................. 13

Sorting the Stored Channels ............................ 14

Assigning Channels Names ............................. 14

Fine Tuning Channel Reception ....................... 15

LNA (Low Noise Amplier) ............................... 15

SETTING THE PICTURE

Changing the Picture Standard ........................ 16

Adjusting the Custom Picture ........................... 17

Conguring Detailed Settings on the Picture ... 17

Resetting the Picture Settings to the

Factory Defaults ...............................................

18

Changing the Picture Options .......................... 19

SETTING THE SOUND

Sound Features ................................................ 21

Selecting the Sound Mode ............................... 22

Connecting Headphones (Sold separately) ..... 22

SETTING THE TIME

Setting and Displaying the Current Time .......... 23

Setting the Sleep Timer .................................... 23

Switching the Television On and Off

Automatically ....................................................

24

FUNCTION DESCRIPTION

Choosing Your Language ................................. 24

Melody / Entertainment / Energy Saving ......... 25

Selecting the Source ........................................ 26

Editing the Input Source Names ...................... 27



USING THE DTV FEATURE

Previewing the DTV Menu System .................. 28

Updating the Channel List Automatically .......... 29

Updating the Channel List Manually ................ 29

Editing Your Favourite Channels ...................... 30

Selecting Channel List ..................................... 32

Displaying Programme Information .................. 32

Viewing the EPG (Electronic Programme

Guide) Information ...........................................

33

Using the Scheduled List ................................. 34

Setting the Default Guide ................................. 34

Viewing All Channels and Favourite Channels

.... 35

Adjusting the Menu Transparency .................... 35

Setting up the Parental Lock ............................ 36

Setting the Subtitle ........................................... 37

Setting the Subtitle Mode ................................. 37

Selecting the Audio Format .............................. 37

Selecting the Audio Description ....................... 38

Selecting the Digital Text (UK only) .................. 38

Selecting the Time Zone (Spain only) .............. 39

Viewing Product Information ............................ 39

Checking the Signal Information ...................... 40

Upgrading the Software ................................... 40

Viewing Common Interface .............................. 41

Selecting the CI (Common Interface) Menu ..... 41

Resetting .......................................................... 42

Selecting the Preferred Language

(Subtitle, Audio or Teletext) ..............................

42

Preference ........................................................... 43

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ..................................

44

Display Modes .................................................. 44

Setting up the TV with your PC ........................ 45

ABOUT ANYNET

+

What is Anynet

+

? ............................................ 46

Connecting Anynet

+

Devices ........................... 46

Setting Up Anynet

+ ..........................................

47

Scanning and Switching between Anynet

+

Devices ............................................................

48

Recording ......................................................... 50

Listening through a Receiver ........................... 50

Check Points before Requesting Service ......... 51

RECOMMENDATIONS FOR USE

Teletext Feature ............................................... 52

Wall-Mount Adjustment (Sold separately)

(depending on the model) ................................ 54

Using the Anti-Theft Kensington Lock

(depending on the model) ................................

55

Troubleshooting: Before Contacting

Service Personnel ............................................

56

Technical and Environmental Specications ... 57



English - 1

English

Symbol Press Note One-Touch

Button

BN68-01464A-Eng-0229.indd 1 2008-03-17 �� 2:11:02

English - 2

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Wall mount items (sold separately) allow you to mount the TV on

the wall.

For detailed information on installing the wall mount, see the

instructions provided with the Wall Mount items. Contact a

technician for assistance when installing the wall mounted bracket.

Samsung Electronics is not responsible for any damage to the

product or injury to yourself or others if you elect to install the TV on

your own.

Do not install your Wall Mount Kit while your TV is turned

on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a

cap and fasten with two screws.

➣

1. Connect your LCD TV and the stand.

Two or more people should carry the TV.

Make sure to distinguish between the front and back of the stand when assembling them.

2.

Fasten two screws at position 1 and then fasten two screw at position 2.

Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed

down, it may lean to one side.

The stand is installed for models with the screen size of 37 inch and above.

➣

1

2

Installing the Stand

Installing the Wall Mount Kit

M4XL16

Remote Control

& Batteries

(AAA x 2)

Power Cord Cover-Bottom

Stand Screw

X 4

Stand Cleaning Cloth



Owner’s Instructions



Warranty card



Safety Guide



Registration Cards

Warranty card / Safety Guide /

Registration Cards (Not available in all locations)

The stand and stand screw may not be included depending on the model.

➣

BN68-01464A-Eng-0229.indd 2 2008-03-17 �� 2:11:03

English - 3

Viewing the Control Panel

1 SOURCE

Toggles between all the available input

sources (TV, Ext.1, Ext. 2, AV, S-Video,

Component, PC, HDMI1, HDMI2, HDMI3,

DTV). In the on-screen menu, use this button

as you use the ENTER

button on the

remote control.

2 MENU

Press to see an on-screen menu of your TV’s

features.

3

Press to decrease or increase the volume.

In the on-screen menu, use the

buttons as you use the

◄

and

►

buttons on

the remote control.

4

Press to change channels. In the on-screen

menu, use the buttons as you use

the

▲

and

▼

buttons on the remote control.

(Without the Remote Control, you can turn on

the TV by using the Channel buttons.)

5 Speakers

6 (Power)

Press to turn the TV on and off.

Remote Control Sensor

Aim the remote control towards this spot on

the TV.

Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

The product colour and shape may vary depending on the model.

Side Panel buttons

1

2

3

4

55 6

BN68-01464A-Eng-0229.indd 3 2008-03-17 �� 2:11:04

English - 4

Viewing the Connection Panel

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

➣

The product colour and shape may vary depending on the model.

➣

2 3 54 61

!@

0

Power Input

3

8

9

7

[TV Side Panel]

[TV Rear Panel]

1 PC IN [PC] / [AUDIO]

Connect to the video and audio output jack on your PC.

2 COMPONENT IN

Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of

your set and the other ends to corresponding component video out connectors on the DTV or DVD.

If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to

the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.

The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y

and R-Y or Y, Cb and Cr.

Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to

corresponding audio out connectors on the DTV or DVD.

-

BN68-01464A-Eng-0229.indd 4 2008-03-17 �� 2:11:04

English - 5

3 HDMI IN 1, HDMI IN 2, HDMI IN 3

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD

players)

No additional Audio connection is needed for an HDMI to HDMI connection.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

What is HDMI?

“High Denition Multimedia interface” allows the transmission of high denition digital video data

and multiple channels of digital audio.

The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable

(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has

the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports

multi - channel digital audio.

DVI IN(HDMI2) [R-AUDIO-L]

DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component

480i 480p 576i 576p 720p 1080i

HDMI/DVI 50Hz

X X X O O O

HDMI/DVI 60Hz

X O X X O O

Component

O O O O O O

4 AUDIO OUT [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends

to corresponding audio in connectors on the Amplier or DVD Home Theatre.

5 ANT IN

To view television channels correctly, a signal must be received by the set from one of the following

sources:

An outdoor aerial / A cable television network / A satellite network

6 SERVICE

Connector for SERVICE only.

Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing

angle using your remote control.

7 COMMON

INTERFACE Slot

When CI Card isn’t inserted in some channels, "Scrambled

Signal" is displayed on the screen.

The pairing information containing a telephone number, CI

Card ID, Host ID and other information will be displayed in

about 2~3 minutes. If an error message is displayed, please

contact your service provider.

When the channel information conguration has nished, the

message "Updating Completed" is displayed, indicating that

the channel list is now updated.

You must obtain a CI Card from a local cable service provider.

Remove the CI Card by carefully pulling it out with your hands since dropping the CI Card may

cause damage to it.

Insert the CI-Card in the direction marked on it.

The place of the COMMON INTERFACE Slot may be different depending on its model.

-

➣

-

➣

-

➣

BN68-01464A-Eng-0229.indd 5 2008-03-17 �� 2:11:05

English - 6

8 S-VIDEO or VIDEO / R-AUDIO-L

Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or

Camcorder.

Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio

out connectors on the A/V device.

9 Headphones jack

Headphone may be connected to the headphone output on your set. While the head phone is

connected, the sound from the built-in speakers will be disabled.

0 Kensington Lock (depending on the model)

The Kensington lock (optional) is a device used to physically x the system when used in a public

place.

If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the kensington lock may be different depending on its model.

! DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV

outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on

the DVD player or Cable/Satellite Box directly to an Amplier or Home Theater, not the TV.

@ EXT 1, EXT 2

Connector

Input Output

Video Audio (L/R) RGB Video + Audio (L/R)

EXT 1

O O O

Only TV or DTV output is available.

EXT 2

O O

Output you can choose.

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

-

➣

BN68-01464A-Eng-0229.indd 6 2008-03-17 �� 2:11:05

English - 7

TOOLS

1 Television Standby button

2 Selects the TV and DTV

mode directly

3 Number buttons for direct

channel access

4

One/Two-digit channel

selection

5

+

: Volume increase

: Volume decrease

6 Temporary sound switch-off

7 Electronic Program Guide

(EPG) display

8 Use to quickly select

frequently used functions.

9 Use to see information on

the current broadcast

0 Colour buttons :

Use these buttons in the

Channel list, etc.

@ Press to select the optional

display and sound modes for

sports, cinema and games.

#

Use these buttons in the

DMA, and Anynet

+

.

( : This remote can be

used to control recording on

Samsung recorders with the

Anynet

+

feature)

$ Available source selection

% Previous channel

^ P : Next channel

P : Previous channel

& Displays the main on-screen

menu

* Displays the Channel List on

screen

( Returns to the previous

menu

) Control the cursor in the

menu

a Exit the on-screen menu

b Use this when connecting

a SAMSUNG DMA (Digital

Media Adapter) device

through an HDMI interface

and switching to DMA

mode.(The DMA button is

optional.)

For more information on the

operating procedures, refer to

the user manual of the DMA.

This button is available when

“Anynet

+

(HDMI-CEC)" is “On”

(see page 47)

c Picture size selection

d Digital subtitle display

e Selects the HDMI mode

directly.

Teletext Functions

2 Exit from the teletext display

7 Teletext store

8 Teletext size selection

9 Teletext reveal

0 Fastext topic selection

! Alternately select Teletext,

Double, or Mix.

$ Teletext mode selection

(LIST/FLOF)

% Teletext sub page

^ P : Teletext next page

P : Teletext previous page

& Teletext index

( Teletext hold

a Teletext cancel

The performance of the remote control may be affected by bright light.

➣

Viewing the Remote Control

BN68-01464A-Eng-0229.indd 7 2008-03-17 �� 2:11:05

English - 8

1. Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t

be using the remote control for a long time.

➣

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

➣

Installing Batteries in the Remote Control

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

2. Press the button on your set.

You also can press the POWER button or the TV/DTV button on the remote control to turn

the TV on.

The channel that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on your set.

When you switch the set on for the very rst time, you will be asked to choose language in which the

menus are to be displayed.

4. To switch your set off, press the POWER button again.

➣

Your set can be placed in standby mode in order to reduce the power consumption. The standby

mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or

channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday,

for example).

It is best to unplug the set from the mains and aerial.

➣

Placing Your Television in Standby Mode

BN68-01464A-Eng-0229.indd 8 2008-03-17 �� 2:11:06

English - 9

You can use the TOOLS button to select your frequently

used functions quickly and easily. The “Tools” menu change

depending on which external input mode you are viewing.

1. Press the TOOLS button.

The “Tools” menu will appear.

2.

Press the ▲ or ▼ button to select a menu.

3.

Press the ▲/▼/◄/►/ENTER

buttons to display, change, or

use the selected items. For a more detailed description of each

function, refer to the corresponding page.

• Anynet+ (HDMI-CEC), see page 47

• Picture Mode, see page 16

• Sound Mode, see page 21

• Sleep Timer, see page 23

• SRS TS XT, see page 21

• Energy Saving, see page 26

• Dual l-ll, see page 22

• Auto Adjustment, see page 45

1. With the power on, press the MENU button.

The main menu appears on the screen. The menu’ s left side

has icons: Picture, Sound, Channel, Setup, Input, Digital Menu.

2. Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER

button to access the icon’s sub-

menu.

3.

Press the EXIT button to exit.

The on-screen menus disappear from the screen after about

one minute.

Viewing the Menus

Using the TOOLS Button

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Detailed Settings



Picture Options 

Reset : OK



TV

Move Enter Return

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Move Enter Exit

Tools

BN68-01464A-Eng-0229.indd 9 2008-03-17 �� 2:11:07

English - 10

When the TV is initially powered on, several basic settings

proceed automatically and subsequently. The following

settings are available.

Any functions related to Digital TV (DVB) will only work in

countries or areas where DVB-T (MPEG2) digital terrestrial

signals are broadcasted. Please confirm with your local

dealer if you can receive DVB-T signals. Although this TV set

follows the DVB-T specification, maintaining compatibility with

the future coming DVB-T digital terrestrial broadcasts is not

guaranteed. Several functions may not be available in some countries.

1. Press the POWER button on the remote control.

The message "Start Plug & Play

." is displayed with "OK" selected.

2. Select the appropriate language by pressing the

▲

or

▼

button.

Press the

ENTER

button to confirm your choice.

3. Press the

◄

or

►

button to select “Store Demo” or “Home Use”, then the ENTER

button.

We recommend setting the TV to "Home Use" mode for the best picture in your home

environment.

"Store Demo" mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”

(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and

hold the MENU button on the TV for 5 seconds.

4. The message "Check antenna input." is displayed with "OK" selected.

Press the

ENTER

button.

Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the

▲

or

▼

button.

Press the

ENTER

button to confirm your choice.

6. The message “Some DTV functions may not be available. Digital Scan?” is displayed.

Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER

button.



Yes

:

First an Analogue TV search is performed and then a Digital TV ch. auto search is per-

formed.



No

:

Only an Analogue TV search is performed.

This function is supported for all countries except for the following countries: France, Germany,

Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.

7.

The "Auto Store" menu is displayed with the "Start" selected. Press the

ENTER

button.

The channel search will start and end automatically.

The DTV channel scan menu appears and the DTV channel is automatically updated.

If the DTV channel is updated, the Source in the source list of the Input menu is automatically

changed to DTV.

After all the available channels are stored, the "Clock Set" menu appears.

Press the ENTER

button at any time to interrupt the memorization process.

For detailed descriptions about DTV channel update, refer to page 29 of this manual.

After all the available digital channels are stored, the screen to select a time zone is displayed

depending on the country.

8. Press the ENTER

button.

Select the "Month", "Day", "Year", "Hour", or

"Min" by pressing the

◄

or

►

button.

Set the "Month", "Day", "Year", "Hour", or

"Min" by pressing the

▲

or

▼

button.

You can also set the “Month”, “Day”, “Year”, “Hour” and "Min" by pressing the number buttons on

the remote control.

Plug & Play

Start Plug & Play.

Enter

OK

BN68-01464A-Eng-0229.indd 10 2008-03-17 �� 2:11:07

English - 11

9. Press the ENTER

button to confirm your setting. The message “Enjoy your viewing” is displayed.

When you have finished, press the ENTER

button.

Even if the ENTER

button is not pressed, the message will automatically disappear after

several seconds.



Language

: Select your language.



Country

: Select your country.



Auto Store

: Automatically scans for and stores channels available in the local area.



Clock Set

: Sets the current time for the TV clock.

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Setup" then press the

ENTER button.

2. Press the

ENTER

button again, to select "Plug & Play".

For further details on setting up options, refer to the page 10.

The “Plug & Play” feature is only available in the TV mode.

➣

You can scan for the frequency ranges available to you (and

availability depends on your country).

Automatically allocated programme numbers may not correspond

to actual or desired programme numbers. However, you can sort

numbers manually and clear any channels you do not wish to

watch.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

2. Press the

ENTER

button to select "Country".

3. Select the appropriate country by pressing the

▲

or

▼

button.

Press the ENTER

button to confirm your choice.

Even though you have changed the country setting in this menu, the country setting for DTV is

not changed. (Refer to page 29)

4. Press the

▲

or

▼

button to select "Auto Store", then press the ENTER

button.

5. Press the

ENTER

button.

The TV will begin memorizing all of the available channels.

Press the ENTER

button at any time to interrupt the memorization process and return to the

"Channel" menu.

6. After all the available channels are stored, the "Sort" menu appears. (refer to page

14)

➣

Storing Channels Automatically

TV

Setup

Plug & Play 

Language : English 

Time 

Melody : Off



Entertainment : Off 

Energy Saving : Off



Move Enter Return

TV

Channel

Country : United Kingdom 

Auto Store



Manual Store 

Channel Manager 

Sort 

Name



Fine Tune 

LNA : Off



Move Enter Return

BN68-01464A-Eng-0229.indd 11 2008-03-17 �� 2:11:08

English - 12

Storing Channels Manually

Not available in DTV or external input mode.

You can store television channels, including those received

via cable networks.

When storing channels manually, you can choose:

♦ Whether or not to store each of the channels found.

♦ The programme number of each stored channel which you wish

to identify.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Manual Store", then press

the ENTER

button.

3. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER

button.

4. When you are satisfied with your setting, press the

ENTER

button.

5.

Press the EXIT button to exit.

♦ Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

♦ Colour System: Auto/PAL/SECAM/NTSC4.43

− Press the ▲ or ▼ button to select the required colour standard.

♦ Sound System: BG/DK/I/L

− Press the ▲ or ▼ button to select the required sound standard.

♦ Channel (When you know the number of the channel to be stored)

− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

− Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

If there is abnormal sound or no sound, re-select the sound standard required.

♦ Search (When you do not know the channel numbers)

− Press the ▲ or ▼ button to start the search.

− The tuner scans the frequency range until the first channel or the channel that you selected is

received on the screen.

♦ Store (When you store the channel and associated programme number)

− Set to "OK" by pressing the ENTER

button.

Channel mode

− P (Programme mode): When completing tuning, the broadcasting stations in your area have been

assigned to position numbers from P00 to P99. You can select a channel by entering the position

number in this mode.

− C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

− S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

Channel

Country : United Kingdom 

Auto Store 

Manual Store



Channel Manager 

Sort 

Name 

Fine Tune



LNA : Off 

Move Enter Return

TV

Manual Store

Programme : P 1

Colour System : Auto 

Sound System : BG 

Channel : S 6

Search : 140 MHz

Store : ?

Move Enter Return

TV

BN68-01464A-Eng-0229.indd 12 2008-03-17 �� 2:11:09

English - 13

Not available in DTV or external input mode.

Using the Channel Manager, you can conveniently lock or add

channels.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

2. Press the

▲

or

▼

button to select "Channel Manager",

then press the ENTER

button.

♦ Adding channels

Using the Channel List, you can add channels.

3. Select

"Channel List" by pressing the ENTER

button.

4. Move to the (

) field by pressing the ▲, ▼, ◄ or ►

button, select a channel to be added, and press the

ENTER

button to add the channel.

If you press the ENTER

button again, the ( ) symbol

next to the channel disappears and the channel is not

added.

" " is active when "Child Lock" is selected to "On".

♦ Locking channels

This feature allows you to prevent unauthorized users, such

as children, from watching unsuitable programmes by muting

out video and audio.

5. Press the

▲

or

▼

button to select "Child Lock", then press

the ENTER

button.

6. Select "On" by pressing the ▲ or ▼ button, then press the

ENTER

button.

7. Press the

▲

or

▼

button to select "Channel List",

then press the ENTER

button.

8. Move to the

" " field by pressing the ▲, ▼, ◄ or ► button,

select a channel to be locked, and press the ENTER

button.

If you press the ENTER

button again, the ( ) symbol

next to the channel disappears and the channel lock is

cancelled.

A blue screen is displayed when "Child Lock" is activated.

9. Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active

or inactive.

You can select these options by simply pressing the CH LIST

button on the remote control.

➣

Adding / Locking Channels

P 1 C3

Channel List

Move Enter

Page Return

Add Lock

1 / 10

Prog.

0 C--

1 C3

2 BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

9 S7

Channel

Country : United Kingdom 

Auto Store 

Manual Store



Channel Manager 

Sort 

Name 

Fine Tune



LNA : Off 

Move Enter Return

TV

Channel Manager

Channel List 

Child Lock : Off 

Move Enter Return

BN68-01464A-Eng-0229.indd 13 2008-03-17 �� 2:11:10

English - 14

This operation allows you to change the programme numbers

of the stored channels.

This operation may be necessary after using the auto store.

Not available in DTV or external input mode.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the

▲

or

▼

button to select "Sort", then press the

ENTER

button.

3. Select the channel number that you wish to change by

pressing the

▲

or

▼

button repeatedly.

Press the ENTER

button.

The selected channel number and name are moved to

right side.

4. Press the

▲

or

▼

button to move to the position in which you

would like to change and then press the ENTER

button.

5. Repeat steps

3 to 4 for another channel to be sorted.

6. Press the EXIT

button to exit.

➣

Sorting the Stored Channels

Assigning Channels Names

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

Not available in DTV or external input mode.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

2. Press the

▲

or

▼

button to select "Name", then press the

ENTER

button.

3. If necessary, select the channel to be assigned to a new

name by pressing the

▲

or

▼

button. Press the ENTER

button.

The selection bar is displayed around the name box.

4.

The following characters are available: Letters of the alphabet (A~Z) / Numbers

(0~9) / Special characters (+, -, *, /, space)

5. Repeat steps 3 to 4 for each channel to be assigned to a new name.

6. Press the EXIT

button to exit.

➣

To...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

Then...

Press the ▲ or ▼ button

Press the ► button

Press the ◄ button

Press the ENTER

button

Channel

Country : United Kingdom 

Auto Store 

Manual Store 

Channel Manager 

Sort



Name 

Fine Tune



LNA : Off 

TV

Move Enter Return

Sort

Prog. Ch. Name



0 C-- -----

1 C23 -----



2 S06 -----

3 S07 -----

4 S09 -----

5 S12 -----

6 S13 -----

7 S14 -----

8 S17 -----

9 C21 -----



TV

Move Enter Return

Channel

Country : United Kingdom 

Auto Store



Manual Store 

Channel Manager 

Sort 

Name



Fine Tune 

LNA : Off



Move Enter Return

TV

Name

Move Enter Return

Prog. Ch. Name



0 C-- -----

1 C23 -----

2 S06 -----

3 S07 -----

4 S09 -----

5 S12 -----

6 S13 -----

7 S14 -----

8 S17 -----

9 C21 -----



TV

BN68-01464A-Eng-0229.indd 14 2008-03-17 �� 2:11:11

English - 15

Use fine tuning to manually adjust a particular channel for

optimal reception.

Not available in DTV or external input mode.

1. Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the

MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

3. Press the

▲

or

▼

button to select "Fine Tune", then press

the ENTER

button.

4. Press the

◄

or

►

button to adjust the fine tuning.

Press the ENTER

button.

5. Press the EXIT

button to exit.

Fine tuned channels that have been saved are marked

with an asterisk "

*

" on the right-hand side of the channel

number in the channel banner. And the channel number

turns red.

To reset the ne-tuning, select "Reset" by pressing the

▲

or

▼

button and then press the ENTER

button.

➣

Fine Tuning Channel Reception

Channel

Country : United Kingdom 

Auto Store 

Manual Store



Channel Manager 

Sort



Name 

Fine Tune 

LNA : Off 

TV

Move Enter Return

Fine Tune

P 1

0

Reset

Adjust Save Return

If the TV is operating in a weak-signal area, the LNA function

can improve the reception (a low-noise preamplifier boosts

the incoming signal).

Not available in DTV or external input mode.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

2. Press the

▲

or

▼

button to select "LNA", then press the

ENTER

button.

3. Press the

▲

or

▼

button to select "Off" or "On".

Press the ENTER

button.

4. Press the EXIT

button to exit.

➣

LNA (Low Noise Amplier)

Channel

Country : United Kingdom 

Auto Store 

Manual Store 

Channel Manager



Sort 

Name 

Fine Tune



LNA : Off 

TV

Move Enter Return

Channel

Country : United Kingdom

Auto Store

Manual Store

Channel Manager

Sort

Name

Fine Tune

LNA : Off

TV

Move Enter Return

Off

On

BN68-01464A-Eng-0229.indd 15 2008-03-17 �� 2:11:12

English - 16

You can select the type of picture which best corresponds to

your viewing requirements.

1. Press the MENU button to display the menu.

Press the ENTER

button, to select "Picture".

2. Press the

ENTER

button again, to select "Mode".

3. Press the

▲

or

▼

button to select the desired picture effect.

Press the ENTER

button.

4. Press the EXIT

button to exit.

♦ Dynamic: Selects the picture for high-definition in a bright

room.

♦ Standard: Selects the picture for optimum display in a

normal environment.

♦ Movie: Selects the picture for comfortable display in a

dark room.

The Picture mode must be adjusted separately for each

input source.

Changing the Picture Standard

Picture

Mode : Standard 

Backlight

7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Detailed Settings 

Picture Options



Reset : OK 

TV

Move Enter Return

Picture

Mode : Standard

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Detailed Settings

Picture Options

Reset : OK

TV

Move Enter Return

Dynamic

Standard

Movie

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select "Picture Mode".

3. Press the ◄ or ► button to select the required option.

4. Press the EXIT

or TOOLS button to exit.

Anynet+ (HDMI-CEC)

Picture Mode ◄ Standard ►

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Tools

Move Adjust Exit

BN68-01464A-Eng-0229.indd 16 2008-03-17 �� 2:11:13

English - 17

Your set has several settings which allow you to control

picture quality.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 16)

2. Press the

▲

or

▼

button to select a particular item. Press the

ENTER

button.

3. Press the

◄

or

►

button to decrease or increase the value of

a particular item. Press the ENTER

button.

4. Press the EXIT

button to exit.

♦ Backlight: Adjusts the screen brightness by adjusting the

LCD backlight brightness. (0~10)

♦ Contrast: Adjusts the lightness and darkness between

objects and the background.

♦ Brightness: Adjusts the brightness of the whole screen.

♦ Sharpness: Adjusts the outline of objects to either

sharpen them or make them more dull.

♦ Colour: Adjusts the colours, making them lighter or

darker.

♦ Tint:

Adjusts the colour of objects, making them more red or

green for a more natural look.

The adjusted values are stored according to the selected Picture mode.

In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness".(32, 37 inch)

In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)

In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.

You can return to the factory defaults picture settings by selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18)

Adjusting the Custom Picture

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness

45

Sharpness 50

Colour 50

Tint G 50 R 50

Detailed Settings 

Picture Options



Reset : OK 

TV

Move Enter Return

7

▲

Backlight

▼

Move Adjust Return

You can set detailed picture settings.

1.

Press the MENU button to display the menu.

Press the ENTER

button, to select "Picture".

2. Press the ENTER

button to select “Mode”.

Press the ▲ or ▼ button to select “Standard” or “Movie”, then

press the ENTER

button.

3.

Press the ▲ or ▼ button to select "Detailed Settings", then

press the

ENTER

button.

4. Select the required option by pressing the ▲ or ▼ button,

then press the

ENTER

button.

5. When you are satisfied with your setting, press the

ENTER

button.

6. Press the EXIT button to exit.

"Detailed Settings" is available in "Standard" or "Movie"

mode.

In PC mode, you can only make changes to

“Dynamic Contrast”, “Gamma” and “White Balance” from

among the “Detailed Settings” items.

➣

Conguring Detailed Settings on the Picture

Detailed Settings

Black Adjust : Off 

Dynamic Contrast

: Medium 

Gamma : 0 

Colour Space

: Native 

White Balance



Flesh Tone : 0 

Edge Enhancement : On 

Move Enter Return

TV

Picture

Mode : Standard 

Backlight

7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Detailed Settings



Picture Options 

Reset : OK 

TV

Move Enter Return

BN68-01464A-Eng-0229.indd 17 2008-03-17 �� 2:11:14

English - 18

♦ Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

♦ Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

♦ Gamma: -3 ~ +3

You can adjust the Primary

Colour (Red, Green, Blue) Intensity.

Press the ◄ or ► button until you reach the optimal setting.

♦ Colour Space: Auto/Native/Custom

Colour space is a Colour matrix composed of red, green and blue colours.

Select your favourite Colour space to experience the most natural Colour.

♦ Auto: Auto Color Space automatically adjusts to the most natural color tone based on program

sources.

♦ Native: Native Color Space offers deep and rich color tone.

♦ Custom: Adjusts the color range to suit your preference.

Customizing the Colour Space

Colour: Red/Green/Blue/Yellow/Cyan/Magenta

Adjusts the Colour range to suit your preference.

“Colour” is available when “Colour Space” is set to “Custom”.

Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.

Press the ENTER

button.

Red/Green/Blue

: In "Colour", you can adjust the RGB values for the selected colour.

Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the ENTER

button.

Press the ◄ or ► button to decrease or increase the value of a particular item.

Press the ENTER button.

Reset: Resets the colour space to the default values.

♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the colour temperature for more natural picture colours.

R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the

adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the

ENTER

button.

Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

♦ Flesh Tone: -15 ~ +15

You can emphasize the pink 'flesh tone' in the picture.

Press the ◄ or ► button until you reach the optimal setting.

Changing the adjustment value will refresh the adjusted screen.

♦ Edge Enhancement: Off/On

You can emphasize object boundaries in the picture.

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3

on page 16.

2. Press the

▲

or

▼

button to select "Reset", then press the

ENTER

button.

3.

Press the

▲

or

▼

button to select "OK" or "Cancel".

Press the ENTER

button.

4. Press the EXIT

button to exit.

The "Reset" will be set for each Picture mode.

Picture

Mode : Standard

Backlight 7

Contrast 95

Brightness

45

Sharpness 50

Colour 50

Tint G 50 R 50

Detailed Settings

Picture Options

Reset : OK

TV

Move Enter Return

OK

Cancel

BN68-01464A-Eng-0229.indd 18 2008-03-17 �� 2:11:15

Page is loading ...

Samsung LE32A436T1D User manual

Related papers

Other documents