Bosch MUM51U10UC/01 User manual

Page is loading ...

3

Use and Care Manual. . . . . . . . . . . . . . . . . . . . . . . . 4

READ THIS MANUAL thoroughly for important safety

and operating instructions before using this appliance.

Notice d'utilisation et d'entretien . . . . . . . . . . . . . . . 35

Avant tout utilisation, LISEZ ATTENTIVEMENT ce manuel,

vous y trouverez des consignes importantes portant sur la

sécurité et le fonctionnement de votre appareil.

Page is loading ...

5

, IMPORTANT SAFEGUARDS

READ THIS MANUAL thoroughly for important safety

and operating instructions before using this appliance.

HOUSEHOLD USE ONLY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your

appliance. Always read and obey all safety messages.

These words mean:

All safety messages will tell you what the potential hazard is, tell you how to reduce

the chance of injury, and tell you what can happen if the instructions are not followed.

WARNING: A risk of fire and electrical shock exists in all electrical

appliances and may cause personal injury or death.

When using electrical appliances, basic safety precautions should

always be followed, including the following:

1. Read all instructions before using this appliance.

2. To protect against risk of electrical shock do not put the appliance in

water or other liquid.

3. Close supervision is necessary when any appliance is used by or near

children.

4. Do not allow children to use this appliance.

5. When children become old enough to operate the appliance, it is the

responsibility of the parents or legal guardians to ensure that they are

instructed in safe practices by qualified persons.

,

This is the safety alert symbol. This symbol alerts you to potential

hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either

the word WARNING or CAUTION.

,

WARNING

This indicates that death or serious injuries

may occur as a result of non-observance of

this warning.

,

CAUTION

This indicates that minor or moderate injuries

may occur as a result of non-observance of

this warning.

6

6. Unplug from the outlet when not in use, before putting on or taking off

parts, and before cleaning.

7. Avoid contacting moving parts. Keep hands, hair, clothing, as well as

spatulas and other utensils away from beater during operation to

reduce the risk of injury to persons and/or damage to the appliance.

Do not leave appliances unattended during operation.

8. Do not operate any appliance with a damaged cord or plug, or after

the appliance malfunctions, or is dropped or damaged in any manner.

Return appliance to the nearest Authorized Service Facility for

examination, repair, or electrical or mechanical adjustment.

9. Do not use attachments that are not recommended or sold by Bosch.

Using attachments not recommended by Bosch may cause fire,

electric shock or injury.

10. Do not use outdoors.

11. Do not let cord hang over edge of table or counter or come in contact

with hot surfaces.

12. Keep hands and utensils away from moving blades or discs while

processing food to reduce the risk of severe injury to persons or

damage to the appliance. A scraper may be used but must be used

only when the appliance is not running and main plug removed.

13. Blades are sharp. Handle carefully due to risk of injury.

14. To reduce the risk of injury, never place cutting blade or discs on base

without first putting bowl properly in place.

15. Be certain cover is securely locked in place before operating

appliance.

16. Never feed food by hand. Always use the food pusher.

17. Do not attempt to override the cover interlock mechanism.

18. Do not remove warning or caution labels.

19. This product is designed for household use only.

ALSO BE SURE TO READ THE WARNINGS AND CAUTIONS THAT

ARE PROVIDED BEFORE EACH ATTACHMENT'S OPERATING

INSTRUCTION.

SAVE THESE INSTRUCTIONS

7

ELECTRICAL

REQUIREMENTS

Volts: 120 V.A.C.

Hertz: 60 Hz

SPECIFIC SAFETY

INSTRUCTIONS

STATE OF CALIFORNIA PROPOSITION 65 WARNINGS

,

WARNING: This product contains one or more chemicals known to the

State of California to cause cancer, birth defects or other reproductive harm.

,

WARNING

Fire Hazard

Do not use an extension cord.

Doing so can result in death or serious

injury.

,

WARNING

This appliance is equipped with

a polarized plug (one blade is wider

than the other).

To reduce the risk of electrical shock,

this plug will fit in a polarized outlet only

one way.

If the plug does not fit fully in the

outlet, reverse the plug. If it still does

not fit, contact a qualified electrician.

Do not modify the plug in any way.

Do not use an extension cord.

If the power supply cord is too short,

have a qualified electrician or

serviceman install an outlet near the

appliance.

,

WARNING

To avoid risk of injury and electrical

shock, follow these precautions:

1. Do not insert main plug until all

preparations for working with the

appliance are complete.

2. Never immerse the base unit in

liquid or hold under running water.

3. Do not use a steam cleaner.

4. Do not adjust the swivel arm while

the appliance is switched on. Wait

until the drive has come to a

standstill.

5. Do not change tool/accessory until

the drive is at a standstill – when the

appliance is switched off, the drive

continues running briefly.

6. Use only the rotary switch to turn the

appliance on or off.

7. When the appliance is not in use,

unplug the power cord.

8. Turn off the appliance and unplug

the power cord before resolving

a problem.

,

WARNING

Blades are sharp!

To avoid risk of injury, do not grip the

sharp blades or cutting edges of the

cutting discs. Take hold of cutting discs

by the edge only.

8

Explanation of the symbols on

the appliance or accessory

Follow the instructions in

the operating instructions.

, WARNING!

Rotating blades.

, WARNING!

Rotating tools! Do not place

fingers in the feed tube.

Intended use

This appliance is suitable for mixing,

kneading and beating food. It must not be

used for processing other objects or

substances. Other applications are

possible if the accessories approved by

the manufacturer are used.

Use the appliance with original acces-

sories only. When using the accessories,

follow the enclosed operating instructions.

This appliance is designed for processing

normal household quantities in the home

or similar quantities in non-industrial

applications.

Non-industrial applications include e.g.

use in employee kitchens in shops,

offices, agricultural and other commercial

businesses, as well as use by guests in

boarding houses, small hotels and similar

dwellings.

Use the appliance for processing normal

quantities of food for domestic use.

Do not exceed permitted maximum

quantities (see “Application examples”).

Before use, read these instructions care-

fully in order to become familiar with im-

portant safety and operating instructions

for this appliance.

If the instructions for correct use of the

appliance are not observed, the

manufacturer’s liability for any resulting

damage will be excluded.

Please keep the operating instructions in

a safe place. If passing on the appliance

to a third party, always include the

operating instructions.

,

WARNING

To avoid risk of injury from the rotating

tools, follow these precautions:

1. Keep hands clear of rotating parts.

While the appliance is operating,

never place fingers in the mixing

bowl. Attach the cover before

operating the appliance!

2. Do not change tools until the drive

has come to a standstill – when the

appliance is switched off, the drive

continues running briefly and stops

in the tool change position.

3. Do not move the swivel arm until the

tool has come to a standstill.

4. For reasons of safety the appliance

cannot be operated unless unused

drives are covered with drive

guards.

5. Before attaching/removing the

continuous-feed shredder, wait until

the drive has come to a standstill

and unplug the power cord. Do not

reach into the feed tube.

,

CAUTION

Use the appliance with original acces-

sories only. When using the accesso-

ries, follow the enclosed operating

instructions.

Use only one tool or accessory at any

one time.

9

ABOUT YOUR KITCHEN MACHINE

Congratulations on having selected one

of the Bosch Styline

®

Series Kitchen

Machines. A series of kitchen machines

that we, and-thankfully-cooking

professionals the world over, feel are the

best household-type kitchen machines

available.

As you read through these instructions,

please pay particular attention to the

IMPORTANT SAFEGUARDS.

Specific safeguards for the attachments,

as well as warnings and cautions, are

provided in each section describing the

operation of that particular attachment.

Bosch Styline

®

Series

Kitchen Machine

The MUM 5 is the highest functioning

kitchen machine with: 450 watt motor,

the three-dimensional mixing system

MultiMotion Drive and the comfortable

EasyArm lift providing strong

performance and comfort.

Powerful engine and MultiMotion drive

The 450-watt motor and the new

electronics provide plenty of power and

high stirring speed. The advanced multi-

dimensional stirring system MultiMotion

Drive ensures that the kneading and

mixing tools move in elliptical orbits.

Thus, each angle is achieved within the

bowl and mix the ingredients quickly and

evenly.

Even heavy doughs, such as bread or

pasta dough, are optimally blended

thanks to the powerful engine and Multi-

Motion drive.

Electronic speed control

Six-position rotary switch is located at the

side of the multifunction arm of the power

unit: 4 speeds plus a momentary speed

position “M” plus a stop position “O/Off”.

Safety systems

Start lock-out:

... to ensure that the appliance can be

switched on in pos. 1 and 3 only, when

the mixing bowl has been inserted and

turned until it locks into place.

Restart lock-out:

If the power is interrupted, the appliance

remains switched on but the motor does

not start running again when the power is

restored.

Overload protection:

If the motor switches itself off while the

appliance is being used, the overload

protection feature has been activated.

A possible cause may be that too much

food was processed at one time.

The EasyArm lift

The EasyArm lift guarantees plenty of

comfort. It supports the lifting and

lowering of the multi-function arm to

replace the tools and attachments.

Four locking positions place attachments

in the most ergonomic position for their

use.

10

Three accessory drives

– A high-speed drive used for blender

and other attachments requiring high-

shaft speed

– A mid-speed drive used for

continuous shredder attachment and

other attachments requiring mid-

range shaft speeds

and

– The MultiMotion drive used for

whisks, dough hook and other

attachments requiring more torque.

Each of these drives is controlled by the

electronic control to optimize the motor

speed for different attachments with

different loads.

Motor drive covers

Two covers are provided to cover high-

speed and mid-speed drive when they

are not in use.

Accessory bag

As a special Styline

®

-extra there is the

practical accessory bag, stowable in the

mixing bowl.

Useful tools and attachments

The Bosch Styline

®

Series Kitchen

Machines are comprised of various

attachments, depending on the system

purchased.

All models of the Bosch Styline

®

Series

Kitchen Machines are provided with

a four-quart Stainless steel mixing bowl

with beating and stirring whisks and

a dough hook.

In addition, the following accessory can

be included: a Continuous Shredder.

See specific instructions for these tools

and attachments. Specific instructions

are located on pages listed below:

Special accessories

To allow you to get the most service from

your Bosch Styline

®

Series Kitchen

Machine, Bosch engineers have

designed a line of special accessories to

expand the usefulness of your machine.

In addition to the attachments that come

with the various Styline

®

Series Kitchen

Machines, there are optional accessories

that can be ordered separately.

These accessories include a blender,

a citrus juicer and a multi-function mixer

(food processor). To view all currently

available accessories, visit the website:

www.bosch-home.com

www.lchef.com

Attachment Pages

Mixing bowl with tools 16

Continuous shredder 19

11

BEFORE STARTING

Unpacking

Carefully remove the power unit from its

packaging and place it on the counter so

it is ready to use. As you remove the

accessories from the carton, check them

against Figure 1 to ensure that all the

standard parts are present.

Electrical specifications

Check to make sure that the voltage on

which your kitchen machine is to operate

is the same as specified on the rating

plate.

Standard North American models have

an electrical power rating of 450-watt

maximum power rating with the

accessory attachment that draws the

most power (some accessory

attachments may draw less power).

Cleaning before using for the

first time

Before using any of the attachments for

the first time it is recommended they be

washed, rinsed well and dried. Of the

attachments supplied, with the systems

in this manual, all parts, except the power

unit, are dishwasher safe:

 The power unit and drive cover

should be wiped with a damp cloth.

If required, use a little detergent.

Then dry the power unit.

Reference values for the

operating speed

These instructions for use contain

a sticker with reference values for the

operating speed of the appliance when

using the tools or accessories.

We recommend attaching this sticker to

the appliance.

,

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can

result in death, fire, or electrical shock.

Page is loading ...

13

Power unit

1 Power unit

2 On / Off button

3Swivel arm

“Easy Armlift” function to support the

upward movement of the arm (see

“Operating positions”).

4 Release button

5 Rotary switch

0/off = Stop

M = Pulse switch at maximum speed,

grip switch for required blending

duration.

Settings 1–4, Operating speed:

1 = low speed – slow,

4 = high speed – fast.

When the appliance has been

switched off (position 0/off), the

appliance runs automatically to the

position for changing the tools.

6 Illuminated ring

The illuminated ring flashes slowly

(30 times per minute) when the unit is

turned on with the On / Off button

(Standby).

This indicates ready to operate. Avoid

any contact with blades or moveable

parts.

The illuminated ring is lit while the

appliance is operating (rotary switch

on M or 1–4).

If the illuminated ring flashes faster

(60 times per minute) in switch

position 1–4, there is an error:

the appliance has been operated

incorrectly or the electronic fuse has

tripped – see section entitled

“Troubleshooting”.

7 Drive for tools (stirring whisk, beating

whisk, dough hook)

8 Drive for continuous-feed shredder or

citrus press.

When not in use, attach the drive

cover.

9 Drive cover

To remove the drive cover, press on

the rear area and remove cover.

10 Drive for blender or multi-function

mixer

When not in use, attach the blender

drive cover.

11 Blender drive cover

12 Cord store

Stow the cord in the cord store.

Bowl with accessories

13 Stainless steel mixing bowl

14 Lid

Tools:

15 Stirring whisk

16 Beating whisk

17 Kneading hook with dough deflector

18 Accessories bag

For storage of the tools and cutting

discs.

Attachments

19 Continuous-feed shredder

20 Blender *

21 Citrus juicer *

22 Multi-function mixer *

* For this attachment there is a separate

user manual.

If an accessory is not included in the

product package, it can be purchased

your local Bosch retailer.

14

OPERATING POSITIONS

The swivel arm features an “EasyArm lift”

function which supports the upwards

movement of the swivel arm.

To move the swivel arm (figure 2):

1. Press the Release button.

2. Move the swivel arm.

Support movement with your hand.

Move the swivel arm until it engages

in the required position.

Figure 2

Operating position 1:

To operate whisk, stirrer or

dough

hook.

Drive 7 (see figure 1)

Operating position 2:

To insert/remove whisk, stirrer or

dough

hook.

Add large quantities of

ingredients.

Operating position 3:

To

operate the continous shredder

or the citrus juicer

.

Drive 8 (see figure 1)

Operating position 4:

To operate the blender or the multi-

function mixer.

Drive 10 (see figure 1)

,

CAUTION

Before operating the appliance, attach

the tool/accessory to the correct drive

and in the correct position and place in

the operating position according to this

section.

Do not operate at no load.

The swivel arm must be engaged in

every operating position.

15

GETTING STARTED

 Place power unit on suitable work

surface.

Before using the machine with any of

the attachments, the power unit

should be placed on a suitable work

surface.

The surface should be sturdy, smooth

and clean; make sure that there is no

flour or oil on the surface. A clean,

smooth surface will provide the best

footing for the suction cup feet on the

power unit and will limit slipping and/

or “walking”.

The installation location should be

near the receptacle.

 Pull the electrical cord to appropriate

length.

 Select attachment you wish to use.

Specific instructions are located on

pages listed below:

,

WARNING

Do not insert main plug until all

preparations for working with the

appliance are complete. Risk of

serious personal injury or death!

Attachment Pages

Mixing bowl with tools 16

Continuous shredder 19

16

WORKING WITH MIXING BOWL AND TOOLS

Stirring whisk

for stirring thicker batters, e.g. cake

batter

Maximum amount of processing:

750 g (26 oz) of flour

Beating whisk

for whisking egg whites, cream and

light batter, e.g. sponge mixture

Maximum amount of processing:

100–600 ml (3–20 fl. oz.) of cream

Dough hook

for kneading heavy dough and

mixing-in ingredients that ought not

be cut (e.g. raisins and chocolate chips)

Maximum amount of processing:

750 g (26 oz) of flour

Working with the bowl and the

tools

Observe the general operating

instructions in the chapter “GETTING

STARTED” on page 15.

 Attach the drive covers.

 Press the Release button and move

the swivel arm to position 2.

 Insert the bowl:

– Tilt the bowl forwards and then set

it down (1.),

– turn counter-clockwise until it locks

into place (2.).

,

WARNING

Do not insert main plug until all

preparations for working with the

appliance are complete. Risk of

serious personal injury or death!

,

WARNING

While the appliance is operating, keep

fingers clear of the mixing bowl. Attach

the lid before operating the appliance!

Do not change tools until the drive has

come to a standstill – when the

appliance is switched off, the drive

continues running briefly and stops in

the tool change position.

Do not move the swivel arm until the

tool has come to a standstill.

For reasons of safety the appliance

may only be operated when unused

drives have been covered with drive

guards.

Risk of injury from rotating tools!

17

 Depending on the processing task,

insert the stirrer, whisk or kneading

hook until it locks into position.

Note:

If using the kneading hook, rotate the

dough deflector until the kneading hook

can lock into position.

 Put the ingredients to be processed

into the bowl.

 Press the Release button and move

the swivel arm to position 1.

Move the swivel arm until it engages

in the required position.

 Attach the lid.

 Plug the electrical cord into

a convenient nearby receptacle.

 Switch the unit on.

Switch the On / Off button to

the “I” (On) position.

The illuminated ring (6, figure 1)

flashes.

 Set the rotary switch to the desired

speed setting.

Our recommendation:

Stirring whisk – first stir in at setting 1,

then select setting 4

Beating whisk – first mix in at setting 1,

then select setting 4

Kneading hook – first stir in at setting 1,

knead at setting 2

18

Adding more ingredients

 Switch off the appliance with the

rotary switch.

 Add more ingredients through the

feed opening in the lid.

or

 Remove lid.

Press the Release button and

move the swivel arm to position 2.

Add ingredients.

After using the appliance

 Switch off the appliance with the

rotary switch.

 Switch the On / Off button to

the “0” (Off) position.

 Pull out the main plug.

 Remove lid.

 Press the Release button and

move the swivel arm to position 2.

 Take the tool out of the drive.

 Remove the bowl.

 Clean all parts, see “Cleaning the

appliance”.

19

WORKING WITH CONTINOUS-FEED SHREDDER

Overview

1 Housing with outlet opening

2 Disc holder

3 Cutting discs

3a

Reversible slicing disc – thick/thin

3b

Reversible shredding disc –

coarse/fine

3c

Grating disc – medium-fine

4 Cover with filling shaft

5Pusher

,

WARNING

Do not insert main plug until all

preparations for working with the

appliance are complete.

Risk of serious personal injury or death!

,

WARNING

Cut Hazard

Do not grip the sharp blades of the

cutting discs. Take hold of cutting

discs by the edge only.

Before attaching/removing the

continuous-feed shredder, wait until

the drive has come to a standstill and

pull out the main plug.

Do not reach into the feed tube.

Moving Parts. Keep fingers out of outlet

opening.

Risk of injury from sharp blades!

,

CAUTION

The continuous-feed shredder must be

completely assembled before use.

Never assemble the continuous-feed

shredder on the base unit.

Operate the continuous-feed shredder

in the indicated operating position

only.

Shredder may be damaged.

20

Protection from overload

To prevent serious damage to your

appliance if the continuous-feed

shredder is overloaded, the drive shaft of

the continuous-feed shredder has a

notch (predetermined breaking point).

If an overload occurs, the drive shafts

breaks at this point.

A new disc holder with drive shaft is

available from your local Bosch retailer.

Disc

Reversible slicing disc – thick/thin

for slicing fruit and vegetables.

Process at setting 3.

Designation on the reversible slicing disc:

“1” for the thick slicing side

“3” for the thin slicing side

Note: The reversible slicing disc is not

suitable for slicing

hard cheese, bread,

rolls or chocolate. Slice boiled potatoes

only when they are cold.

Reversible shredding disc –

coarse/fine

for shredding vegetables, fruit, cheese,

except for hard cheese (e.g. Parmesan).

Processing at setting 2 or 3.

Designation on the reversible shredding

disc:

“2” for the coarse shredding side

“4” for the fine shredding side

Note: The reversible shredding disc is not

suitable for shredding nuts. Shred soft

cheese with the coarse side only at

setting 4.

Grating disc – medium-fine

for grating raw potatoes, hard

cheese (e.g. Parmesan), cooled

chocolate and nuts.

Process at setting 4.

Note: The grating disc is not suitable for

grating soft cheese and cheese slices.

Working with the continuous-

feed shredder

Observe the general operating

instructions in the chapter “GETTING

STARTED” on page 15.

 Remove drive cover from the drive of

the continuous-feed shredder.

Attach blender drive cover.

 Press the Release button and move

the swivel arm to position 2.

21

 Insert the bowl:

– Tilt the bowl forwards and then set

it down (1.),

– turn counter-clockwise until it locks

into place (2.).

 Press the Release button and move

the swivel arm to position 3.

 Hold disc holder at the lower end,

ensuring that the two tips are face up.

 Carefully place the required slicing or

shredding disc onto the tips of the

disc holder. In the case of reversible

discs, ensure that the required side is

face up.

 Grip disc holder at the upper end and

insert into the housing.

 Attach the cover (note mark) and

rotate all the way in a clockwise

direction.

 Place continuous-feed shredder on

the drive and rotate all the way in

a clockwise direction.

 Plug the electrical cord into

a convenient nearby receptacle.

22

 Switch the unit on.

Switch the On / Off button to

the “I” (On) position.

The illuminated ring (6, figure 1)

flashes.

 Set the rotary switch to the desired

speed setting.

 Put food to be processed in the feed

tube and push down with the pusher.

Prevent the cut ingredients from

building up in the outlet opening.

Note: If the food to be processed sticks in

the continuous-feed shredder, switch

appliance off, pull out main plug, wait until

the drive comes to a standstill, remove

cover from the continuous-feed shredder

and empty feed tube.

After using the appliance

 Switch off the appliance with the

rotary switch.

 Switch the On / Off button to

the “0” (Off) position.

 Pull out the main plug.

 Rotate the continuous-feed shredder

in an counter-clockwise direction and

remove.

 Rotate the lid in a counter-clockwise

direction and remove.

23

 Remove disc holder with disc.

To do this, press finger from below

against the drive shaft.

 Clean all parts, see “Cleaning the

appliance”.

Slicing and shredding tips:

– Shopping for fruits and vegetables

that will fit into the feeding tube will

simplify food preparation.

– To ensure even cutting results,

process thin ingredients in bunches.

– Foods that are to be used together

may be sliced together. This can be

used to your advantage.

For example, green onions and celery

are often used together, but feeding

the green onions into the feeding tube

alone is difficult. Try slicing the green

onions at the same time as the celery

by interspersing them in the feeding

tube with the celery.

– Use the slicing disc to shred lettuce.

– Do not overcook potatoes that are to

be sliced. Also it is recommended that

you let them cool first. Potatoes must

be cool and firm to obtain the regular

slices.

24

CLEANING THE APPLIANCE

Cleaning the base unit

 Pull out the main plug.

 Wipe the base unit and drive cover

with a damp cloth. If required, use a

little detergent.

 Then dry the base unit.

Cleaning the bowl and tools

Bowl and tools are dishwasher-safe.

Do not wedge plastic parts in the

dishwasher, as they could be

permanently deformed during the

washing process!

Cleaning the continuous-feed

shredder

All parts of the continuous-feed shredder

are dishwasher-safe.

Tip: To remove the red film after

processing e.g. carrots, pour a little

cooking oil on a cloth and rub the film off

the continuous-feed shredder (not the

cutting discs).

Then rinse the continuous-feed shredder.

Important information:

If required, clean accessories bag.

Follow care instructions in the bag.

NOTICE

Do NOT use abrasive cleaning agents.

Surfaces may be damaged.

,

WARNING

Never immerse the base unit in water

or place under running water.

Do not use a steam cleaner.

Risk of electric shock!

,

WARNING

Cut Hazard

Do not grip the sharp blades or cutting

edges of the cutting discs. Take hold

of cutting discs by the edge only.

Risk of injury from sharp blades!

Page is loading ...

Bosch MUM51U10UC/01 User manual

Bosch MUM51U10UC/01 User manual

in other languages

Related papers

Other documents