2. White Mountain Hearth
  3. Shibl Shroud Panel Kit for DV Fireplaces

White Mountain Hearth Shibl Shroud Panel Kit for DV Fireplaces, Shibl Shroud Panel Kit Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the White Mountain Hearth Shibl Shroud Panel Kit for DV Fireplaces Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
25000-1-1219 Page 1Empire Comfort Systems Inc. • Belleville, IL
INSERT SHOWN WITH SURROUND
WITH BOTTOM RISER INSTALLED
SHROUD SHOWN WITH
SURROUND PANEL KIT INST
ALLED
BOTTOM PANEL
(OPTIONAL)
Sheet metal
Screw (8)
TOP PANEL
LEFT PANEL
RIGHT PANEL
Figure 1
Figure 2
INSERT SHOWN WITH SURROUND
3 PIECE PANEL KIT INSTALLED
SHROUD SHOWN WITH
SURROUND
PANEL KIT INSTALLED
SHIBL SHROUD PANEL KIT
INSTALLATION INSTRUCTIONS
SHIBL CONTEmPORARy SHROUD PANEL KIT FOR USE wITH DIRECT vENT FIREPLACES
INSTRUCTIONS mUST BE LEFT wITH THE OwNER FOR FUTURE REFERENCE AFTER INSTALLATION
ASSEmBLy OF SURROUND PANELS
1. Place all panels face down on a soft surface such as
carpet as shown in Figure 1.
NOTE: If the DV Insert surround kit is 3 pieces, the
bottom shroud panel will not be used.
2.
Align the panel ends together, then install eight (8)
#10 x 1/2” sheet metal screw at each of the corner
anges as shown.
3. Check that face surfaces of the panels are ush and
sides line up, then tighten the screws.
NOTE: For dimensional information, See Figure 3.
25000-1-1219Page 2 Empire Comfort Systems Inc. • Belleville, IL
48”
12”
23-13/16”
2”
6” 6”
36”
37-13/16”
9/16”
SHIBL CONTEmPORARy SHROUD PANEL KIT DImENSIONS
Figure 3
/